-
Posts
1,898 -
Joined
-
Last visited
-
Days Won
9
Content Type
Profiles
Forums
Gallery
Events
Blogs
Everything posted by HollyHound
-
Arriving super quick from @FLO, thanks guys π The new ScopeTech Mount Zero π Now need to get it fitted sometime today to the Uni 28 for a test... more information to follow here:
-
Here are the two extensions I have: Skywatcher AZ5 extension pillar (3/8β top and bottom, weighs 0.8kg) TechoSky(??) extension pillar (top adaptor 3/8β, bottom adaptor M10, weighs 1.2kg). Actually just tried, and it is possibly to thread the SW 3/8β into the TechnoSky M10 and it was quite solid, so yes perhaps the tolerances are close enough to allow this. Still not sure I would trust the SW pillar with a heavily loaded SkyTee though.
-
Out of interest, Iβve been assuming 3/8β and M10 are not compatible... close but not quite... is this assumption correct ?
-
I have that very same pillar (supplied with a number of the SW mounts, mine came with an Avant) and itβs worth noting that itβs thread (top and bottom) is 3/8β rather than M10. Isnβt the SkyTree an M10 thread ? If so that could make a difference in connection solidity, and might cause that spinning. Iβm also a bit dubious about the solidity of that pillars top mounting plate, as itβs only held on with three small screws, fine for AZ GTI, AZ5, Avant etc, but SkyTee is a heavy mount with fairly high capacity! Iβve got another extension pillar now (received with the Castor mount I bought recently), that has M10 bass and 3/8β top, and does seem a little better made too. Might be worth checking around for something similar. Also FWIW, my SkyTee was moderately stiff for the first few hours of use, but it now zooms around very smoothly even under dual scope load... maybe the grease βbedsβ in π€
-
+1 for the Mak 102... this was my first scope and used it quite happily, until I gave it to a family member and upgraded to the Mak 127 π
-
Iβve got both the C5 and Mak 127 and love both. The C5, as was said earlier, is a really nice scope for grab and go. Itβs very light, easily mounted on anything (I have it on an AZ5), and gives a useful 5β of aperture (so excellent for DSOs as well as very decent for lunar and planets). It can take a little while to cool down, but certainly very usable immediately. As the earlier post pointed out, a focal reducer can be used which gives a wider brighter field of view. The Mak 127 is a bit heavier and takes a bit longer to cool down properly, but gives truly excellent views of the moon and planets. Really good for double stars and good on DSOs too. Both of these attract dew fairly easily, so a dew shield is really required (also protects the front glass correctors). There are reviews of both scopes here, from a very experienced reviewer... http://www.scopeviews.co.uk/CelestronC5XLT.htm http://www.scopeviews.co.uk/SW127Mak.htm Good luck with the hunt π
-
Hi, Welcome to the forum π Cheers Gary
-
I have delivery confirmation for tomorrow... weathers not too good (of course), but at least I can try it out on the Uni 28 and SW 1.75" steel tripod (neither of which are particularly lightweight but quite solid) and see how it fares with long refractor and small SCT π€
-
Show me your eyepiece/accessories case, please.
