Alan White Posted July 4, 2023 Author Share Posted July 4, 2023 1 minute ago, Mike Q said: Thats a nice looking unit there. So it will be roll out instead of roll off Indeed it will Mike, makes the mounts and 10" so much closer and easier to shift, I am having knee and hip issues and this is part of making life more easy. Oh and Mrs W gets the 10" out of the House too, which is a positive move 👍 1 Link to comment Share on other sites More sharing options...
Alan White Posted July 4, 2023 Author Share Posted July 4, 2023 (edited) I have been asked why the Store is located as it is in a PM, which is a fair question to pose, thanks @Mike Q. The Shed / Store is central to the concrete and this allows both doors to open fully open as they are 2' roughly wide. The shed is 6' with about 1' walls each side of doors. I have had help getting the kit in for the picture and more room than I expected, which is good. Mind you my immediate thought was room for more kit!! Bad, Bad me. It is furthest back on the pad, which allows me to see the sky above my tree line, even with the Dob in use. Or so I worked out....time will tell if that is correct. Edited July 4, 2023 by Alan White 5 Link to comment Share on other sites More sharing options...
Guest Posted July 4, 2023 Share Posted July 4, 2023 2 hours ago, Alan White said: Well following the good advice given on shed types, the wooden store has just arrived and been put up. This is work in progress and will go Green in near future, but a notable step onwards. Electrics to run between Khazi and Store for lighting and a socket too. Before the Store And with the Store A nice solid job, very pleased with the quality from my local maker Falcon Sheds. Alan and I have had a off thread discussion going on about this and it is with his blessings i present "how the damn yank" would have done it. Over here in the States loosing space on a nice concrete pad just isnt an option, that falls into the oh hell no category. So, again with Alan's permission, i am presenting a couple different options that are probably more in line what I would have done. Plan A .... and the simplest. Remove sod equal to the depth of the shed and across the width of the slab. Add a wee barrier, some paver base, tamp it down.... (Why does this sound familiar?) and set the shed on it. No loss of concrete, less yard to mow. Its a win win. Plan B.... Remove those hedges on the left side of the slab and then do plan A. Ok nobody said this was going to be easy and yeah that is probably what I would do. Anyway this is not presented as criticism but as here are a couple more options that one might consider. Link to comment Share on other sites More sharing options...
Alan White Posted July 4, 2023 Author Share Posted July 4, 2023 (edited) I have to laugh at above as the original concrete area was far bigger and was part removed to make this pad area. The aim at the time was shielding from lights next door, it does that job fairly well. Edited July 4, 2023 by Alan White Link to comment Share on other sites More sharing options...
Guest Posted July 4, 2023 Share Posted July 4, 2023 You know now that you mention it.... I seem to remember the pad be larger. Link to comment Share on other sites More sharing options...
bosun21 Posted July 4, 2023 Share Posted July 4, 2023 A very nice little shed you got built there @Alan White. My thoughts are anything you can do to make your observing more comfortable and easier to set up is a huge bonus. Looking forward to its completion and your thoughts in its use. 1 Link to comment Share on other sites More sharing options...
Alan White Posted July 6, 2023 Author Share Posted July 6, 2023 (edited) Had a quick shuffle about of kit over my lunch stop today and pointed the LS40 at a cloudy sol. But made first use of 'The Store' and upgraded Observing Area. I also just ordered some more SWA, Glands etc to run power from the Khazi and allow for a socket and red and white lights (watch this space). Pleased to get to this point, especially how I am hobbling about at present. Edited July 6, 2023 by Alan White 6 Link to comment Share on other sites More sharing options...
Swoop1 Posted July 6, 2023 Share Posted July 6, 2023 I reckon that, with 4 tactically spaced eye bolts, 2 lengths of braded steel wire, an eyeleted tarpaulin and a handful of rings, you could put an easily retractable awning over that 1 Link to comment Share on other sites More sharing options...
Guest Posted July 6, 2023 Share Posted July 6, 2023 25 minutes ago, Swoop1 said: I reckon that, with 4 tactically spaced eye bolts, 2 lengths of braded steel wire, an eyeleted tarpaulin and a handful of rings, you could put an easily retractable awning over that Party patio? Link to comment Share on other sites More sharing options...
