-
Posts
4,188 -
Joined
-
Last visited
-
Days Won
4
Content Type
Profiles
Forums
Gallery
Events
Blogs
Everything posted by CraigT82
-
Really nice capture Geof, nicely processed
-
What a unique mount, Looks like it is driven via long belts around the two large round plates? What is the need for the tall ‘rats cage’ pillar? That looks like it might be a weak spot.
-
Lovely image. Hellas basin stands out like a sore thumb, don’t remember it being that colour last time. Maybe the recent storm deposited a load of fresh sand there.
-
Nice shot, lots of detail and definitely got potential. Seems like focus might have been off a tad? Maybe just seeing.
-
Nice! Your C8 is kicking backside
-
Nice shot, there’s a few ways to deal with the edge rind. Martin Lewis has done some fairly comprehensive work on what it is and how to get rid of it: https://skyinspector.co.uk/mars-edge-artefact/
-
Jupiter with a bit of GRS (21th October 2022)
CraigT82 replied to Kon's topic in Imaging - Planetary
Nice image there m, shows even in poor conditions it’s worth going out. I’d be tempted to boost the saturation little to give it some zip -
Planetary imaging - what do I need to know.....?
CraigT82 replied to fwm891's topic in Imaging - Discussion
Thanks! I’m not going to pretend I understood much of that but it’s given me some direction for further reading. Thanks for taking the time to respond 😊 I have looked at the planet size in the image and back calculated to FR and it came out to F/17, so I thought I was actually oversampled with my 2.9um pixels. -
Planetary imaging - what do I need to know.....?
CraigT82 replied to fwm891's topic in Imaging - Discussion
Thanks Vlaiv, super informative as ever. The individual stacked tiffs were all sharpened with wavelets and deconvolution before going into WJ…. And I guessed at the kernel size during the deconvolution step exactly like you said. Any ideas how I could properly restore all frequencies?! Sampling looks ok though does it? I’m not sure. -
Really nice result Neil, lovely detail
-
Efforts from Oct 15. 70% Waning. C11 and 140 refractor.
CraigT82 replied to WestCoastCannuck's topic in Imaging - Lunar
Very nice Mike, tough to beat sheer aperture on the moon -
Planetary imaging - what do I need to know.....?
CraigT82 replied to fwm891's topic in Imaging - Discussion
Had a go using the normal FFT function and got this (loaded up my winjupos derotation output OSC with no further post processing/sharpening). Edge of circle is 2.06 pix per cycle. Does this look right @vlaiv. Seems to be a large concentration of low frequencies If I try the same thing on the fully post processed image (no rescaling occured) I get this weirdness -
Planetary imaging - what do I need to know.....?
CraigT82 replied to fwm891's topic in Imaging - Discussion
Just having a go with the FFTJ plugin but I'm doing something wrong I think... what settings do you use in this box? -
A fine image from a 6” mak. Cracking scopes they are.
-
Why do you measure the disc diagonally like that? I’ve always done it across the equator as I assumed it was equatorial diameter that was given for Jupiter’s apparent size in arc seconds but I may be wrong. Jupiter is quite strongly oblate so it may make a difference?
-
The closer the object you’re trying to view the further out the focuser will be when it is focused. So you just need to figure out the minimum distance to the object that you will be able to focus on with your existing focuser travel. There is a calculation on here somewhere that @vlaiv posted not long ago. With my old 200p f/6 I could just about focus on a fence which was about 60m away but I had to partially pull out the adapter and eyepiece to get it
-
Time for some barlow shopping, which one? - Planetary/Lunar
CraigT82 replied to ONIKKINEN's topic in Imaging - Discussion
I used the APM 2.7x barlow extensively and loved it, performed well in my variety of newts but I admit I never used it at anything less than 2.7x, usually a touch more. You can buy just the lens cell rather than the whole thing if you don’t need the nosepiece and body (which are well made but heavy). I think owes it’s coma correcting abilities to it’s long focal length of 62.9mm (I read somewhere than any long FL doublet barlow will correct coma?) Alternative if you want wide field lunar is to capture mosaics, use the small centre portion where image is sharpest and capture a few panes to stitch. The faster frame rates you get with the smaller RoI offset the extra time of shooting multiple panes (to some extent) -
Skywatcher Quattro 10 spring upgrade
CraigT82 replied to Craig a's topic in Discussions - Scopes / Whole setups
Have a look at the currently fitted springs and measure them you can. In particular if you can get a calliper on the wire to see what diameter the wire is that would be useful. Spring strength comes from the amount of metal in the springs, so if you can get new springs with either more fewer coils for a given length, or thicker wire then they will be stronger. You will likely want your new springs to match the overall diameter and length of the originals. If you can’t find ones that will work then buying one longer length of spring and cutting it down would work, but you’d need to dress the cut ends to make them flat.This is what I did with my 300p and I used a blowtorch, pliers and a file to do this. I bought 2mm diameter wire spring which is seriously strong. Edit: Made a mistake, reducing the number of coils increased the spring rate, not increasing -
Yeah I’m not sure there should be much difference optically between the Celestron and the Baader, maybe be there is, never had a Celestron Ultima. Probably need back to back testing to reveal if one is optically sharper than the other. I’d have thought the Baader would give you more than 2.25x when screwed into the ADC nose as the distance to the camera is then farther than if using it on the nose of the camera? Mine gives me 3.4x when on the nose of the ADC (measured off the captured image).
-
Jupiter has more reds/oranges/terracotta in it’s actual colour so you’d expect the red channel to be higher in the histogram than the other two. If you look at mono RGB captures of Jupiter the R is always brighter/lighter than the G or B. So balancing the overall image histogram so that all three channels are equal doesn’t really make sense to me. And who’s to say what the true colour of Jupiter is? Yeah there should be a way of doing it but colours will always be distorted, either by the personal tastes of who’s processing the image, or by other factors such as our atmosphere, telescope optics (eg looking through an eyepiece to get the true colour won’t work as your scope and EP will add their own colour cast and so will our atmosphere, often making things muddy). So what about space telescopes or probes, no atmosphere there so scientific imaging should reveal the true colour balance. Trouble is we very rarely see the truly unmanipulated colour images, we see the processed for the public versions that are almost always fiddled with and will contain the biases of whoever processed them. Take this official release Hubble image for example: look at these two Juno images which are presented side by side on the NASA website, both have different colour processing, I’d be tempted to say the top one is more realistic with the bottom one a colour boosted/adjusted version? Here is another one that shows the white clouds not actually white : What we really need is a Juno or Hubble image that is combined from mono RGB data that hasn’t had any normalisation or colour balancing. Then we would have a reference for what Jupiter really looks like. Perhaps someone who has done their own processing on public Juno/Hubble data could do?
-
Jupiter and mars from 2 nights with difficult seeing
CraigT82 replied to ONIKKINEN's topic in Imaging - Planetary
Nice work, not wasted night by any stretch. Have you tried without the paracorr? -
I know a couple of people who use these and are happy…. https://tms-astro.webnode.hu/eq-platform/ Based in Hungary so would have to account for fees/duties
-
I usually shoot 5k frames at a time which at 100 fps is just under a minute. There not really a time limit but as mentioned by Onikinnen the file sizes get huge quickly especially if capturing full sensor size
-
Very nice images, animation works well too you had some nice steady seeing