Jump to content

Banner.jpg.b89429c566825f6ab32bcafbada449c9.jpg

Starlight 1

Members
 View Profile  See their activity

  • Posts

    3,302

  • Joined

  • Last visited

  • Days Won

    1

 Content Type 

Everything posted by Starlight 1

  1. Starlight 1
    I put a tray over the top so the rain run in the tray and drip out over the unit.
  2. Starlight 1
    My is Kemo , it do have gold plated strips.
  3. Starlight 1
    I do have one , It do not like clean water so off the roof good, and you have to off set the unit , not flat .
  4. Starlight 1
    See how it go with the parts you have on the way to you , Look at new pics the only part I can not do is the baynet to camera as I can not cut that on a lathe.
  5. Starlight 1
    I do have them 2 parts . So what size have the long one got to be after cut down. I look in the shed later and I send and pm on parts with pic if any help.
  6. Starlight 1
    I can cut down on the lathe if its to big , I give up astro but have lots of bits something that may do the job But i can not work out what you are looking for.
  7. Starlight 1
    I put a fuse on + &- battery in dark easy to get the wrong way round.
  8. Starlight 1
    I done the same today, wife is allway saying where is that good look man , I reply where was you looking. so looking at some old photo.
  9. Starlight 1
    If I started all over again ,I be looking at a 10x10ft any thing under that I go shed on wheels to move the shed and make it a warm room .
  10. Starlight 1
    I done a roof run off front and back , anyone that may have a light on the top of the roof will stop some of it and as the sky move round the roof will not be in the way.
  11. Starlight 1
    You have to take something for them to put it in.
  12. Starlight 1
    Go to a shop that sell marine fish about 20p a lt.
  13. Starlight 1
    You can use Sugru its a mouldable glue.
  14. Starlight 1
    All ways rember the sky is not black . Well from Norwich it not.
  15. Starlight 1
    My dad said to me do not ask me for money , I never did and my 2 have to do the same as I did . go and work for it.
  16. Starlight 1

    Paul you have a PM , So I can get the mount in the post for you

  17. Starlight 1
    After going up and down the page 10 times (with)
  18. Starlight 1
    clear here in Norwich as well I look at the Moon before the Moon and me go to bed.
  19. Starlight 1
    If you made the two parts to look like a L it will have a wall on the inside and outside water can not get in.
  20. Starlight 1
    I had 18kg on a heq5 and it work ok , I try putting a 250pds on it and it was no good , will not hold in any wind at all. I got the az-eq6 just for that scope . Then the mount and scope was to big to fit in my 6x8 shed with out taking it down to close the roof. I give up .
  21. Starlight 1
    I do any lathe work for you Gina ,its only a little lathe so not over 5 ins round or it not fit in.
  22. Starlight 1
    Yes will be hard to cut back open again.
  23. Starlight 1
    Try 2 pack epoxy , use it alot on RC boats.
  24. Starlight 1

    Summer is a bad time for me I have lots to do , But I be back at the end of the year when the nights pull back in .

  25. Starlight 1
    I started work on my skycam again after looking at your post. and put it aside again thinking how can I get round that . so sometime a good night sleep help the next day Gina.
×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue. By using this site, you agree to our Terms of Use.