8kids Posted April 11, 2012 Share Posted April 11, 2012 What would be the best filter for viewing the moon, so I don't burn my eyeballs out. Any brand better than others, while your here what about other filters for viewing planets grey blobs and the like.Garyexplorer 300pds Link to comment Share on other sites More sharing options...
pajr777 Posted April 11, 2012 Share Posted April 11, 2012 I like the Baader Neodymium - cuts light pollution and takes the edge of lunar light. But it's not as good at cutting intensity as a 'true' neutral density filter. Having said that, I just allow my eye to adapt to the lunar brightness, after 30 seconds it doesn't dazzle anymore. Link to comment Share on other sites More sharing options...
michael.h.f.wilkinson Posted April 11, 2012 Share Posted April 11, 2012 I have an Orion moon filter, which I like, simply because it cuts down on the "one-sided blindness" you get from looking at the moon through the scope with one eye. For planets I tend not to use filters, for emission nebulae a UHC filter works for me. Link to comment Share on other sites More sharing options...
muttley Posted April 11, 2012 Share Posted April 11, 2012 Not sure how relevant this is, but my Skywatcher 150P allows you to leave the main cover on, and just unscrew a small cap. This reduces the aperture significantly, allowing you to view the moon comfortably without a filter. As a newbie, I don't know if this is a standard feature on most scopes, but it wasn't mentioned in the instructions - I found it by accident.Simon Link to comment Share on other sites More sharing options...
michael.h.f.wilkinson Posted April 11, 2012 Share Posted April 11, 2012 Not sure how relevant this is, but my Skywatcher 150P allows you to leave the main cover on, and just unscrew a small cap. This reduces the aperture significantly, allowing you to view the moon comfortably without a filter. As a newbie, I don't know if this is a standard feature on most scopes, but it wasn't mentioned in the instructions - I found it by accident.SimonUsing a small aperture also reduces resolution dramatically. The feature is sometimes used for solar observation, although I much prefer full aperture solar filters. Link to comment Share on other sites More sharing options...
nightfisher Posted April 11, 2012 Share Posted April 11, 2012 I have tried a few moon filters,. and by far the best to date for me is a neutral density 0.96, they take the glare away but keep, or improve detail Link to comment Share on other sites More sharing options...
jimmyjamjoejoe Posted April 11, 2012 Share Posted April 11, 2012 Sunglasses Link to comment Share on other sites More sharing options...
Tribal-Wolf Posted April 11, 2012 Share Posted April 11, 2012 I have a moon filter that came with a scope, a ND 0.96 and a neodynium and I don't use any for the moon Link to comment Share on other sites More sharing options...
sologuitarist61 Posted April 11, 2012 Share Posted April 11, 2012 I have a moon filter that came with a scope, a ND 0.96 and a neodynium and I don't use any for the moonHey Chris - what is the Neodynium filter like (OK I know it is small and round!!). Worth getting do you think? Is yours the Baader version?In answer to the main question, I use both a moon filter and a ND depending on how full the moon is - the moon filter when it is a crescent and then the ND as more comes into view. Link to comment Share on other sites More sharing options...
Tribal-Wolf Posted April 11, 2012 Share Posted April 11, 2012 Well in fairness I only used it for the first time last night but I was very impressed. It worked great against light pollution and help with contrast on a few things, I didn't say out that long though because I wasn't very well. To some it up, I'm glad I bought it. Link to comment Share on other sites More sharing options...
sologuitarist61 Posted April 11, 2012 Share Posted April 11, 2012 Excelleny - thanks for that - seen one going cheap!! Link to comment Share on other sites More sharing options...
rwilkey Posted April 11, 2012 Share Posted April 11, 2012 The Baader Neodynium Filter is very good, but for a neutral density filter the ND96 (0.9) is the best fixed density filter, otherwise polarizing filters, which are adjustable, are also very useful. Link to comment Share on other sites More sharing options...
8kids Posted April 11, 2012 Author Share Posted April 11, 2012 Thanks for all the replies, I think I'll try a baader neodymium filter, "seeing" it may have other benefits.Gary. Link to comment Share on other sites More sharing options...
Celtic Deacon Posted April 11, 2012 Share Posted April 11, 2012 I got this one First Light Optics - Baader Neutral Density Moon filters a few weeks ago but only been able to use it once. The difference is huge in that your eyeball doesn't go mad after viewing moon for a few minutes. Link to comment Share on other sites More sharing options...
