HollyHound Posted August 9, 2023 Share Posted August 9, 2023 (edited) Latest addition to my "other" (and daytime) hobby... photography... the Olympus OM-1 😍 Arrived yesterday, and I had a few hours to play with it (ahem, set it up properly 😆).... within a few hours of it arriving, I spotted a Buzzard on a nearby (ish) barn roof and took a quick "snap" with this camera... the bird auto detect, auto-focus, ergonomics and image quality are just amazing, and it almost feels like cheating (some skill still required... so more practice needed!) Coupled with the Leica 100-400 (equivalent to 200-800 full frame), this is for sure going to become my primary camera, alongside the Lumix G9 I started with. I have no doubt it will be great for lunar photography too 😃 Now, I just need to find more time again 😬🤞 Edited August 9, 2023 by HollyHound Added photos 26 Link to comment Share on other sites More sharing options...
josefk Posted August 10, 2023 Share Posted August 10, 2023 😒😒😒! 8 Link to comment Share on other sites More sharing options...
saac Posted August 11, 2023 Share Posted August 11, 2023 (edited) Not your usual astro kit but I was getting so fed up with my various astro related toys scattered around the house, camera battery chargers or usb cables never at hand when needed. So a trip to ScrewFix and here's the solution, quite happy with it ; slowly filling it up but now at least I will know what room I should be looking in Jim Edited August 11, 2023 by saac 13 Link to comment Share on other sites More sharing options...
Ratlet Posted August 11, 2023 Share Posted August 11, 2023 1 hour ago, saac said: Not your usual astro kit but I was getting so fed up with my various astro related toys scattered around the house, camera battery chargers or usb cables never at hand when needed. So a trip to ScrewFix and here's the solution, quite happy with it ; slowly filling it up but now at least I will know what room I should be looking in Jim Just need a Takahashi sticker on it. Beautiful colour. Always thought tool drawers only came in red or blue... Or rust. 2 3 Link to comment Share on other sites More sharing options...
Ratlet Posted August 11, 2023 Share Posted August 11, 2023 I have joined the gang. I really liked my setting circles and I'm glad I've got them as a backup, but they only really work on the dob, not my alt az mount. Also joining will be my kids who are going to get the scope (transplanted to some rings). I've got an ST80 and a couple newts but this is the first 'proper' sized refractor I've held and seen up close. There is definitely something 'tingly' about a long refractor. Can believe how light it is though. Also got a 10" astroessential dew shield after a couple abortive DIY attempts. Last session got dewed out on the secondary and it's the absolute pits. Tested it on the scope and it fits with a couple cm (like about 2cm)of overlap. I'm going to migrate to heated dew removers so picked up a secondary dew heater as well. It's hopefully going to be a contingency. 10 Link to comment Share on other sites More sharing options...
Nakedgun Posted August 11, 2023 Share Posted August 11, 2023 1 hour ago, saac said: Not your usual astro kit but I was getting so fed up with my various astro related toys scattered around the house, camera battery chargers or usb cables never at hand when needed. So a trip to ScrewFix and here's the solution, quite happy with it ; slowly filling it up but now at least I will know what room I should be looking in Jim ~ Fits nicely into the space provided. Do you think it's big enough? . 1 Link to comment Share on other sites More sharing options...
saac Posted August 11, 2023 Share Posted August 11, 2023 2 hours ago, Nakedgun said: ~ Fits nicely into the space provided. Do you think it's big enough? . You know what it's like, astro kit has an annoying habit of multiplying when you are not looking Jim 5 Link to comment Share on other sites More sharing options...
Space Oddities Posted August 15, 2023 Share Posted August 15, 2023 The postman delivered a few packages in the last couple weeks! A very nice looking Sky-Watcher Startravel 120, together with a GSO Focuser (I have to admit the stock focuser went straight back to the box) and an ES 82° 30mm eyepiece. This will make a nice grab and go scope! I also got a handle and a matching dovetail bar, both from the brand Bresser, which makes the scope easier to carry. I also replaced some parts, like the tube rings' knobs, I find them really hard to fasten properly. The focuser is great, but the rotating functionality wasn't very smooth. Turns out, the 3 set screws are either too lose or too tight... I couldn't find the right balance and was afraid the whole thing would wobble, so I removed the set screws and used some thumb screws I had lying around. That's 4 screws to turn if I want to rotate the focuser, but at least it's secure and doesn't require any tool. Finally I salvaged a couple finder shoes and attached them on the handle and the focuser, to fit a finder, ASIAIR or phone holder. I also need to figure out how go fit my Telrad in here... Maybe some 3D printer support? Time will tell! Anyways... I had first light a few days ago, between clouds, and could observe Andromeda and a explore the Cygnus region, before clouds came back. The scope is very nice and I couldn't see any chromatic aberration so far. Once the Moon is back and the clouds are gone, I'm going to give this a try to see how bad CA is, and see if my filters can improve the view somehow. 14 Link to comment Share on other sites More sharing options...