JeremyS Posted July 6, 2023 Share Posted July 6, 2023 9 minutes ago, Mike Q said: Party patio? I’ll bring the beer 3 Link to comment Share on other sites More sharing options...
Franklin Posted July 6, 2023 Share Posted July 6, 2023 1 hour ago, JeremyS said: I’ll bring the beer You shouldn't really be encouraging alcohol, that's how telescopes get dropped😊. 3 Link to comment Share on other sites More sharing options...
Guest Posted July 6, 2023 Share Posted July 6, 2023 2 hours ago, JeremyS said: I’ll bring the beer PARTY at Big Al's place everyone! Where's my passport Link to comment Share on other sites More sharing options...
Rusted Posted July 6, 2023 Share Posted July 6, 2023 2 hours ago, Franklin said: ...... that's how telescopes get dropped😊. Which brings up the subject of "jigsaw" rubber matting around the mount [over the concrete.] To make things bounce nicely. 3 Link to comment Share on other sites More sharing options...
Ags Posted July 6, 2023 Share Posted July 6, 2023 Nice to see the progress of the project. I am planning a similar build, but in my case I need the barrier about 3m high (I have upstairs neighbors who don't believe in curtains) so looking at a line of evergreen espalier trees. I don't imagine it will prove fully effective screening, but I guess somebody would object to a 3m high fence outside their kitchen window! Also looking at a small shed like you for storage although I would like to have a small fold-out table for my laptop when doing imaging. Also thinking about the the SkyWatcher wheelie-pier you have... how do you find maneuvering it in and out of the shed? Link to comment Share on other sites More sharing options...
Alan White Posted July 7, 2023 Author Share Posted July 7, 2023 10 hours ago, Ags said: Nice to see the progress of the project. I am planning a similar build, but in my case I need the barrier about 3m high (I have upstairs neighbors who don't believe in curtains) so looking at a line of evergreen espalier trees. I don't imagine it will prove fully effective screening, but I guess somebody would object to a 3m high fence outside their kitchen window! Also looking at a small shed like you for storage although I would like to have a small fold-out table for my laptop when doing imaging. Also thinking about the the SkyWatcher wheelie-pier you have... how do you find maneuvering it in and out of the shed? The pier is a Vixen one for the GP mount and has no wheels, its light aluminium construction. The reality is that its used as I need a second tripod, I prefer a tripod for stability. Wheels would be a pain as the shed floor is about 60mm above the concrete level and has a small lip in the doorway. On your build, make sure you discuss the trees with the neighbor if you can, things like that tend to set people going. A drop down shelf would be simple enough, if you had a shed purpose made, the builder could make that part of the design. I look forward to see where your own project goes, I am sure it will get tweaks just like my one has done over time. One thing to consider is security for whats in the store space, I have various bars and locks on order to add to my store, some is due in the post today, so a few more steps yet before the green fence and shed treatment comes out to match the rest. 1 Link to comment Share on other sites More sharing options...
Alan White Posted July 7, 2023 Author Share Posted July 7, 2023 16 hours ago, Swoop1 said: I reckon that, with 4 tactically spaced eye bolts, 2 lengths of braded steel wire, an eyeleted tarpaulin and a handful of rings, you could put an easily retractable awning over that Indeed I could, but only if I want to take up flying. We are in the Essex Alps 😉 and catch uphill breeze (understated) and anything that can get lift, does. The Store will be fixed down to the pad before Autumn to ensure that it is not a flying shed. I do like the overall cover idea, that will be at my next property when I downsize and retire, but not wishing my time on this fine blue orb away in anticipation and making things work for the now. 2 Link to comment Share on other sites More sharing options...
