-
Posts
6,301 -
Joined
-
Last visited
-
Days Won
6
Content Type
Profiles
Forums
Gallery
Events
Blogs
Everything posted by dweller25
-
Great job 👍
-
Mak 180 or C8/ C8 Edge for DSO and Moon
dweller25 replied to Marian M's topic in Getting Started Equipment Help and Advice
OK - forget about the 8” Newt then as they need more space 👍 it’s a tough call between a C8 , CC8 and Mak180. The SCT will be best on DSO’s as it has a true 8” aperture but contrast is not great, the Mak seems to gets consistently good reports for sharpness and contrast but it’s only 7”, the CC8 has been around for a couple of years now and has had variable reviews. Good luck with your decision…… -
Mak 180 or C8/ C8 Edge for DSO and Moon
dweller25 replied to Marian M's topic in Getting Started Equipment Help and Advice
That’s exactly what I do too John…. Heated room to unheated conservatory for a couple of hours then outside. The conservatory is around 5’C higher than outside so I find I still have to use active cooling. I am going to try putting the scope in the garage for a couple of hours late afternoon to see if that helps….. -
Mak 180 or C8/ C8 Edge for DSO and Moon
dweller25 replied to Marian M's topic in Getting Started Equipment Help and Advice
I have to store my scopes in my home, so they will always be warmer than outside temperatures, thus the CC I had still took a good 30 minutes to cool with a cooling fan blowing onto the primary. Where do you store your CC8 John ? -
Mak 180 or C8/ C8 Edge for DSO and Moon
dweller25 replied to Marian M's topic in Getting Started Equipment Help and Advice
Hello @Marian M and welcome to SGL 🙂 Mak 180, C8 or CC8……. Hmmmmm I would get the Mak180 and wrap it with a couple of layers of reflectix to reduce the thermal gradients inside the OTA. They have good contrast. But, the C8 has slightly higher resolution, slightly better light gathering and is lighter too. The C6, C8 and C9.25 I owned in the past did not have great contrast. For visual you do not need the Edge version. The CC8 is heavy and cannot be wrapped so you will have to wait for it to cool and it may have tube currents as it’s open fronted. My GSO CC was not operating at full aperture, I believe due to the secondary being too small - by design - to keep contrast good. In my opinion it is the most compromised design of all these three designs. I suspect a much cheaper 8” F/6 Newtonian will be just as good as any of the above scopes. -
It sounds like the little grub screw may have come loose on one or more of the cogs that mesh together. It’s a fairly easy job to slide them down the axle so they mesh correctly and then tighten the securing grub screw with an Allen key.
-
Can someone help me understand.
dweller25 replied to Username556's topic in Getting Started With Observing
Stellarium is a very good free night sky simulator. -
Hello @andyrawlins I have the same green Vixen GP which I use for visual only. I keep the scope weight down to around 6.5kg maximum for best results and use a counterweight big enough to allow good balance close to the EQ head rather than at the far end which can set up vibrations. I also had the same tripod as you but found it not stable enough so changed to a Berlebach UNI. 10kg of kit is possibly a bit too much for imaging. It s a very good mount used within it’s capabilities. Perhaps you can look for a bigger Vixen GPDX - that will take 10kgs and you can use your existing Starbook. Or consider a lighter more compact scope - I use a Mewlon 180 on mine and it is very stable at x400. Hope that helps.
-
You get some great deals buying second hand - most astronomers look after their kit so it can be a good option. I would not stress too much about immaculate optics as all scopes become less than perfect eventually. Newtonians can be easily cleaned and recollimated, SCT’s need accurate reassembly and collimation after cleaning. Refractors don’t need disassembly for cleaning so no need for recollimation. Remember that the bigger the scope the more thermal management will be needed and they will be more affected by seeing conditions. Apologies if you know all this 🙂 You have a good budget 👍 PS - I know it’s not an SCT but this 6” ED refractor is in stock 😈…… https://www.firstlightoptics.com/pro-series/sky-watcher-150ed-ds-pro-eq6-r-pro.html
-
Triple NB imaging rig with remote camera rotation using a turret system.
dweller25 replied to Gina's topic in DIY Astronomer
Awesome - as usual 🙂- 9 replies
-
- 1
-
- tripleimaging
- wf
-
(and 3 more)
Tagged with:
-
Prism or Mirror diagonal at f7.7?
dweller25 replied to Franklin's topic in Getting Started Equipment Help and Advice
I have tested a Baader BBHS prism and BBHS Mirror in an F/8 refractor, the prism had a slight edge in contrast to my eyes, possibly because it was slightly dimmer. -
Takahashi rack and pinion parts
dweller25 replied to Fedele's topic in Discussions - Scopes / Whole setups
the answer is simple. -
Alternative to reflectix
dweller25 replied to Trentend's topic in Discussions - Scopes / Whole setups
You should be able to just fit two layers without removing the dovetail. I found it essential to also cover as much of the rear as possible. -
Takahashi rack and pinion parts
dweller25 replied to Fedele's topic in Discussions - Scopes / Whole setups
😂 -
Takahashi rack and pinion parts
dweller25 replied to Fedele's topic in Discussions - Scopes / Whole setups
Are you concerned about them wearing out ? My FS128 is 23 years old and the rack and pinnion are fine. -
grab and go tabletop for planets
dweller25 replied to tripleped's topic in Discussions - Scopes / Whole setups
Yes 👍 -
QUOTATION of a FC100DL first 100 pz serie
dweller25 replied to Fedele's topic in Discussions - Scopes / Whole setups
It’s a nice scope @Fedele and hard to replace as not many were made. Would suggest around €2250 (£1900) as long as it has all the original Takahashi accessories and is in mint condition. -
grab and go tabletop for planets
dweller25 replied to tripleped's topic in Discussions - Scopes / Whole setups
Thoughts but not personal experience re the 90mm Mak……. I would buy a 130mm table top Dobsonian as it will cool quicker and has more resolution. -
@Stu Does the AZ100 have the multibase location nuts like the AZ75 ? I have a UNI28 but with a Vixen GP/EQ5 fitting. If not it would be a great if it could be changed…….
-
Thought I was on CN for a minute 😂
-
AE ( Luton) Ltd 4 1/2" F14 Refractor
dweller25 replied to Saganite's topic in Discussions - Scopes / Whole setups
Wow, excellent job, it looks great, well done 👍 -
Well, theres no harm in asking whilst it’s in development….. Apples and pears go well together 🙂 Sadly the AZ100 is too heavy for me 🙁
-
Not quite John - it would be nice to have the choice of slo-mo control on the lighter mount 👍
-
I have been waiting for a lightweight, quality alt-az mount for some time BUT in my opinion it needs SLO-MO controls for smooth high power observations - PLEASE 🙂
-
NEW Rowan AZ75 Alt-Azimuth Mount.
dweller25 replied to FLO's topic in Sponsor Announcements and Offers
Finally - a lightish high quality alt-az mount. I am very, very interested in this mount. Look forward to seeing how much it weighs….. BUT - In my opinion it needs slo-mo controls to make it ideal.