StevieDvd Posted August 15, 2023 Share Posted August 15, 2023 On 11/08/2023 at 20:13, Ratlet said: I have joined the gang. I really liked my setting circles and I'm glad I've got them as a backup, but they only really work on the dob, not my alt az mount. Also joining will be my kids who are going to get the scope (transplanted to some rings). I've got an ST80 and a couple newts but this is the first 'proper' sized refractor I've held and seen up close. There is definitely something 'tingly' about a long refractor. Can believe how light it is though. Also got a 10" astroessential dew shield after a couple abortive DIY attempts. Last session got dewed out on the secondary and it's the absolute pits. Tested it on the scope and it fits with a couple cm (like about 2cm)of overlap. I'm going to migrate to heated dew removers so picked up a secondary dew heater as well. It's hopefully going to be a contingency. It's suprisingly good for such a light scope. Though I cannibalised my upgraded ST80 and swapped the tube rings and focuser with the Celestron 80AZ. The focuser is a GSO one and has a shorter drawtube so needs an extension or 2" diagonal. Even with those added it's still light and gave some good viewing, including Saturn, last week when a fellow SGL'er came over to see the Starsense in action. 1 Link to comment Share on other sites More sharing options...
Ratlet Posted August 15, 2023 Share Posted August 15, 2023 (edited) 41 minutes ago, StevieDvd said: It's suprisingly good for such a light scope. Though I cannibalised my upgraded ST80 and swapped the tube rings and focuser with the Celestron 80AZ. The focuser is a GSO one and has a shorter drawtube so needs an extension or 2" diagonal. Even with those added it's still light and gave some good viewing, including Saturn, last week when a fellow SGL'er came over to see the Starsense in action. I'm very impressed to be honest. I usually test my scopes out on a flag pole I can see from my house and it was remarkably CA free and pleasingly sharp, although this is no guarantee for astronomy. The focuser is pretty naff though and I suspect it will want upgrading. My mind rebels paying as much for the focuser as I did for the scope though! Need to find a middle ground somehow. I think it'll do well for planetary, doubles and for quick trips outside darting through the clouds. Hoping it will give me a flavour for refractors as I've got my eye on one of the Starfield 102's. Edited August 15, 2023 by Ratlet 2 Link to comment Share on other sites More sharing options...
bosun21 Posted August 15, 2023 Share Posted August 15, 2023 Delivered today a Baader Sky Surfer III for the 150PL and a dew shield for it as well. I sure could have done with the dew shield last night though. 10 Link to comment Share on other sites More sharing options...
Astroscot2 Posted August 16, 2023 Share Posted August 16, 2023 23 hours ago, Space Oddities said: The postman delivered a few packages in the last couple weeks! A very nice looking Sky-Watcher Startravel 120, together with a GSO Focuser (I have to admit the stock focuser went straight back to the box) and an ES 82° 30mm eyepiece. This will make a nice grab and go scope! I also got a handle and a matching dovetail bar, both from the brand Bresser, which makes the scope easier to carry. I also replaced some parts, like the tube rings' knobs, I find them really hard to fasten properly. The focuser is great, but the rotating functionality wasn't very smooth. Turns out, the 3 set screws are either too lose or too tight... I couldn't find the right balance and was afraid the whole thing would wobble, so I removed the set screws and used some thumb screws I had lying around. That's 4 screws to turn if I want to rotate the focuser, but at least it's secure and doesn't require any tool. Finally I salvaged a couple finder shoes and attached them on the handle and the focuser, to fit a finder, ASIAIR or phone holder. I also need to figure out how go fit my Telrad in here... Maybe some 3D printer support? Time will tell! Anyways... I had first light a few days ago, between clouds, and could observe Andromeda and a explore the Cygnus region, before clouds came back. The scope is very nice and I couldn't see any chromatic aberration so far. Once the Moon is back and the clouds are gone, I'm going to give this a try to see how bad CA is, and see if my filters can improve the view somehow. Loving the pictures in the background ... 1 Link to comment Share on other sites More sharing options...
