don4l

I never take binned flats. My stacking software (CCDStack) happily uses unbinned flats with binned images. Is it worth trying to use software binning?

What an enjoyable thread. Hoping you get plenty more clear skies! The images are gorgeous, and the island looks lovely.

Thanks Olly. Lifting the green didn't turn out to be as simple as I thought. Parts of the image turned an obvious green when I gave it enough to remove the magenta. To produce this version, I lifted the green a bit on the whole image, and then duplicated it. I applied a layer mask (greyscale of image) and adjusted the green up a bit more in that layer. I think that I can still see some magenta, but I am not good with colour, so I wouldn't bet on it. I've cropped it a bit more to save bandwidth.

I *think* that I've managed to do as you have suggested. I used your method of lifting the left hand side of the curve in "curves adjustment" on the RGB data. I don't know if I have lifted it enough.

Thanks Olly. I'll have a go at reducing the background noise in the colour. I've tried to save my work as I went along, so I should be able to go back.

CCDCiel has an option to display the image frame as part of its platesolving routine. I suspect that other capture software has the same feature. I platesolve a reference image from the first night's session, and then I have it as a background image in my Cartes du Ciel. The next night, I platesolve and display the image frame in CdC. I just rotate the camera until the frame lines up with the background image. It usually takes no more that three attempts to be aligned to less than a degree. The beauty is that you don't need to remember any rotation angles or numbers. It takes about 2 minutes to be precisely aligned and rotated using 2 second exposures for the platesolving. Here is a screenshot in which I would need to move the camera a bit to the left and rotate it a bit clockwise when I stand behind it.

This is my first proper LRGB image, and I am very pleased with it. I've always had a brain block in understanding how an "L" could bring quality to a low res RGB image. A few weeks ago, I read that in fact the RGB just colourised the black and white "L" image. This may be obvious to some, but I had never thought of it that way before. I ran a test in the Gimp. I put a mono layer of some old "L" over a colour layer with the the mode set to "luminance". Then I reversed the layers, and changed the blend mode to "HSL Colour". The results were identical! The only difference was that I can get my head around colourising a mono image. 50m L, 25m R, 40m G, 55mB and 40m Ha. (RGB 2x2). Tak FSQ106, G3-16200, EQ6, CCDCiel, PHD2, CCDStack, Gimp Any advice would be very welcome.

Excellent result for 19 minutes. You are dead right to be pleased. I like both versions, but if I had to pick one, then I would go for the second one.

The reports of Mag -1 are just wrong unfortunately. They appear to emanate from a bug/error at the MPC (minor planets centre) who provide the data for CdC and others. This is a terrible pity because it is due to pass right in front of NGC2403 on the night of 23(I think) of January. I was going to book the next day as holiday so that I could stay up to photograph it. Now, it doesn't look like it will be worth doing. [sigh]

I agree with Carole. Go in June. You won't be missing anything here but you can image from 10 at night until 5 in the morning, and you will get to see stuff that you cannot see from here.

Thanks Helen. I've signed up. Let's hope that I learn something.

It's a lovely image. I know that If I had taken it I wouldn't bother gathering any more data because I wouldn't be able to reproduce the balance of colours and contrasts if I started again.

I'd like to think that I would have figured this out before spending hours on Google, (and some money on something that might, or might not have worked). I've hung 3 sheets of paper over the panel and it works a treat.

I thought that I should post this update as I tested the light box last night on my FSQ106 at F5. I think that it will need something to reduce the light. I've seen people refer to some sort of film that can be used for this. It works with 3nm narrowband filters. It was too bright with L, R, G and B filters. My minimum exposure is 0.2s, and the CCD was fully saturated. I'll be very surprised if it works at F10 on my Tal200. Even if it does, I don't like to take flats at minimum exposure, so I will still need something to reduce the light.

That's lovely!

Thank you all. I've got a much clearer picture now. I'll get back to Google and carry on looking. I'm looking for three separate bits, the Strap, the controller to vary the voltage(dimmer), and a 12V supply.

That looks like it should be fine. I recently bought this one :- https://www.amazon.co.uk/gp/product/B00OJ9PQWU/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1 [edit] I've just seen Wim's post, and I am fairly sure that mine produces an even illumination. It may be too bright even on the dimmest setting - I'll find out when I test it. There is a photo of mine illuminated in the "what the Postman..." thread :- ===== Posted November 6 A new A3 Light box which should make a cost effective flat field source. Having tested it, I'm also thinking that it would make a decent light for an observatory or shed. I haven't used it as a light box yet, but it looks fine. It arrived promptly, was well packed and has it's own power cube.

I'm having problems with dew lately. A quick search suggests that dew heaters are typically powered by a "controller" with a car cigarette lighter adapter. I don't have any such power sources. So, I have a couple of questions. Is there anything special about these controllers? Do I need one, or would a 12v power cube directly power a dew heater belt? I'm also a bit unsure about how effective the dew heaters are. Currently, I use a hair dryer whenever I suspect that things are misting up. I don't really like doing this because it throws the focus out, and it takes 10 mins to recover. If I get dew heaters will I be able to do away with the hair dryer completely? Thanks Don

Have you taken off the lens that comes with the ASI?

I'm not usually a fan of starless images, but I do like this. I can see structures that I haven't seen/noticed before. Nice.

That's a very nice image. I've never tried to do a decent dark nebula, and this looks like it should be my first.

Thank you, Han You've more than answered my questions. I was reluctant to change the results that came from the Calibration routine because I didn't really understand what they meant. I'll have a proper play with Dynamic focusing next time that I am out. I had assumed that V curve was the recommended option.

I have an old Astronomik SII filter which produces horrible halos. I haven't found any method of dealing with them. I'm yet to be convinced that an SII filter would represent value for money, and I'm not sure how my other half would respond if I brought the subject up now. I've wondered about simulating an SII channel for a fake SHO image. SII data usually looks like a different stretch of Ha data (to me anyway).

Thank you... and thanks for asking about the fainter nebulosity. There is only 2H 16m of data in this, I had assumed that any attempt to bring out any more would just show up noiseness. As it happens, it did become more noisy, but I've learned a method of controlling it (I think). I opened up my working image in the Gimp and added a new layer with the original data. I changed the stretching so that the faint stuff was more visible. I then colourised this and added it in "Lighten" mode. At this point, it was quite noisy, so I applied a gaussian blur - which didn't seem to affect the rest of the image, but fixed the new faint stuff! Hooray!!!! I've never had any success with blurring before. Anyway, here is my effort at bringing out the fainter stuff. I've no idea if people will think that it is better or worse than the original. (The stars will be a bit different in this - ignore them please).

I'll have a go... My comments are based on CCD type cameras. There are some differences with CMOS type sensors. If you take an image with the lens covered ( a dark), then there will be some variations in pixel values, and also some/many hot pixels. These will appear as very bright Red, green, or blue dots in your final image. However, they tend to appear in exactly the same spot in every image, so if you know where they are, then you can subtract them, or cancel them out. The effect varies with temperature, and exposure duration. So you take a bunch of darks at the same temperature and exposure to make a master dark. If you take an image of a uniformly illuminated white surface, then the image that you get will have imperfections caused by optical issues and by dust, dirt etc in your optical system. Processing software will use these flats to balance up your image to cancel out the imperfections. The bias is the signal that is present when you just read the dark sensor in the shortest possible exposure. This will be in every image that you take, including your flats and your darks. So, to get a true flat that can be used with any length of exposure, then you should remove the bias before producing the final flat. I remember that when I first read about this, it seemed awfully confusing. Focusing, tracking and simply just finding the target are all more important IMHO.