Astroscot2 Posted July 17, 2019 Share Posted July 17, 2019 Im looking to replace the fixing bolt on the head an old EQ3 tripod with a similar 3/8 bolt. Ideally im looking for a type of thumb screw that can be easily adjusted but can not locate anything online with the usual suspects, screwfix ect, Ive gone through the sticky thread of bolt / screw suppliers without success, does anyone have any suggestions or have such item they would sell? This style would be good however anything that I could easily tighten by hand would be ideal. Mark Link to comment Share on other sites More sharing options...
PaulR1 Posted July 17, 2019 Share Posted July 17, 2019 I had this problem too , I took a wander up to our local hardware store they had loads. this might be your best bet . I can't get them in the DIY stores here in the Netherlands ( its all metric) and I think this might be the same in places like B&Q The older family run kind of hardware store is the place to go This kind of place Link to comment Share on other sites More sharing options...
Gina Posted July 17, 2019 Share Posted July 17, 2019 Very few of those left these days unfortunately! Link to comment Share on other sites More sharing options...
Dr_Ju_ju Posted July 17, 2019 Share Posted July 17, 2019 Looked on eBay ?? https://www.ebay.co.uk/sch/i.html?_from=R40&_sacat=0&_nkw=3%2F8+bolt&_ipg=200&rt=nc Link to comment Share on other sites More sharing options...
Oldfort Posted July 17, 2019 Share Posted July 17, 2019 WDS do these. May not be long enough. http://www.wdsltd.co.uk/product/3201/hand-screw-imperial-unc-wds-102/ Link to comment Share on other sites More sharing options...
pmlogg Posted July 20, 2019 Share Posted July 20, 2019 I tend to use stainless for everything astronomy and could never find a UK source. However Losmandy sell press-on plastic T handles for 3/8" UNC socket-head bolts. From their price list: T HANDLE 3/8 PLASTIC PRESS ON TEE HANDLE FOR 3/8 BOLTS $1.00 http://www.losmandy.com/pricelist.html That's what I use. I suggest buying more than you need as I certainly broke one in the process of pressing it on to the bolt head. If the postage seems too high you could perhaps email to see if they can send at a lower price via normal US Post Office in a jiffy bag rather than Fedex etc. I've done that with US suppliers before. Link to comment Share on other sites More sharing options...
Astroscot2 Posted July 20, 2019 Author Share Posted July 20, 2019 Found this, bought today and does exactly what I need thankfully. Mark https://www.screwfix.com/p/eye-bolt-steel-3-8-x-200mm/12120?_requestid=496167 Link to comment Share on other sites More sharing options...
sloz1664 Posted July 21, 2019 Share Posted July 21, 2019 14 hours ago, Astroscot2 said: Found this, bought today and does exactly what I need thankfully. Mark https://www.screwfix.com/p/eye-bolt-steel-3-8-x-200mm/12120?_requestid=496167 Glad you found what you were looking for Mark. It still makes me chuckle on the descriptions though. 3/8" x 200mm. Shouldn't this be 3/8" x 8" 🙄 Also, 3/8"..... what thread? 3/8" BSF, 3/8" BSW, 3/8" UNC, 3/8" UNF..... I could go on...... Steve Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.