Heskyyyyy Posted July 29, 2020 Share Posted July 29, 2020 (edited) Messier 10 Globular cluster, with 115 x 10 second subs at iso 3200, moon very nearby. A bit of amp glow in the bottom left I just noticed, so gotta keep an eye on those in the future to crop out. I'd say this is a very big improvement from my messier 3. Edited July 29, 2020 by Heskyyyyy 1 Link to comment Share on other sites More sharing options...
Nerf_Caching Posted July 29, 2020 Share Posted July 29, 2020 (edited) 19 minutes ago, Heskyyyyy said: Messier 10 Globular cluster, with 115 x 10 second subs at iso 3200, moon very nearby. A bit of amp glow in the bottom left I just noticed, so gotta keep an eye on those in the future to crop out. Wow nice picture you've got there! I hope you don't mind but I took the liberty to download a png of your picture and did some further processing myself using Siril and GIMP. I first did a background extraction in Siril to remove the gradient on the picture. I then transferred it to GIMP to crop the stacking artefacts, remove the color cast with curves and finally performed a slight desaturation of the background. There are residual artefacts on the upper right but that can be easily cropped. Keep up your good work! Edited July 29, 2020 by Nerf_Caching 2 Link to comment Share on other sites More sharing options...
Heskyyyyy Posted July 29, 2020 Share Posted July 29, 2020 2 hours ago, Nerf_Caching said: Wow nice picture you've got there! I hope you don't mind but I took the liberty to download a png of your picture and did some further processing myself using Siril and GIMP. I first did a background extraction in Siril to remove the gradient on the picture. I then transferred it to GIMP to crop the stacking artefacts, remove the color cast with curves and finally performed a slight desaturation of the background. There are residual artefacts on the upper right but that can be easily cropped. Keep up your good work! Not at all! Very very nice 1 Link to comment Share on other sites More sharing options...
Heskyyyyy Posted July 29, 2020 Share Posted July 29, 2020 I just want to say thank you y'all for the tips so far on post processing. I'm likely to be getting an eq mount by summer next year, so these tips will totally come in handy. Please keep it up Link to comment Share on other sites More sharing options...
Filroden Posted July 30, 2020 Share Posted July 30, 2020 14 hours ago, Heskyyyyy said: I just want to say thank you y'all for the tips so far on post processing. I'm likely to be getting an eq mount by summer next year, so these tips will totally come in handy. Please keep it up The single biggest tip for post processing Alt Az images is to crop. Crop heavy! You need to remove all the stacking artefacts caused by field rotation before doing any other post processing otherwise it will be a nightmare. And those artefacts can reach far into an image so really stretch the image to see them, undo the stretch and make sure to crop inside. Of course, the single biggest top for pre-processing any image (alt-az or eq) is use flats and either darks/flat-darks (for cooled cameras) or bias/bias (for uncooled cameras). The goal is to get your starting stacked image to be as clean as possible to make the rest of the processing easier, especially gradient removal and colour correction. 1 Link to comment Share on other sites More sharing options...
Heskyyyyy Posted July 30, 2020 Share Posted July 30, 2020 (edited) 11 hours ago, Filroden said: The single biggest tip for post processing Alt Az images is to crop. Crop heavy! You need to remove all the stacking artefacts caused by field rotation before doing any other post processing otherwise it will be a nightmare. And those artefacts can reach far into an image so really stretch the image to see them, undo the stretch and make sure to crop inside. Of course, the single biggest top for pre-processing any image (alt-az or eq) is use flats and either darks/flat-darks (for cooled cameras) or bias/bias (for uncooled cameras). The goal is to get your starting stacked image to be as clean as possible to make the rest of the processing easier, especially gradient removal and colour correction. Will do. Thanks Edited July 30, 2020 by Heskyyyyy Link to comment Share on other sites More sharing options...
