Gina

Went back and checked your post - very interesting. 👍

It's looking like this and weather station thread may spawn a new one for the MQTT system.

I have pretty much decided to go with MQTT for weather station and obsy roof control (and who knows what else). I like the modular approach yet encompassing everything. Seems RPi broker, several ESP32 and ESP6822 clients and client on my Linux Mint box producing graphs and charts. Could add a wall display client too.

I have pretty much decided to go with MQTT for weather station and obsy roof control (and who knows what else). I like the modular approach yet encompassing everything. Seems RPi broker, several ESP32 and ESP8266 clients and client on my Linux Mint box producing graphs and charts. Could add a wall display client too.

Had a look at MQTT on Google and it looks relatively straightforward. However, I reckon you or someone else has written basic parts of the code I would need for my weather station and ESP32 devices. Don't want to "reinvent the wheel" if I can help it.

Do you think this is the simplest way of controlling the roof? I've also had mention of "web sockets". Can a "broker" do more than just control traffic? Like operate a display? I find it interesting that the broker should be an RPi rather than the main desktop. Agreed that this would mean the desktop wouldn't need to run for MQTT to operate.

I may need to rethink the operation of the fold down east window. I was going to use the rather Heath-Robinson rope and pulley system operating from the roof but I realise that the window often needs separate operation from the roof. That has been particularly evident in this hot weather when I have wanted the roof closed but the window open. I could really do with a window that I could open on the west end wall to allow a through airflow but that is a major piece of work! OTOH we don't get this sort of weather very often. ATM the rope and pulley system can be reconnected quite easily at any time so I could resurrect that system for the winter. It's only necessary to close the window if rain or snow is expected from the east. With the prevailing SW wind the window can be left open if it rains so maybe I don't need to rethink the window operation after all.

Good to see progress Dave. 👍

Done some repairs on my observatory. Fastened some shiplap boards that had come loose, plus other parts. Fitted the new cover for the large chain wheel and the wheel itself. Fitted perfectly - amazingly! I'll take a photo later - recovering from the exertion and heat/humidity ATM.

Storm in a teacup!

Yes, that sounds good.

First thought was a meteor but they don't last that long (usually).

I think my web hosting supplies php and mysql but I have more to sort out before I get to that stage. I shall probably look into MQTT in due course. It's beginning to sound like a simpler solution 🤣

I'll read through that when my brain is cooler!

Unfortunately, I couldn't understand what the man was saying - the sound wasn't very good. I'll look up "websockets" on Google.

Found this information, which if I can understand it, may do all I want. I do have a web site which I would like to make use of. Control ESP32 and ESP8266 GPIOs from Anywhere in the World

Also a repeat though. But yes, a good programme.

So far I've been using the ESP32 to read and send data to the browser (and still have more to do in that line) but now I also want to send commands to the ESP and use it for control as well as sensing.

Yes, but for this project I need to send data to the ESP.

So far I've been using the ESP32 to read and send data to a browser but now I want for an ESP to receive data from the browser (or something else) and control the motor that will operate the observatory roof. It will also want to read the state of the roof from the limit switches and motor current, which the motor control unit converts into a voltage, but I know how to do this. What I don't know is how to send commands to the ESP.

Unfortunately, this project has taken a step backwards. There is a serious problem with the large chain pulley and its cover. The cover has broken and the bearing arrangement for the pulley needs improving. This has been causing the roof to jam so I have had to remove the chain and pulley. This is not a problem at the moment since I've been opening and closing the roof manually anyway but before I can complete the project I shall need to print a new pulley cover and sort out the bearing.

I caught one last night before the cloud came in with a vengeance. No-go for the rest of the week it would seem.

I found it quite interesting but that's probably because my memory isn't very good! 🤣 I just about managed to stay awake...

I currently have 4 optical sensors which have 3.1mm slots. The test PLA sheet I used was 1.5mm thick and with the curvature of the inner ring the tolerances are pretty tight so I've ordered some with a 4.1mm slot (5 so I have a spare - I have no spare with my current set).