David Smith Posted July 21, 2016 Share Posted July 21, 2016 Happily grabbing a shed load of Ca-K data yesterday when all of a sudden - laptop blue screen of death! That was the last time it did anything useful and all my attempts to recover it have failed. It's off to the laptop hospital this morning, fingers crossed. Until it returns I will be white light only. Link to comment Share on other sites More sharing options...
xtreemchaos Posted July 21, 2016 Share Posted July 21, 2016 darn badluck Dave, ive had it a few times myself, i hope your lappy feels better soon. charl Link to comment Share on other sites More sharing options...
Stu Posted July 21, 2016 Share Posted July 21, 2016 Nightmare Dave. Do you have all your imaging data backed up somewhere else? Hope the doctor has success!! Link to comment Share on other sites More sharing options...
David Smith Posted July 21, 2016 Author Share Posted July 21, 2016 Thanks both. @Stu Fortunately most of it is backed up either online or on the family desktop, phew! The only loss will be all the data from yesterday's session but in the grand scheme of things that seems an acceptable loss. Link to comment Share on other sites More sharing options...
Davey-T Posted July 21, 2016 Share Posted July 21, 2016 Shame about that David, haven't had a BSOD for years, did you try hitting it with a big hammer, works for me, perhaps it's a M'Soft ploy to get you to upgrade to Win10 Dave Link to comment Share on other sites More sharing options...
Steve Ward Posted July 21, 2016 Share Posted July 21, 2016 Ouch , hope it's not terminal ... if you need someone to look after the CaK unit for a while just ask ... Link to comment Share on other sites More sharing options...
cshahar Posted July 21, 2016 Share Posted July 21, 2016 Ouch. I hope you can retrieve the data Dave. I buy used laptops and always expect the worse. Mine is subjected to the heat of the sun (it is mostly covered but often gets sunlight beating down on parts of it ) , and I know they weren't built for that sort of thing. Our reliance on delicate electronics has good and bad aspects. Good luck with it! -Charles Link to comment Share on other sites More sharing options...
David Smith Posted July 21, 2016 Author Share Posted July 21, 2016 It's already running Win 10 so I can't even blame it on that! I have been having with SharpCap lately where it crashes every time I switch from one settings profile to the other. I have just worked with it as I have not gotten around to trying to debug it. Possible that the crashes finally caused some sort of corruption and this caused the failure. However I would have expected to be able to recover this using recovery partition.....alas not. Link to comment Share on other sites More sharing options...
Steve Ward Posted July 21, 2016 Share Posted July 21, 2016 I was having trouble with SharpCap yesterday , not used it for a while now but it just wouldn't play with the SPC set up as it always is ... ? Link to comment Share on other sites More sharing options...
Steve Ward Posted July 21, 2016 Share Posted July 21, 2016 Just had a look on the SharpCap site and there are old versions still available , think I'll dump the newer version and revert to one that I know works , updates eh ... Link to comment Share on other sites More sharing options...
laudropb Posted July 21, 2016 Share Posted July 21, 2016 Hope the doc can find a quick cure for you. Link to comment Share on other sites More sharing options...
David Smith Posted July 21, 2016 Author Share Posted July 21, 2016 I am still using 2.6 as I found the newer versions crashed even more or would not connect to the QHY5 at all. I also rolled back the driver to the originally installed version, which did help a bit. Link to comment Share on other sites More sharing options...
Davey-T Posted July 21, 2016 Share Posted July 21, 2016 You should be able to boot from a USB stick if it's just the drive that has died, worth fitting a SSD disc if you have to have a new one. Dave Link to comment Share on other sites More sharing options...
Tzitzis Posted July 21, 2016 Share Posted July 21, 2016 I wish it recovers soon Dave. That must have been awful Link to comment Share on other sites More sharing options...
David Smith Posted July 21, 2016 Author Share Posted July 21, 2016 21 minutes ago, Davey-T said: You should be able to boot from a USB stick if it's just the drive that has died, worth fitting a SSD disc if you have to have a new one. Dave I managed to boot from a DVD and could "see" the disk which is promising. Link to comment Share on other sites More sharing options...
David Smith Posted July 21, 2016 Author Share Posted July 21, 2016 6 minutes ago, Tzitzis said: I wish it recovers soon Dave. That must have been awful Annoying as we are actually having some decent weather for a change! Link to comment Share on other sites More sharing options...
Ibbo! Posted July 21, 2016 Share Posted July 21, 2016 that is annoying Link to comment Share on other sites More sharing options...
Radec Posted July 21, 2016 Share Posted July 21, 2016 Sorry to hear that. I'm mostly a Mac user & so unfamiliar with the BSOD ;-) Shame that most of the astro-related software doesn't work with Mac. I do have a windows7 lappy though and was trying to experiment with Sharpcap 2.9 yesterday. Couldn't get anything but a blue sun & I don't think that's right lol Link to comment Share on other sites More sharing options...
Pete Presland Posted July 21, 2016 Share Posted July 21, 2016 A gutter David hopefully you get the problem sorted soon! Link to comment Share on other sites More sharing options...
paulastro Posted July 21, 2016 Share Posted July 21, 2016 Oh dear David, I am sorry about your misfortune and loosing your date. I hope you'll be fully operational again asap. Link to comment Share on other sites More sharing options...
David Smith Posted July 21, 2016 Author Share Posted July 21, 2016 Thanks all. Picked the laptop up tonight. They had to wipe the hard drive and reinstall Windows so I have spent the evening trying to get it back to where I need it. I think I have most of the packages I need back on but have not tested them all. Does anyone know where I can get an old version of a QHY driver? The version of the QHY5-II Mono driver on the QHY website is not the one I was using before and I don't seem to have a copy of it The newer driver seems to work but I do not have all the options I had previously, including the "Mono16" colourspace. Link to comment Share on other sites More sharing options...
Iainp Posted July 21, 2016 Share Posted July 21, 2016 Nasty. I must admit, I never thought about the risk of heat on the laptop. Good luck getting up and running again. Iain Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.