stash_old

Glad to hear - it is always suggested to get Index's either side of the quoted ones just to be on the safe side. Just depends on your FOV as some are massive (GB's) and will slow things down. Clear Skies and Happy Plate solving 🙂 All you have to dp know is use ATASP and get sub 4s platesolving! 😈

unfortunately not on RPI4 until now - Still had to boot from SD and run the system from SSD 🙂

Had this with Indi DSLR/Gphoto (Canon) many times - I just removed the battery and then switch off camera AND then reboot RPI. It was caused by 2 settings in my Canon 100d - one was NVR(and any other noise reduction settings in my 100d) which Gphoto2 (which indi uses) does(didn't) handle and Mirror Lock(Indi End) if I remember correctly. Now it vary rarely happens 🙂 Dont know your camera but my 100d doesn't have an internal battery as I know of that effects the problems you have experienced - but you live and learn 🙂 Plus recheck your Indi Camera details especially the Res,H & W and UM figures - I did have a corrupted datanase valie but I beleive now days there is a "clear" button for DSLR so you have to enter the DSLR details again. Last option download Free Windows APT connect to camera and see if that clears your problem.

1. There is/was a setting to do a refresh only every XXXX secs - why need to do more than 1 I will never know - any how setting this will get the fix and time from your phone then disconnect phone. 2. Display location file details you changed - if its in the wrong format or hasn't been saved it will revert to Warsaw. 3. Still problems put in a error report on Astroberry GITHUB with all details - debug/logs/screen print etc anything that might help.

Just how it is Radek 🙂 As the saying goes in UK "Rome wasn't built in a day" 🙂

minr always starts from the south. You cannot change anything like starts from North etc as Indi or Ekos ignores. So I just got used to starting south at the horizon - no big deal on the SWAZ goto 🙂

Unfortunately thats doesn't work with SW AZ GoTo - there is no "Write Data" in Ekos or Indi Settings that I could see under any tabs 🙂- Clear yes,Park -yes,Unpark Yes, Park North (never works) Unpark Northe,east,west etc - never works. Also on a SWAZ Goto if you try anything like the above YOU WILL CRASH INTO LEGS as it just goes around and around and around like a merry go round - So I suggest do it as a test with your kit BUT be close at hand .

And I have 1 hairless pink Chiwawa that eats Rottweilers(all 10) for breakfeast - Police trained or not - and then spits out the bones to make an Astroberry Focuser. Also its a trained thief and has a nick name - "The Pink Panther" LOL

Blame the Multitude of ways in which lat/long are being used/represented by different software. Think Kstars uses degree's from east(or is it west) so it uses 0-359 not the DD:MM:SS or DD.DD. So subtracting 2.xxxx from 360 you get 357.xxxxx Not saying there is not error just I found it confusing too originally.

Your Phone if it has a GPS or Ublox 7/8

Anyways its the Sound Man ,Not Rory (LOL) ,who makes the video great to watch - just like in the movies - watch Jaws without the music and its not scary at all - honest😱

FYI - A fancy (LOL) and better new web site. I dont look that often but Radek as changed the Web site ans added a better Documentation section (WIP) https://www.astroberry.io/

Although I would normally steer clear of Prolific chipped devices it free as it comes part of the kit and maybe Prolific have learned their lessons ! Nothing to loose on a test and EQMOD wont know the difference 🙂 Biggest problem maybe getting the correct Windows driver (dont SW provide it ? ) as unlike FTDI chips installation is never straight forward with Windows/Prolific (Prolific at fault) you will most likely have to manually install the software first. So give it a try - if its a new mount at least its guaranteed and if its crap (tech word) ask for a discount from your supplier LOL As for RPI it doesn't use drivers for USB adapters and prolific actually work on Linux ----- when the cable isn't too long - IME(In My Experience) using older models on RPI2/RPI3. Real Prolific chips are not Chinese as they are based it Taiwan which is the Republic of China not Peoples Republic of China which is China LOL As for SW using Fake chips - who knows 🙂 SW do provide the Windows Driver for the chip here http://www.skywatcher.com/download/software/accessories/ "Real" Prolific Drivers here http://www.prolific.com.tw/US/ShowProduct.aspx?pcid=41&showlevel=0017-0037-0041 - had to laugh at this http://www.prolific.com.tw/US/ShowProduct.aspx?p_id=155&pcid=41

