-
Posts
2,843 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Events
Blogs
Everything posted by Stuart1971
-
16m...you mean 16 minutes,...or seconds, as if 16 mins I would have thought the stars would be much more and brighter.... If you take say an exposure every minute for 1.5 hours and then say 20 dark frames of the same exposure length and then stacks the light and the darks together you would get something like this.... I did this with a canon 1000D unmodded camera on a tripod...
-
Yes deffo hot pixels, and very common on an uncooled camera, but as has been said, dark frames will remover no problem...👍🏼
-
yes it’s an apex I made as shown in one of the pictures, to the exact shape.. There is not at the moment, but it’s rare for the rain to move up hill over 5”...unless the wind was super strong, but we rarely get wind from that direction, and that side of the roof will be clamped down with clamps inside, so the two panels will be tight together with rubber against rubber....so I’m hoping all will be good....but I have an idea if there is an issue....👍🏼👍🏼
-
And a short video, but will post one with full opening when I get retainers fitted on the roof... 0DBF65DC-36CA-49FE-98B0-623B660A95BA.MOV
-
Pretty much got it finished now, roof panels rubbered up, and apex made up and fitted to the west facing roof panel, the barge boards are fixed to the shed rather than the roof panels, but the roof still overhangs by 3’ all round and has drip rails on the undersides, the hinges are superb and really heavy duty stainless steel 4” fire door hinges
-
Door fitted and the 2 opening roof panels made up today, the other side of the panels is smooth, ready for the EDPM rubber roof membrane. Also today coated the whole shed with two coats of an oil based preservative, which soaked into the wood really well, and was able to use a sprayer so made light work of it... but my back gave up so had to pack up early....☹️
-
Well made some good progress today, shed up and my outside sockets re positioned on the side as they would have been stuck behind...went up really well...👍🏼 The roof has to be made now, in two halves, and then two full length 4” x 2” batons down each side to support the fire door hinges which run on bearings, have to be fitted, then the EDPM roof fitted to each half...so some work to do yet....
-
-
Well you would be surprised, and the fact you mentioned all your kit and a Baader filter, but failed to mention the white light filter....made me wonder....👍🏼
-
And why was it so funny, you mentioned just the one filter, which is extremely dangerous...?
-
Just that one filter.....or a white light filter too, I do hope you are not just using the Baader filter....😮😮😮😮
-
OACapture will not control certain cameras on RPI version
Stuart1971 replied to Stuart1971's topic in Discussions - Software
Why would using Sudo potentially mess anything up, I use it all the time with all my commands, as if I don’t, somethings things won’t work.. am I missing something...? -
OACapture will not control certain cameras on RPI version
Stuart1971 replied to Stuart1971's topic in Discussions - Software
Would “sudo oacapture” show more..?. -
Astroberry server default password
Stuart1971 replied to Dazzyt66's topic in Getting Started Equipment Help and Advice
I thought that was sorted a long time ago on Astroberry....? -
Astroberry server default password
Stuart1971 replied to Dazzyt66's topic in Getting Started Equipment Help and Advice
Can I ask, why do you need to change it....sometimes this can issues, so don’t do it unless you really need to....I changed mine once and had a nightmare afterwards....but then again that was me, and Linux and me don’t seem to mix....👍🏼 -
OACapture will not control certain cameras on RPI version
Stuart1971 replied to Stuart1971's topic in Discussions - Software
What info from this date...?? There is nothing asked for...!! 🤔 -
OACapture will not control certain cameras on RPI version
Stuart1971 replied to Stuart1971's topic in Discussions - Software
I started this thread on December 29th last year, and I still can’t use my QHY5 or an Altair Astro camera with OAcapture on my raspberry PI...so I assume this is not going to happen anytime soon... ☹️ -
Astroberry remote operation setup
Stuart1971 replied to HyperBiotec's topic in Getting Started Equipment Help and Advice
Cant you connect both your mount and your Raspberry PI to your home network...? -
This is great to know as I have just bought the Geoptik 164mm version, so can I ask where do you have the dimmer set...as I found it seems to go from very dim, and then slowly gets brighter, then suddenly jumps to the brightest, it’s not the smoothest of dimmers, seems not to have much adjustment at the bright end, or is it just mine...?.
-
I bought a round one from Aliexpress with the 12v inverter for £22 posted...worth a look...👍🏼
-
AFAIK, it works fine with either...👍🏼
- 1 reply
-
- 1
-
You can’t tighten the gears so there is no backlash, all bears need some backlash to work, you have to find the balance, also you have to,take into account the colder temps at night this will cause binding if the gears are too tight, and yours obviously are...maybe you should have posted this on the thread you already started about the noises your mount makes...as we are providing info on there for you.....🤔🤔
-
First attempts at lunar photography
Stuart1971 replied to StuartT's topic in Getting Started With Imaging
So, if you are using a scope and imaging already, what’s with your other thread on using the LX90 vis a computer...?? I am confused...