Jiggy 67

Nice sketch

Welcome Ed, sounds like you have a wealth of experience to pass on! Enjoy the forum

I’m not familiar with the instructions you refer to, does it just say point the mount North? If that’s the case, your PA will be miles out and as others have said, the altitude scale is rubbish, on my EQ6 R Pro, when PA is good, this scale is way off what my published latitude is. I’d say your issue is purely polar alignment. You would benefit massively from fitting a polar scope if the mount allows it

Thanks Doug, that’s a nice little website!

Probably worth a punt at that price if they fit your equipment, given that others generally need a controller as well. Appear to have good reviews

I use a Telegismos 365 and left my mount and scope out all last winter in all weathers. I haven't noticed any ill effects. Just cover it and in the morning if dry, remove the cover to air out. I also use ACF50 to protect all metal parts. Give it a good layer of the stuff and it will protect for months. This means I can be set up to go in 15 minutes as there is no PA (just a quick check and tweak once in a while) and no star alignment as I just start from Park position. People do worry about their equipment and I understand that but I would rather be out observing rather than not bothering because it's too much grief/intermittant cloud/extensive setup time and too heavy to carry out, which stops a lot of people. Personaly I'd rather use the equipment than keep it shiny and new in the house

Thanks mate, next Martian polar caps at Galloway 😀

Yep, that makes sense, being a newt and the wrong way up and around........Thanks @CraigT82 You've made my day!!

At 00.15hrs this morning (09/08/2020) I had a good look at Jupiter. Using the Morpheus 12.5mm (X80 Mag) I had a really nice view of a really bright Jupiter showing faint wisps of banding and the 4 Galilean moons. I then upped the anti and fitted the 4.5mm ep (X222 Mag). I was impressed to see that all 4 moons were still in the fov, although at the very edges. I had also fitted a Baader Contrast Booster filter and the bands of the planet did appear to be more defined. I also noted in the Northwest of the planet (as you are looking at it) approx 2/3rds up the face of the planet, a very faint but discernible bulge in one of the bands, big enough to be obvious. Now, I've never seen the GRS before, despite viewing Jupiter on numerous occasions, I guess, I've never had an eyepiece that offers enough contrast to do so (the Morpheus are new) so I have no knowledge to refer to. I've tried googling GRS transit times today but can't seem to find an answer for this morning. It may not have been the GRS at all.......but could it have been at that time and date???

If you were out walking in the wilderness with a map, you would need to orientate yourself with the map, the map would be useless unless you fitted it to the ground you’re walking in. A GoTo is no different, it has the map but needs to be orientated to sky to be able to use the map.

@acr_astro ........Words escape me!!!.....

I use the setting circles for one purpose and one purpose only.....to set and save the perfect home position. The age of apps and other digital means has left them redundant for any other purpose

I wouldn’t say that it suffers too much from condensation, it is open at the bottom but yes it can happen. I work on the premise that this equipment is designed to be used outside as much as possible and not for sitting in the house which I know is what it would be doing if I had to drag it in and out all the time

I have the same mount and I agree it is a heavy cumbersome beast, I genuinely believe that this is not a mount to be lugging in and out of the house for every session, it simply isn’t practical . As a result I left my mount and scope out all last winter under a Telegizmos 365 cover. I have not suffered any ill effects.....yet, I remove the cover as often as possible to air but the tripod means it’s open at the bottom anyway for ventilation. I also spray a good anti corrosion protective over the mount. I can be observing in 15 minutes, no PA or star alignment as the mount hasn’t moved and I just start from park position

Looks like your dad really knew what he was doing. Regarding the EQ6 R Pro mount, I’m sure your dad kept the manual but just in case he didn’t or you don’t have it, here’s a link to it. Give it a read and it will get you going in the right direction. Obviously you will still have questions, just ask http://skywatcher.com/download/manual/goto-mounts/ And the manual for the Synscan hand controller http://skywatcher.com/download/manual/synscan-hand-control-and-synscan-app/

I use this function during daytime setup. I find it really useful. It doesn’t get it bang on but pretty close so all I need to do when I get out in the dark is tweek it through the polar scope because it’s already close

Don’t really understand what you mean, are you saying the polar scope illumination is too bright??.....It’s fine in mine, just reduce it via the utilities menu in the handset

Yep, I found exactly the same but the the extension ring increases the eye relief, like you it’s solved the problem

Great report Baz.....what was the overall impression of the Morpheus ?

If you have mobility problems another option to consider is leaving your mount and scope setup outside. This results in no lifting in and out of the house and quick set up times. You will only need to polar align once on the first occasion and occasionally check over the following months. Synscan can save all your data from your last session so you can just start with no star alignment necessary The only condition is that your location is secure and you purchase a good cover, something like the Telegizmos 365.

Sorry, repeat post 🤥🤥

The EQ5 will be great for your scope, the GoTo is good and it will track well for AP. However if you can afford it, you may want to consider the HEQ5 just to future proof yourself. If you decide to upgrade to a heavier scope in the future the EQ5 will not cut it, you’ll be saving money in the long run

What!!!!!!.......£17 postage!!!!???!!

Nice job!! Looks like a labour of love