Guest Posted July 7, 2023 Share Posted July 7, 2023 2 hours ago, Alan White said: The pier is a Vixen one for the GP mount and has no wheels, its light aluminium construction. The reality is that its used as I need a second tripod, I prefer a tripod for stability. Wheels would be a pain as the shed floor is about 60mm above the concrete level and has a small lip in the doorway. On your build, make sure you discuss the trees with the neighbor if you can, things like that tend to set people going. A drop down shelf would be simple enough, if you had a shed purpose made, the builder could make that part of the design. I look forward to see where your own project goes, I am sure it will get tweaks just like my one has done over time. One thing to consider is security for whats in the store space, I have various bars and locks on order to add to my store, some is due in the post today, so a few more steps yet before the green fence and shed treatment comes out to match the rest. If you were handy a door threshold and modifying the doors to accommodate it would be easy. Then wheels wouldnt be a problem. Link to comment Share on other sites More sharing options...
Ags Posted July 7, 2023 Share Posted July 7, 2023 3 hours ago, Alan White said: On your build, make sure you discuss the trees with the neighbor if you can, things like that tend to set people going. The neighbours along that end of the garden are short-term airbnb tenants and the owners uncontactable, but the treetops will be well below their window line so I think all will be good. Besides, who could possibly object to an elegant line of espaliers? I don't imagine my shed floor will be level with the paving - I was planning on getting a wheelchair ramp or similar. 1 Link to comment Share on other sites More sharing options...
Alan White Posted July 9, 2023 Author Share Posted July 9, 2023 (edited) Power from Khazi to Store shed run this morning in SWA, just a double socket with USB outlets so far. Light/s inside yet to be sorted out, but one step at a time. And beefed up the doors for heavier lock and adjusted doors so no slight binding etc. Will also add an outside red light for when setting up and breaking down kit, should be so much easier than a torch. Edited July 9, 2023 by Alan White typos of course 5 Link to comment Share on other sites More sharing options...
Rusted Posted July 9, 2023 Share Posted July 9, 2023 Talking of increased security: Don't have the heads of screws holding hinges, latches or hasps accessible. An easy target for a rechargeable drill/screwdriver. I recommend coach bolts with domed heads. Nothing to grip nor attack with any normal tool. Make life as difficult as possible for the thief. Many padlock hasps are as strong as butter. Check your contents insurance covers "outhouses." Link to comment Share on other sites More sharing options...
Alan White Posted July 9, 2023 Author Share Posted July 9, 2023 2 hours ago, Rusted said: Talking of increased security: Don't have the heads of screws holding hinges, latches or hasps accessible. An easy target for a rechargeable drill/screwdriver. I recommend coach bolts with domed heads. Nothing to grip nor attack with any normal tool. Make life as difficult as possible for the thief. Many padlock hasps are as strong as butter. Check your contents insurance covers "outhouses." Thanks Rusted, that’s exactly what’s next and ordered for next week, a pile of coach bolts and bits. 1 Link to comment Share on other sites More sharing options...
NGC 1502 Posted July 10, 2023 Share Posted July 10, 2023 Hi Alan…….love the new shed…….just one comment……..there’s room for a much bigger Dob in there😁😁 Ed. 1 Link to comment Share on other sites More sharing options...
Alan White Posted July 10, 2023 Author Share Posted July 10, 2023 7 hours ago, NGC 1502 said: Hi Alan…….love the new shed…….just one comment……..there’s room for a much bigger Dob in there😁😁 Ed. Thanks, it does work well. Indeed there is Ed, perhaps a second one, well one day, it was my first thought as soon as the kit was moved out to its new home, oh look....room for more kit! 1 Link to comment Share on other sites More sharing options...
mikeDnight Posted July 10, 2023 Share Posted July 10, 2023 Be careful Alan. Just one more side to fill in on your observing area and you'll be looking to put a sliding roof on it. 1 1 Link to comment Share on other sites More sharing options...
Guest Posted July 10, 2023 Share Posted July 10, 2023 2 hours ago, Alan White said: Thanks, it does work well. Indeed there is Ed, perhaps a second one, well one day, it was my first thought as soon as the kit was moved out to its new home, oh look....room for more kit! FLO has a very nice 16 inch dob that would look really nice sitting there. That seems like a no brainer to me lol. Just looking out for your best interests. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now