scotty38

Unless it's been fixed in the last few months APP bins most of the fits info in its final images. I had issues with this for ages and asked for it to be looked at. It was on the list to be remedied but don't know if it has yet.

Glad you finally listened 🤣🤣🤣 🤣

I must admit I'm surprised but there you go. Did you just use the WBPP defaults as it were as I wouldn't expect there's anything wrong with WBPP as such but if there is it would be worth posting on the PI forum?

Ok will be interesting to see if there is any difference

Did you blink or look at all 282 of your lights? Any chance there is any of them with this in them, maybe caught the edge of the Obs or something???

The mono is the 492 sensor and the colour the 294. What the fundamental differences are I couldn't tell you. I have had the ZWO 294mc and now have a QHY 294m and both need careful calibration frames but once you sort that out the cameras are fine. I had a bit of pain with the 294mc but I was using an l-extreme filter which just adds to it but once sorted (there's a thread on here somewhere) it was great. I've only been imaging for just under 2 years and the 294mc was my first camera so it can be done as a beginner no worries.

Yes I think I already said that....

I'm not sure what plug type the ASIAIR needs but I bought eh Silicon cables from FLO like this: https://www.firstlightoptics.com/astronomy-cables-leads-accessories/lynx-astro-silicone-power-cable-25mm-dc-jack.html I bought the ones with the ring tongues, one dedicated to my AZ-EQ6 and then one with a 2.1mm end for my Pegasus powerbox. When my kit was outside I put the whole shooting match, laptop and PSU in one of the plastic toybox type of box with a lid and no issues at all. I probably wouldn't leave it outside naked, certainly not at this time of year anyway. It says it's designed for indoor use on the instructions but they all say that and 90% of astro folk with these will be leaving them outside in some way or other.

It'll work and I've used similar but I can highly recommend both of the Nevada power supplies that FLO sells. Yes they are more money but you can kiss goodbye to any power issues in the future., plus they can be used to power other stuff too. Oh and the EQ6 mounts thrive on having more than 12v supplied too which was the issue I had with the brick type especially if you try to run more than just the mount.

The thing is you cut the back of the scope off so are you absolutely sure that's not part of any issue you're seeing? If that's not been machined 100% in line with the rest of the optics I guess you're on a hiding to nothing.

You can use "Loop until Altitude Below" and then run an end sequence to stop guiding etc etc

You may have better processing skills than me though... I'm just processing the extra 150 frames from last night so will be interesting to see how much difference it makes

Yes agreed on the RASA and I'm imaging as we speak so hopefully will have double the amount tomorrow. No, no starless imaging just a channel combination and stretch. I figured I would need more data so just wanted a quick look at what I had. Will try starless etc tomorrow, thanks.

Like most of the other threads I think you're all talking to yourselves anyway 🤣

I captured 150 5 minute SHO frames last night and when combined and a basic stretch it shows virtually nothing....... 🤣 Might have to up my game here.....

Sorry to see that, hope it's sorted quickly!

My sequence is ready to go 🙂 If it stays clear all night I should get a good run at it...

There is no way that scope is balanced.... Amateur hour.... 🤣😂

Nice image and added to my list so will try tonight if the forecast holds out....

Like this? https://nighttime-imaging.eu/docs/master/site/quickstart/uioverview/

okey doke. What happens if you send it home and after it goes way off, power off and then move it to the home position. At next power on when required would it return home or go to the same wrong position?

I assume you power it on in the "Home" position and you don't manually move its axes at any time? I also assume plate solving etc works ok?

Nicely done!

Primary and background may be the text boxes you're speaking of, looking at my colours anyway....

Button foreground and button background is one of the text settings. I'll check mine to see what else there is.