Jump to content

Banner.jpg.b83b14cd4142fe10848741bb2a14c66b.jpg

tomato

Members
  • Posts

    5,055
  • Joined

  • Last visited

  • Days Won

    8

Everything posted by tomato

  1. That's a good result under a full moon, as you point out, M101 is a challenging subject if you are not under dark, moonless skies.
  2. Thanks for the reply. The subs from the OAG scope were fine, no trailing, so it must be differential flexture. I’ll tighten everything up before the next outing, see if that fixes it.
  3. This is M51 imaged over 4 nights in April, the last night capturing Ha under a 85% illuminated moon. Total integration 7.6 hrs. Dual Esprit 150/ASI 178/Mesu 200 rig, binned 2x2. L 89 x 3 min R 13 x 3 min G 13 x 3 min B 13 x 3 min Ha(7nm) 12 x 6 min Calibrated and stacked in APP, processed in Startools and APP.
  4. Amazing image Peter. It reminds me of a terrestrial photo of Mt Everest or the Matterhorn.
  5. The recent welcome run of clear nights has allowed me to note a strange phenomenon on my dual Esprit 150 rig. I have been imaging M51 which is pretty much overhead from my location and on three occasions around midnight I have observed trailing on the non guided scope for about 3x3 min subs which then disappears. I should note the guiding has been steady and constant on all 3 nights at 0.4” total RMS. Also it is definitely a trailing issue rather than a change in focus, which would perhaps make more sense (except the motorised focusers are backlash free). Flexing between the scopes can and does occur on the rig but usually when they are near to a horizontal orientation, why would it occur when they are near vertical? Maybe slippage in the tube rings if not perfectly vertical would manifest itself as trailed stars?
  6. Perhaps it’s not fair to comment, given I have never owned or even looked through a Tak, but all I can say that is when I looked at putting together a dual 6” APO rig for imaging I went with SW Esprit 150s based on a price/performance assessment from existing owners’ experiences posted here on SGL. Looking on FLO I think the Tak equivalent is the TOA-150B, for the price of one OTA I have dual scopes with FFs, tube rings etc with a few £k left over, and that is at current post COVID prices...
  7. I’m no lunar imager, but that looks like a really nice shot to me, l’m sure you will be impressed with 314’s capabilities once you can image some DSOs.
  8. Great images and very informative notes, shows you don’t need to have a close up rig to enjoy galaxy season.
  9. IMHO I agree a level playing field is going to be very tricky on this one, galaxy imaging benefits from pristine dark skies, and we haven't all got those. But hey, it's only for fun, right?😉
  10. Nice one! You should give the 3C 273 jet a go, I tried and think I captured it, just.
  11. Well, this is an instance where my experience has a different perspective. I am currently imaging at 1050mm FL at 0.94 arcsec per pixel. I monitor my subs through NINA and sometimes (rarely) I can take 20+ 3 min subs with the HFR values staying steady, but other times it can drop off straight away, and gets worse with every sub, even though the OAG performance is steady. Visually the subs don't look much different to my eye but they are firmly at the bottom of the list after any star analysis in APP. Focus stability on my rig does depend on orientation, elevation on the sky and temperature, stability improves after midnight when presumably everything has thermally settled down. I have a dome so the kit is permanently set up but this time of year I can see daytime temperatures of 30 degress inside so it definitely isn't a constant temperature environment. It is worth noting that my rig is both big and heavy, as this I think is a contributing factor to focus stability. This isn't a big deal for me as I use the autofocus routine in NINA, but putting a Bahtinov mask on and off every 5 subs would get tedious.
  12. I’ll watch this thread with interest as I have the same issue, although I image galaxies at 0.94 arcsec per pixel, which doesn’t make for tight stars. Still a very good Needle BTW.
  13. Thanks Lee, Yes, there have been a few late nights on the trot lately, but you won’t hear me complaining about the lack of sleep. The clouds will no doubt return soon enough. Steve