glafnazur Posted August 16, 2023 Share Posted August 16, 2023 On 15/08/2023 at 10:16, Space Oddities said: The postman delivered a few packages in the last couple weeks! A very nice looking Sky-Watcher Startravel 120, together with a GSO Focuser (I have to admit the stock focuser went straight back to the box) and an ES 82° 30mm eyepiece. This will make a nice grab and go scope! I also got a handle and a matching dovetail bar, both from the brand Bresser, which makes the scope easier to carry. I also replaced some parts, like the tube rings' knobs, I find them really hard to fasten properly. The focuser is great, but the rotating functionality wasn't very smooth. Turns out, the 3 set screws are either too lose or too tight... I couldn't find the right balance and was afraid the whole thing would wobble, so I removed the set screws and used some thumb screws I had lying around. That's 4 screws to turn if I want to rotate the focuser, but at least it's secure and doesn't require any tool. Finally I salvaged a couple finder shoes and attached them on the handle and the focuser, to fit a finder, ASIAIR or phone holder. I also need to figure out how go fit my Telrad in here... Maybe some 3D printer support? Time will tell! Anyways... I had first light a few days ago, between clouds, and could observe Andromeda and a explore the Cygnus region, before clouds came back. The scope is very nice and I couldn't see any chromatic aberration so far. Once the Moon is back and the clouds are gone, I'm going to give this a try to see how bad CA is, and see if my filters can improve the view somehow. Very nice, I am thinking of getting an SW ST120 as a grab and go scope when I can scrape up enough money. Link to comment Share on other sites More sharing options...
ScouseSpaceCadet Posted August 16, 2023 Share Posted August 16, 2023 (edited) 1 hour ago, glafnazur said: Very nice, I am thinking of getting an SW ST120 as a grab and go scope when I can scrape up enough money. They're a fun widefield refractor but a one trick pony. Not very grabby or goey to me hence why I sold it. I wouldn't knock the SW120ST but don't expect to enjoy heading past 100x magnification or using a titchy mount. 🙂 Edited August 16, 2023 by ScouseSpaceCadet Titchy 2 Link to comment Share on other sites More sharing options...
Elbasso Posted August 16, 2023 Share Posted August 16, 2023 Received the ridiculously expensive L-Ultimate today and matching filter drawer. I sincerely hope my nebula images will improve ridiculously much as well 🤣 10 Link to comment Share on other sites More sharing options...
glafnazur Posted August 16, 2023 Share Posted August 16, 2023 20 minutes ago, ScouseSpaceCadet said: They're a fun widefield refractor but a one trick pony. Not very grabby or goey to me hence why I sold it. I wouldn't knock the SW120ST but don't expect to enjoy heading past 100x magnification or using a itchy mount. 🙂 I just want it for widefield, I was thinking of mounting it on a Sky-Watcher AZ GTi WiFi Alt-Az. 1 Link to comment Share on other sites More sharing options...
ScouseSpaceCadet Posted August 16, 2023 Share Posted August 16, 2023 4 minutes ago, glafnazur said: I just want it for widefield, I was thinking of mounting it on a Sky-Watcher AZ GTi WiFi Alt-Az. At the very least the AZGTI will not perform very well and at worst break... I've tried that combo... Link to comment Share on other sites More sharing options...
glafnazur Posted August 16, 2023 Share Posted August 16, 2023 32 minutes ago, ScouseSpaceCadet said: At the very least the AZGTI will not perform very well and at worst break... I've tried that combo... Thanks, I thought it'd be ok with the mount saying 5kg and the scope being 4.1kg, I'll have to rethink whilst I try to get some money together. Maybe a 102 instead 1 Link to comment Share on other sites More sharing options...
Space Oddities Posted August 18, 2023 Share Posted August 18, 2023 On 16/08/2023 at 18:32, glafnazur said: Thanks, I thought it'd be ok with the mount saying 5kg and the scope being 4.1kg, I'll have to rethink whilst I try to get some money together. Maybe a 102 instead Yes I confirm a 120ST would probably be too much for the little AZ-GTi mount, but I read that people were using the 102 with it It would make a good grab and go setup as well! On 16/08/2023 at 10:41, Astroscot2 said: Loving the pictures in the background ... Love it too! I have 3 of these actually, they are engravings from Jules Verne books that I found on Etsy. I happen to live in Jule Verne's hometown, in a boulevard that bears its name, so I thought it was à propos. Always loved his books as a kid! I wish I lived in one of the streets nearby though, I mean, how cool would it be to have as your address "123, Captain Nemo street" Here's the shop I got it from, they make very good quality prints (my picture doesn't do justice to them): https://www.etsy.com/fr/shop/AtelierGaronne 9 1 Link to comment Share on other sites More sharing options...