JonCarleton Posted July 31, 2020 Share Posted July 31, 2020 (edited) I finally got around to processing some of the stuff I have been shooting. Here's a whirlpool galaxy: Image captured as 100, 1.5 second @ 50% gain subs with the SVBONY305 and AstroDMx_Capture software. Processed with Siril (stacking), StarTools (image clean-up, color balance), then GIMP (sizing and cropping) all in Linux. Darks, Bias & Flats were not used. Scope was a SkyWatcher 250P with Synscan, however, tracking was done with INDI indi_skywatcherAltAzMount driver and no guide scope. Synscan GOTO was not used. Edited July 31, 2020 by JonCarleton 7 Link to comment Share on other sites More sharing options...
happy-kat Posted July 31, 2020 Share Posted July 31, 2020 Nice capture with colour. It would be very helpful to other members if you could add the setup used and exposures taken please Link to comment Share on other sites More sharing options...
happy-kat Posted August 1, 2020 Share Posted August 1, 2020 Thank you for the added info. The colour on the left in what I call the eye is lovely. I'm intrigued by the framing of the galaxy, did you heavily crop or just the stacking artifacts off? I always assume galaxies would be small in an image. Link to comment Share on other sites More sharing options...
JonCarleton Posted August 1, 2020 Share Posted August 1, 2020 (edited) That galaxy is pretty large, but the Skywatcher 250P (254mm X 1200mm) with the SVBony305 has a very tight FOV. I struggle with that for really large objects, such as Andromeda Galaxy. I have tried a .5 reducer, but it causes focus issues and probably needs an extension tube. There was a bit of cropping for drift between frames, but not much. I'd say less than 5%. I did shave a bit off the left side for centering, but again, very minimal. I also bined X4 the entire image, but that would not increase the "fill" of the galaxy in the frame. Thank you for your kind comments. Edited August 1, 2020 by JonCarleton Link to comment Share on other sites More sharing options...
Ags Posted August 9, 2020 Share Posted August 9, 2020 I took this a while back with my ASI178MM, C6 and AZ GTi. Lots and lots of 0.3 second exposures. 8 Link to comment Share on other sites More sharing options...
The Admiral Posted August 9, 2020 Share Posted August 9, 2020 (edited) 2 hours ago, Ags said: I took this a while back with my ASI178MM, C6 and AZ GTi. Lots and lots of 0.3 second exposures. I like that! Shows what can be done with an Alt-Az mount and long focal length, albeit at the expense of filling up your hard drive . Ian Edited August 9, 2020 by The Admiral Link to comment Share on other sites More sharing options...
Ags Posted August 9, 2020 Share Posted August 9, 2020 True - I have to empty my hard drive after each session! Link to comment Share on other sites More sharing options...
JonCarleton Posted August 20, 2020 Share Posted August 20, 2020 True to form, I missed again and still got an image. I really am going to have to sit down and get good at plate solving. This time I was aiming for the Trifid Nebula and ended up with the Lagoon. I eventually did find the Trifid and have also included my reshoot of the Dumbbell Nebula that was my original mistake ( I was aiming for the Angelfish Cluster). All of these are from my Skywatcher 250P/Synscan with a SVBONY 305 camera using AstroDMx_Capture. 200 subs @ 8 seconds/25% gain, 30 darks, no flats or bias. Stacked with Siril, finished with StarTools and Gimp...mostly Gimp, as I am still stumbling along with StarTools. I should also mention that of the 200 subs in each image, I had to eliminate as few as 15 in a batch and as many as 32 resulting from inopportune scope tracking (SynScan). 4 Link to comment Share on other sites More sharing options...
Merak Posted September 24, 2020 Share Posted September 24, 2020 Decided to reprocess some images I took a while back, M61 with NGC4301 and NGC4929 circled. Arrow points to SN 2020JFO. M64 and M104 Meade LX90, Canon 70D, mixture of 30s exposures @ISO1600 + 3200. Processed in Sequator and GIMP. 7 Link to comment Share on other sites More sharing options...
JonCarleton Posted September 28, 2020 Share Posted September 28, 2020 Sombrero galaxy has been a tough one for me. I wish I could get one half as clear as that. Last one I took, one could barely see the dark border. Perhaps I'll try again this season. Link to comment Share on other sites More sharing options...
Jessicles Posted October 23, 2020 Share Posted October 23, 2020 My M13 effort joining the "No EQ" party! 89 x 10s subs @ ISO2000. 130PDS on AZ GTi mount. 8 Link to comment Share on other sites More sharing options...
