-
Posts
782 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Events
Blogs
Everything posted by Ally8446
-
Concentre secondary position issue
Ally8446 replied to Ally8446's topic in Getting Started Equipment Help and Advice
It's a OOUK VX10L and it's brand new so I sincerely hope the spider is properly located. I'm fairly certain that the focuser is in the correct position. There doesn't appear to be any way to move the focuser base plate. I've removed the secondary and put 4 plastic discs between the screws and base of the secondary holder. They are now holding the secondary in a far better position although there is now precious little movement available in the 3 screws. -
As you can see in the first photo, the secondary is as near as damn it, in the correct position. Problem is, as you can see from the second photo, the secondary adjustment screws are nowhere near long enough. Would the addition of 2 or 3 plastic discs from a milk carton fill the gap sufficiently or will I require longer screws ? The scope is brand new and as yet I haven't used it, thanks to our wonderful British weather, so I'm rather concerned at this issue. What are your thoughts please ?
-
Collmination cap or laser
Ally8446 replied to dnl's topic in Getting Started General Help and Advice
The only method I use with a laser is when it is Barlowed. Colli cap, specifically Blackcat XL, is more than sufficient for secondary collimation. I haven't found a laser out the box yet that 'does what it says on the tin' Al -
Anyone recently bought an Orion Optics VX10
Ally8446 replied to Northernlight's topic in Discussions - Scopes / Whole setups
Hi Rich Ok, so first impressions are as follows. Dob Base - The dob base is powder coated metal and while very rigid, is in fact remarkably light and can be carried with one hand. Personally I wouldn't carry with one hand but it's light enough to do so. Its azimuth movement is relatively free while still providing enough 'stiction' as to not be moved by wind. I opted for the friction brake for the ota which works very well. OTA - Made from rolled aluminum and very light so very easy to carry. The OTA comes with end caps for both top and bottom of tube. I found these to be rather loose fitting but once around the diameter with some black electrical tape and they're a snug fit. Focuser is low profile and solid with, as far as I can make out, no slop whatsoever. The 2" - 1.25" adapter is rather stiff to remove but may become easier in cold weather (I was indoors and had been for quite some time). Primary cell is extremely well made, in my opinion, with built in fan. Collimation screws are chunky enough for even the largest, coldest fingers and the springs appear to be substantial so I doubt they'll require uprating. I had to wait 9 weeks for it to be built and as of yet, it has still to see first light. I'll put a report in the observing section when I manage to get out. Feel free to ask any other questions. Regards Al -
I couldn't agree more Gav. Lucksall is a beautiful park in every sense but, the river can flood the park and don't forget the mist it can produce. Also, since Hereford has installed a fair amount of white light as opposed to orange, the white dome is rather annoying. Just my opinion of course. I will most certainly still attend the annual SGLSP no matter where it is held.
-
I'm totally gutted but fully understand. A massive thank you to everyone involved in the organising of SGLSP and thank you to Lucksall for the early warning. Best wishes to all. Al
-
The postman didn't bring it, I collected it. Having recently sold my Lukehurst dob due to it being too heavy and frankly, not being used. I am now the proud owner of an OOUK 10" F6.3 1/10th dob. It is so much lighter and will most definitely be used considerably more than the DL did. Hopefully first light will be SGLSP next weekend, fingers crossed.
-
I'm be bringing my new 10" OOUK F6.3 dob..... Oh, and Jaffas, Jamesons, Thatchers etc.
-
Anyone recently bought an Orion Optics VX10
Ally8446 replied to Northernlight's topic in Discussions - Scopes / Whole setups
I have, only this morning, collected a VX10L from OOUK. At present it is still in the car. I'll be sure to give you my thoughts at first opportunity. Regards Al -
We're only just over the fence line and NOBODY will be getting drunk alone 👍
-
Not to mention..... Unsupervised 😜😜
-
Bring it on. Thatchers is packed @Twisted Lip 😜😜 Might need some help putting the awning up, we are awning virgins.
-
I do appreciate an optimist 👍👍
-
I did indeed sell the Lukehurst. However, it is being replaced by a more usable 10" F6.3 OOUK 1/10th optics 😘 Very much looking forward to the meet.
-
We've now got our own 'cosy' 2 berth caravan. Heater works so it's all good 😎😎💦💦
-
With a glass of your chosen poison in your hand Dave ?
-
Myself and possibly SWMBO will be arriving early afternoon so we'll be around to lend a hand.
-
Is there any sign of a pitch plan ?
-
-
No paracorr required Paz, it's F6.4. I've got a wanted ad on here and ABS for either APM 30mm or ES 82° Al
-
Is it this one you're referring to... http://apm-telescopes-englisch.shopgate.com/item/333631373637
-
No John, no corrector. That's precisely the reason I went for F/6.3 + I'm over 6' tall.
-
Currently I have the following EPs. ES 14 82°, ES 24 68°, BCO 10mm. 2x Barlow. I've just placed an order for an F6.3 10" dob. Unfortunately the Lukehurst had to go due to weight. I'm reckoning I should be looking at a 82° or 100° ES (or similar) around the 30mm FL. Should I sell any of my current EPs ? What would you marvelous folks suggest ? Budget around £500. Al
-
Excellent. Look forward to seeing you there 👍👍