HollyHound replied to Leegsi's topic in DIY Astronomer
Looks really good and should keep all those eyepieces nice and safe. I spy a full set of Nirvana ES (4mm, 7mm and 16mm) in there π -
Yes, amazing manual. I tried Google Translate on it, but was too large apparently π¬ Direct link to the manual PDF: https://scopetown.jp/wp-content/uploads/2020/02/8735b375f33950827dba0092deb8b3a7.pdf Interestingly, the manual has a lot of QR codes dotted throughout and each one opens a different video with detailed walk throughs of the various functions, technical details and configuration of the mount π
-
The rack and pinion focuser is very substantial and I guess the tube must be quite thick I suppose π€ Iβve not actually looked too closely down the tube, to see how many baffles it has, but yes maybe theyβre made of lead π€£
-
Both wrote the same description at the same time π€£
-
It is remarkably heavy, but does feel built like a tank! I will report back as soon as I get it tested π
-
In case it helps anyone else (and hopefully this is allowed), here's some further information on this mount that I've found... https://digiborg.wordpress.com/2020/05/22/classical-astronomy-from-japan-mount-zero/ https://digiborg.wordpress.com/2020/05/23/scopetech-mount-zero-2/ https://digiborg.wordpress.com/2020/05/26/scopetech-mount-zero-3-high-magnification-test/ https://digiborg.wordpress.com/2020/05/28/scopetech-mount-zero-4/ Japanese information (via Google translate): https://translate.googleusercontent.com/translate_c?depth=1&pto=aue&rurl=translate.google.co.uk&sl=ja&sp=nmt4&tl=en&u=https://scopetown.jp/products/zero/&usg=ALkJrhiJ--Q-7oYgnsndJPiJwEg0hPP_qg https://translate.google.co.uk/translate?sl=ja&tl=en&u=https%3A%2F%2Freflexions.jp%2Ftenref%2Forig%2F2020%2F03%2F25%2F10495%2F https://translate.googleusercontent.com/translate_c?depth=1&hl=en&pto=aue&rurl=translate.google.com&sl=auto&sp=nmt4&tl=en&u=http://star-party.jp/wp/%3Fp%3D25091&usg=ALkJrhhcgQIZatXf_bGJqwz13NzDVv2EVg
-
Ok, after a good deal of research on a number of Japanese sites (translated), I've decided to give this mount a go as a potential replacement for the AZ5. @John I'll also be very interested to see how it fares with the StellaMira 80mm f/10... having a tube length of 800mm and with 2" diagonal, 9x50 RACI finder and a Panaview 38mm eyepiece (my largest) fitted, comes in at 6.2kg (the mount is rated to 7kg), it should be a good test! Just need to be patient now for the delivery from @FLO π
-
This mount looks very interesting indeed. I wonder if it would be a good (albeit quite pricey) replacement for my AZ5. Some of the articles I've read also show that it can be used right or left handed (which would suit my C5 much better... finder positioning) and also the clamp has M6 and M8 screws at 35mm (which would take the same ADM saddles I have on my SkyTee or indeed others) π€ In addition, I did try the StellaMira on the AZ5 and found it prone to some vibration, which I guess must be due to the long tube, as the C5 has no such issue on this mount.
-
NEW iOptron CEM70 Center Balanced Equatorial GoTo Mount
HollyHound replied to FLO's topic in Sponsor Announcements and Offers
Could you confirm if that is the iOptron Portable TriPier that its shown attached to ? Not getting one now, but as I have that TriPier, it would be good to know for the future π Thanks -
Now hereβs a seemingly odd purchase for astro... a small mesh desk pen pot π€ However, when I have my Mak or C5 pointing downwards to cool with the visual back open for an hour, this will sit over the end and (hopefully) keep any small insects out (we live on a dairy farm!) π Iβm sure there are other solutions, but this was Β£1.99 on Amazon and should do the job.
-
Eyepiece choice for 16 inch dobsonian
HollyHound replied to paul acreman's topic in Getting Started With Observing
+1 for this. Very useful zoom eyepiece, which I keep in my grab and go C5. Not very wide view at 24mm, but I found it a great way to learn about different magnifications on varying objects. Fits both 2β and 1.25β and is just so very convenient π -
Eyepiece choice for 16 inch dobsonian
HollyHound replied to paul acreman's topic in Getting Started With Observing
I recently picked up the 18.2 and 13 DeLite from the SGL for sale section, and agree that they are superb eyepieces. Iβm not using them in anything close to that size/type of scope, but when I did som research before buying, I did see the DeLites being compared to Delos, but smaller/lighter and with 10 degrees less FoV. I am looking now to extend my set of DeLite eyepieces, as I like then so much. For your Dob though perhaps Delos are indeed the sweet spot π€ -
Probably wouldnβt help then by saying that the two nights I used my new 24mm Panoptic last week, I had some of the best wide views in both my Mak 127 and StellaMira ππ¬
-
Hi Patrick, Welcome to the SGL forum π Enjoy. Gary
-
Hi and welcome to the forum π Cheers Gary
-
Was tempted by this very model myself a few months back... enjoy π