I use CCDCIEL created by the same author as CDC Patrick Chevalley. Still officially in Beta but IMO has everything and more than any of the above. Main Features: 1. Works across all platforms- Macos,Windows and Linux 2. Works with Ascom and/or Indi or a combination of the 2. 3. A simple but powerful Sequencer with all the std add on bits - platesolver,guiding control ,auto focus ,unattended mode , dome control etc But still allows a simple Image capture when sequencer not required. 4. Does not tie you down to one specific application - e.g. you can you CDC for your Planetarium or HNSKY 5. Uses multiple Platesolving options with automatica fallback mechanism should the first fail. 6. Enables remote full DSLR operation via Indi - weakest point being it doesn't support dslr direct like APT but then you cant run APT on one PC and have your DSLR on another PC on the mount. 7. Image camera support only limited by ASCOM or INDI offerings. 8. Can be run on most mount SCB - eg RPI3b+ upwards or Windows Mini PC's 9. Has a simple Preview with live stacking feature 10. Scripting language built in. And more Yes there are still things to develope and its still in Beta testing but I have found Patrick is always open to changes and normally delivers changes at speed when possible . Oh and its FREE - for now at least !

Glad you got sorted - ansvr is just a "local" version of Astrometry.net so should work exactly the same (just different URL pointer). Aint the fastest but works 99.99% of the time.

Does anyone know if there is a way to save a Microsoft Sandbox to reflect what you have installed so the next time you load sandbox it leaves off from the point you closed down ? Thanks in advance !!!!!!

Never said it did - ASPS settings wizard calculates the FL from the info you put in from the Astrometry.net solve - "Pixel Scale" - Step 5 then give a new FL. 🙂 Bottom line it works!

Probably already used it by I use ANSVR as backup to ASTAP in CCDCIEL (CCDCIEL does the automatic change to ANSVR if ASTAP fails) - a straigt "COPY" of Online Astrometry.net . Not fast as ASPS but faster than Web 🙂 https://adgsoftware.com/ansvr/

Actual screen print of ASAP settings assistant using details from Astrometry.net !!!!!!!!!!!!!!!!!!

Dont shoot the messenger ! This is what my attempt at online platesolve gave plus FITS header of new image created by same process. dragon-3.txt

If I put the details of the image thru the settings asistant it says the FL is 170 . Using this updated value your image solves - see attached image

OK I didn't read the line 😞

yes becuase its confusing ALS only picks up new files in the monitored folder - so if I forget to start ALS it wont do anything with the existing files it just says running. If I delete the files and add them back in while ALS is up and running then it springs into action. IMO not a good work flow as it should process files already in the monitored folder or have a list of ones it has already processed from the monitored folder. Sorry thats my comments on its work flow. So CR2 files are processed SO LONG as they are added after ALS is started and running the monitoring process. FITS on the other its does not like and gives an error for the FITS files I use - ok in CCDCIEL,ASTAP etc etc Please see attached screen prints which I hope will help you understand whats happening. The Astrotoaster program screen print is there to show the same files being processed ok! here is a link to 1 of the FITS file for your team to test. https://drive.google.com/open?id=1iIdVWzHPn_EXZGiOu9PdaHdCNm6q-qz9 32mb file And yes its Win 10 being used for ALS but the FITS files were from INDI(RPI) via CCDCIEL(Win10) !

No sure if the CR2 is a bug as I could not find a way to list files currently being stacked - may have just missed it 🙂 As for the feature to select only certain files in a folder and be able to deselect a file to restack see attached screen prints. Nightly build ALS nighlty build 2020-05-08-77e1b4e02

Another biggy - no support for DSLR (canon and other ) RAW format files(CR2/CR3 etc) that I could see ! If you know Astrotoaster it works well but needs bringing up todate so if same features could be added ,such as list of files being stacked with option to omit and restack etc - thats where IMO it should look like in terms of features 🙂