Planitair Posted November 11, 2020 Share Posted November 11, 2020 On 29/07/2020 at 19:10, Heskyyyyy said: Not at all! Very very nice Crop before stretching or using curves helps Link to comment Share on other sites More sharing options...
Planitair Posted November 11, 2020 Share Posted November 11, 2020 (edited) Back yard Bortle 7 sky, Soul Nebula 120 x 20 sec subs, Lights only, ZWO 533 pro has no Amp Glow which helps, SW Az/Eq in Alt Az mode, SW 80mm Espirit, Optolong L-eNhance filter, Cropped to cut out some Field Rotation, Stretch & Curves only in GIMP. Tip: Crop before any processing Edited November 11, 2020 by Planitair 2 Link to comment Share on other sites More sharing options...
Planitair Posted November 11, 2020 Share Posted November 11, 2020 (edited) Previous equipment was Celestron Evolution 9.25 with 6.3 FR, Atik Infinity OSC, as mentioned best quality images are gained on EQ mounts with guiding etc, I find Alt/Az suits my purpose of imaging DSO's , my intention was when I started to out to build a library of captured images, most of my early ones are very grainy with noise etc, they are now improving to a standard that I am personally happy with, If you are happy with your images thats all that matters, some really good advice on SG & Cloudy Nights, but, I have to say the question of equipment is very Subjective, what works for some doesn't necessarily work for others, Trial and lots of errors has been the order of the day for me, the Weather has been particularly poor in the NW England this year so far , but one good night and you forget all the other cloudy nights. eric Edited November 11, 2020 by Planitair 3 Link to comment Share on other sites More sharing options...
AstroNebulee Posted November 14, 2020 Share Posted November 14, 2020 On 24/10/2014 at 06:45, tingting44 said: nice! im amazed how the core can still be blown out even with 8sec subs! this target really is bright, I can not wait to try this one later on in the year, after I finish my M31 project if you take subs at a lower iso with just the trapezium core, you can then merge them in photoshop and have a clear core, going to try this soon now Orion is better in view, clear skies 1 Link to comment Share on other sites More sharing options...
AstroNebulee Posted November 14, 2020 Share Posted November 14, 2020 On 23/04/2015 at 18:20, JGM1971 said: oops! Canon 600D attached to my Nexstar 6SE. ISO 6400, for 20secs. That's about the max I can get without star trailing, although I took about 20 shots of both targets and these were the best of the bunch. No flats, darks or bias frames subtracted from either, but I ran them through Photoshop to sharpen a bit and tweak levels. hi do you piggy back your dslr all the time or just for some targets, really love this thread 1 Link to comment Share on other sites More sharing options...
JonCarleton Posted December 13, 2020 Share Posted December 13, 2020 (edited) I'm getting used to a new camera (ZWO 178MC)...or more like "not getting used to" the camera. This was 70, 3 second images, stacked (out of 200 with 130 failed) with Siril and processed in Star Tools with a bit of final clean in GIMP. SkyWatcher 250P Dobsonian GOTO Edited December 13, 2020 by JonCarleton 6 Link to comment Share on other sites More sharing options...
happy-kat Posted December 13, 2020 Share Posted December 13, 2020 Nice to see a post. Your combination looks like it could be great on a globular too. 1 Link to comment Share on other sites More sharing options...
JonCarleton Posted December 13, 2020 Share Posted December 13, 2020 4 hours ago, happy-kat said: Nice to see a post. Your combination looks like it could be great on a globular too. Yes, I like globular clusters. They are bright enough to get with my limitations. I am, however, working on improving my lot. I have been working on getting the guiding for my mount driver more stable so I can take some longer exposures. Presently, 3 seconds is about my limit. My guiding works, but it is a bit "overzealous." I believe that if I get just the right mix of parameters, I can calm it down enough to get somewhere in the 10-20 second area without "sausage stars." It isn't an easy road. Most of the tools, such as the Guiding Assistant in PHD2, are designed for fixing RA/DEC issues, and its suggested adjustments don't help. For that matter, most of the guiding algorythms are designed around RA/DEC, so finding just the right tweak is difficult. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now