Marki Posted April 11, 2012 Share Posted April 11, 2012 Might try one of those myself Deacon. Be interesting to compare it with the Neodymium I generally use. Actually, I tend to go for the moon last in a session - that way it doesn't matter so much if its a bit bright and hurting my nightvision. Link to comment Share on other sites More sharing options...
Lowenbrau Posted June 14, 2012 Share Posted June 14, 2012 I have GSO polarizing filter(s). It's great, plus I get another eyepiece tube which makes using other filters on various magnification useful. Adds only an inch of focus travel unlike other similar products.Anyhow I've chosen it over ND as of variability, on 4% transmittance details on planets are reduced, so I bring it to some 10%. I see no uniformity or vignetting with it. Also, it's much better for daytime use than ND.Did not try it on my new 16" and on very high powers though, at 300x + ND might be better but I don't know... Link to comment Share on other sites More sharing options...
knobby Posted June 14, 2012 Share Posted June 14, 2012 Not sure how relevant this is, but my Skywatcher 150P allows you to leave the main cover on, and just unscrew a small cap. This reduces the aperture significantly, allowing you to view the moon comfortably without a filter. As a newbie, I don't know if this is a standard feature on most scopes, but it wasn't mentioned in the instructions - I found it by accident.SimonI do this for the moon... works a treat and costs nothing! Link to comment Share on other sites More sharing options...
sanmatt Posted June 14, 2012 Share Posted June 14, 2012 What would be the best filter for viewing the moon, so I don't burn my eyeballs out. Any brand better than others, while your here what about other filters for viewing planets grey blobs and the like.Garyexplorer 300pdsI have a cheapy £5 moon filter jobby, it works a treat. It cuts out a lot of glare and I can view for ages Link to comment Share on other sites More sharing options...
michael.h.f.wilkinson Posted June 15, 2012 Share Posted June 15, 2012 I did have one "moon filter" that came with the Konus 114mm F=500 scope (now rebuilt as kiddies miniDob). It was a horrible cheap plastic thingy with a distinct green cast. It was like looking through ancient stained glass. Yes, it did cut glare, but, unfortunately, it also cut most of the interesting detail. Link to comment Share on other sites More sharing options...
8kids Posted June 15, 2012 Author Share Posted June 15, 2012 In the end I picked up a used 2" variable polarizing moon filter. I've only used it a couple of times but it does work very well. Link to comment Share on other sites More sharing options...
Mikejh Posted June 15, 2012 Share Posted June 15, 2012 I agree with the comment about experimenting with a reduction of aperture to see if that gives the desired effect for you. Link to comment Share on other sites More sharing options...
Brian Nordstrom Posted June 15, 2012 Share Posted June 15, 2012 Hi , I have the Baader moon filter as well and its very , very good . It takes the edge off without loss of natural colour and sharpness . Before I got it viewing an even 10 day old moon was to bright in my 127 triplet APO , yes the old 'blind in one eye trick' it aint much fun , kinda wanys to make me want to walk in circles ,, ha ha ha .Brian. Link to comment Share on other sites More sharing options...
Lowenbrau Posted June 15, 2012 Share Posted June 15, 2012 I did have one "moon filter" that came with the Konus 114mm F=500 scope (now rebuilt as kiddies miniDob). It was a horrible cheap plastic thingy with a distinct green cast. It was like looking through ancient stained glass. Yes, it did cut glare, but, unfortunately, it also cut most of the interesting detail.Sounds familiar However, try to pair it with some higher power when viewing Mars for great views on its caps and also enhancing details on Jupiter and Saturn Red and yellow are the best for those still. Link to comment Share on other sites More sharing options...
michael.h.f.wilkinson Posted June 15, 2012 Share Posted June 15, 2012 Sounds familiar However, try to pair it with some higher power when viewing Mars for great views on its caps and also enhancing details on Jupiter and Saturn Red and yellow are the best for those still.I prefer to look at Mars and Jupiter without filters, and this piece unspeakable plant-nutrition (there, I didn't say it ) is certainly not going to help. A proper green filter might assist, but not this. Link to comment Share on other sites More sharing options...
epeddy1 Posted June 16, 2012 Share Posted June 16, 2012 I like blue and purple on Jupiter. Yellow works good as a subsParus majorue moon filter. Edit: (Not sure why "s u b s t I t u t e" is getting autocorrected to that nonsense, lol). Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.