glafnazur Posted August 18, 2023 Share Posted August 18, 2023 2 hours ago, Space Oddities said: Yes I confirm a 120ST would probably be too much for the little AZ-GTi mount, but I read that people were using the 102 with it It would make a good grab and go setup as well! Love it too! I have 3 of these actually, they are engravings from Jules Verne books that I found on Etsy. I happen to live in Jule Verne's hometown, in a boulevard that bears its name, so I thought it was à propos. Always loved his books as a kid! I wish I lived in one of the streets nearby though, I mean, how cool would it be to have as your address "123, Captain Nemo street" Here's the shop I got it from, they make very good quality prints (my picture doesn't do justice to them): https://www.etsy.com/fr/shop/AtelierGaronne They're really cool Just seeing them makes me want to read the books again. 1 Link to comment Share on other sites More sharing options...
Zermelo Posted August 18, 2023 Share Posted August 18, 2023 I've been thinking about ClickLocks since this thread, but since I was quite happy with the performance of my Revelation diagonal, I went for a reducer that will live permanently in it 9 Link to comment Share on other sites More sharing options...
moggi1964 Posted August 18, 2023 Share Posted August 18, 2023 On 09/08/2023 at 17:23, HollyHound said: Latest addition to my "other" (and daytime) hobby... photography... the Olympus OM-1 😍 Arrived yesterday, and I had a few hours to play with it (ahem, set it up properly 😆).... within a few hours of it arriving, I spotted a Buzzard on a nearby (ish) barn roof and took a quick "snap" with this camera... the bird auto detect, auto-focus, ergonomics and image quality are just amazing, and it almost feels like cheating (some skill still required... so more practice needed!) Coupled with the Leica 100-400 (equivalent to 200-800 full frame), this is for sure going to become my primary camera, alongside the Lumix G9 I started with. I have no doubt it will be great for lunar photography too 😃 Now, I just need to find more time again 😬🤞 A fabulous setup Gary and a great 'first image'. I own an Olympus EM1 MkII and it's a terrific performer with my Oly glass and my vintage glass too. Can't wait to some lunar shots from it. Do you use an LPL filter? (Sorry, drifted off topic - you can PM me if you like). 1 Link to comment Share on other sites More sharing options...
saac Posted August 18, 2023 Share Posted August 18, 2023 (edited) These little babies were patiently waiting for me when I arrived home - nice postman . My old wheels, well let's say if longboards had MOTs it would be a definite fail. 80 mm of sweet rolling happiness Jim Edited August 18, 2023 by saac 4 Link to comment Share on other sites More sharing options...
HollyHound Posted August 18, 2023 Share Posted August 18, 2023 2 hours ago, moggi1964 said: A fabulous setup Gary and a great 'first image'. I own an Olympus EM1 MkII and it's a terrific performer with my Oly glass and my vintage glass too. Can't wait to some lunar shots from it. Do you use an LPL filter? (Sorry, drifted off topic - you can PM me if you like). Thanks 🙂 The EM1 MkII is a great camera... the only real difference with the OM-1 is the extra subject detection, faster auto-focus and frame rates up to 120, although the Heron photos I took (on the "Wildlife" post) where only done on single frame (was still learning the camera then). My current avatar (moon) was taken with the PL100-400 (at 400mm) on my Lumix GX8, so will be very interested to see what I can get with this one (sensor is a little better apparently)... not using filters at the moment, as it's fairly dark(ish) sky here on the farm (Bortle 5) 🤞 1 Link to comment Share on other sites More sharing options...
moggi1964 Posted August 18, 2023 Share Posted August 18, 2023 8 minutes ago, saac said: These little babies were patiently for me when I arrived home - nice postman . My old wheels, well let's say if longboard had MOTs it would be a definite fail. 80 mm of sheet rolling happiness Jim Takes me back to drooling over Kryptonite wheels and Gullwing trucks back in the 70's. My mate could afford those for his skateboard, I had to settle for something from Woolworths but I was faster than him when I laid down on my skateboard 😁 Totally bonkers now I think about it: chin about 3" above the road. The naivety of youth. 2 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now