Jump to content

NLCbanner2024.jpg.2478be509670e60c2d6efd04834b8b47.jpg

Ha filter with modded DSLR?


Beardy Bob

Recommended Posts

Just found this thread. I have just got myself a 12nm Astronomik filter for my 450D.

I have been doing some googling, and it appears 900secs is about the right length for the subs @ 1600 ISO does any-one disagree with this.

Psychobilly:

Yep they are red and you pull out just the R channel form the RGB image...

Just wondering how you pull out the red channel, do you just switch the other channels off and re-save?

Carole

Link to comment
Share on other sites

  • Replies 37
  • Created
  • Last Reply

The sub length depends on your subject, the sky conditions and speed of optics as well... so there isn't a single answer.

I use Nebulosity as a batch pre-processor before align and stack. Depending on what other software you use, it could help prevent confusion that may result from having the other redundant colour channels.

Link to comment
Share on other sites

Just wondering how you pull out the red channel, do you just switch the other channels off and re-save?

I stack using the "super pixel" debayer mode. Then, in PS, I just delete the G and B channels then change the image to greyscale.

Link to comment
Share on other sites

  • 3 years later...
9 minutes ago, Ken82 said:

Does the Baader uhc filter qualify as a narrowband filter ?? It does say for photographic use on the case. Also the number 7nm relates to the pass width of the filters ? 

A UHC is a broadband filter intended to subdue skyglow, mainly for visual use. They were also used by film imagers. I don't know of anyone using them for digital imaging.

The 7nm does indeed mean that the passpand is 7nm wide.

Olly

Link to comment
Share on other sites

Thanks :) would the astronomink 12nm be better for me than the Baader 7nm with a modified canon 6d ??? I can't find a uk supplier for the 12nm ??? I was thinking to just buy the Baader filter set but without a ccd some of the filters would be wasted ?? 

 

http://www.firstlightoptics.com/narrowband/baader-narrowband-ccd-emission-line-h-alpha-filters-2.html

 

 

Link to comment
Share on other sites

20 hours ago, Ken82 said:

Thanks :) would the astronomink 12nm be better for me than the Baader 7nm with a modified canon 6d ??? I can't find a uk supplier for the 12nm ??? I was thinking to just buy the Baader filter set but without a ccd some of the filters would be wasted ?? 

 

http://www.firstlightoptics.com/narrowband/baader-narrowband-ccd-emission-line-h-alpha-filters-2.html

 

 

Tringastro.co.uk and rother Valley optics both sell the astronomink 12nm Ha clip filters.

I'm not sure which nm would be better but I'm pretty sure the lower the nm number, the longer the subs you'll need but I'm not 100% sure on this

Link to comment
Share on other sites

 

On 10 February 2016 at 13:33, Ken82 said:

Thanks Geordie , I can't use the clip filter unfortunately as I'm using a full frame 6d . I might just get the Baader 2" filter set 

 they do XL version of the clip filters now by the way, suitable for full frame sensors.  More £££ obviously!

Link to comment
Share on other sites

I use a 'poor-man's Ha filter' with my modded 1100D.  The camera has a semi-permanently mounted Hitech IDAS filter.

http://www.firstlightoptics.com/light-pollution-reduction-imaging/idas-mfa-filter-adapter-kit-for-canon-eos.html

If I then add a Red filter with a sharp with a sharp cut off , I end up with a broadband Ha filter.

See - http://www.firstlightoptics.com/light-pollution-reduction/idas-narrow-band-nebula-lps-v4-filter.html

 

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue. By using this site, you agree to our Terms of Use.