  14. April is again proving to be a productive month, it's nice when the clear nights coincide with the season for a galaxy fan like me. Some of these have been posted in the imaging challenge thread, as far as I know it's ok to post them again here, apologies if not and Mods please remove if I have infringed the rules. All taken with the Esprit 150/ASI 178 dual rig, binned 2x2, all calibrated and stacked in APP, all processed in Startools, APP and GIMP. Thanks for looking. NGC3169 & NGC 3166, 6.6 hrs total integration , two interacting galaxies in Sextans. 7.8 hrs on Arp 84, "The Heron" two interacting galaxies NGC 5395 and 5394 in Canes Venatici. This is 7.8 hrs on NGC 3938 in Ursa Major, no popular name as far as I can find out, but "Another Little Pinwheel Galaxy" would be quite apt, I reckon. And I wasn't planning to image any of the big hitters this season but after seeing so many fine examples of M51 on this sub forum, I couldn't resist. This is 3.6 hrs integration.
  15. 49 hours, that's longer then my working week used to be! A superb image.
  16. Great wide field image, lots of other galaxies visible also.👍
  17. I am feeling like I am hogging this thread a bit but I know my galaxy imaging window is closing fast now for this season. So this is Arp 84, "The Heron" two interacting galaxies NGC 5395 and 5394 in Canes Venatici. It is the same imaging rig, dual Esprit 150/ASI 178 cameras retro fitted fitted with Peltier coolers. 7.8 hrs total integration all binned 2x2 so imaging at 0.94 arcsec/pixel. Captured over two effectively moonless nights, elevation >60 degrees, guiding at 0.5-0.6 total RMS. L 78 x 3 min RGB 26 x 3 min each Calibrated and stacked in APP, processed in APP, AP and GIMP. I have rotated the image clockwise 90 degrees from the capture orientation otherwise the Heron would be flat on his back.
  18. Assuming you have the camera installed at the correct backfocus distance for your RC (or somewhere close) and the scope is pointing centrally at a bright star, set Artemis to loop at half second intervals and then move your focuser in and out. It’s not quite live view, but you will get feedback quick enough to make progress. Please don’t give up on the 314, it was my first ‘proper’ Astro camera, it is what got me hooked on AP.
  19. This is 3 hrs of Lum on the Esprit 150/ASI 178 rig, binned 2x2 so imaging at 0.94 arcsec/pixel. It is not an ideal subject, only about 30 degrees above the horizon and right above the neighbour's roof, guiding wasn't exactly brilliant. The images have been stretched to within an inch of their lives to try and establish if anything was visible. The first image is the whole of the FOV, with 3C 273 in the centre. A pixel wide protrusion is visible on the stretched image in the same orientation as the jet, see stretched crop and library image. Is it the jet? Well, it is in the right place and the right size, and it is very, very faint, but then there are other jet like artefacts(?) visible in the image so maybe I'm being a little optimistic. However, if it is the jet then it is a testament to how far AP equipment has come. OK, I’m using a 6” refractor, but the camera costs £322 from FLO. AP is a strange hobby, this is the poorest quality DSO image I have taken this season, yet it's the one I'm most excited about. Thanks for looking.
  20. Nice one, only looking on my phone but some of the brighter HST objects are visible. This is another project I want to do but will probably miss this until next year, Astro darkness rapidly diminishing and I guess it would be best for the region to have a decent elevation on the sky.
  21. That's a cracking image, one of the best I have seen on SGL of this FOV, and only 5.5 hrs integration, you have made the most of every minute. 👍
  22. If you are combining the channels in APP, you can adjust the individual channel sliders in the combine RGB tool on the left hand side until you get the desired colour balance then save this file. I would agree with @tooth_dr, your original looks to have a pink hue overall. Having said that you have some great detail, and the outer arms of M106 are very well defined, something I struggle to achieve. Great framing also.👍
  23. Those incredibly luminous globular clusters are also in there.👍
  24. Planetary processing, that might work. I do have a nice candidate for the jet on the one hour stack, it just happens to be in the wrong place...
  25. Here is my next effort, 6.6 hrs on NGC 3169 & NGC 3166, two interacting galaxies in Sextans. Captured over two nights using the dual Esprit 150/ASI 178 rig, the cameras are the uncooled type, but have been retrofitted with Peltier coolers and fans to keep them at a constant 3 deg C, to hopefully achieve more consistent calibration. Capture details: L 66 x 3 min R 26 x 3 min G 15 x 3 min B 25 x 3 min All binned 2 x 2 so imaging at 0.94 arcsec/pixel OAG on a Mesu Mk 1 mount, running at 0.65" total RMS. Calibrated and stacked in APP, processed in Startools, AP and GIMP.
×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue. By using this site, you agree to our Terms of Use.