Astro Pixel Processor Q

[Astroscot2]

Hello,  ive downloaded the trial version of APP and im having problems viewing my images.

Any image I open or process seems to be shown a 1/4 of the vied image?  could be a setting im missing?

 

Thanks

Mark

[Craney]

Just as an initial guess, with no expertise at all........

Have you combined darks /flats / bias   at a different Bin x Bin to your light frames....??

Does it do this with all your data  or just this particular camera etc ??

Those vertical and horizontal lines look odd  ??   

Are the individual light frames all reasonable,  in quality and the position of the object ie...it's not jumping around.

I would try to return every setting back to 'normal'. or a non-operational setting as best you can..... there are so many variations and goodness knows what some of them do.

Just what is a Winsorian rejection of my MasterFlat !!!! 🤔

 

 

[Astroscot2]

Hello, I see the same view no matter what image I use be it dslr or my ccd camera, raw files or integrated, I've left all settings to default so not sure whats causing this? 

[wornish]

If you restart APP and load a single light image does it do the same?

[PeterCPC]

Looks like you have 4 files highlighted. Just highlight the integrated light file.

Peter

[Stuart1971]

2 minutes ago, PeterCPC said:

Looks like you have 4 files highlighted. Just highlight the integrated light file.

Peter

Yes the above is correct, just highlight one image at a time... 👍

[jarralad58]

agree with peter,just click the last one.this will be the one you work on.every time you save after you have done work in it,it will go to the bottom of the list.then you work on that one,just repeat till your happy.then go to right hand side panel and do some processing in there.some good tuturials on you tube.

[Astroscot2]

Hello.

 

Thanks for your replies, On the image list above ive only selected the final integrated image.

[Astroscot2]

3 hours ago, wornish said:

If you restart APP and load a single light image does it do the same?

Hello,  yes even with a single image, DSLR / CCD image,  still shows the same view.. very odd

[Stuart1971]

31 minutes ago, Astroscot2 said:

Hello.

 

Thanks for your replies, On the image list above ive only selected the final integrated image.

You have 4 files highlighted in the box shown in the image above...

[wornish]

What operating system are you using  Windows 10, Windows(other version),  something else?

[Astroscot2]

I've sussed it changed the open gl3 to CPU and that worked, thanks for the suggestions. 

Mark