Grierson Posted March 22, 2021 Share Posted March 22, 2021 Could any member suggest a supplier of reasonably priced E L Panels? I’m looking for a panel 24cm x 24cm excluding the connector. Many thanks. Link to comment Share on other sites More sharing options...
Stuart1971 Posted March 22, 2021 Share Posted March 22, 2021 5 minutes ago, Grierson said: Could any member suggest a supplier of reasonably priced E L Panels? I’m looking for a panel 24cm x 24cm excluding the connector. Many thanks. I bought a round one from Aliexpress with the 12v inverter for £22 posted...worth a look...👍🏼 Link to comment Share on other sites More sharing options...
Dr_Ju_ju Posted March 22, 2021 Share Posted March 22, 2021 (edited) Depending on what colour\backing etc. I found these to be reasonably priced https://elpanelandtape.co.uk/el-panel/ or these https://elwirecraft.co.uk/product/white-el-panel-in-many-sizes-a6-a5-a4-a3-a2-and-a1-2/ Edited March 22, 2021 by Dr_Ju_ju Link to comment Share on other sites More sharing options...
Grierson Posted March 23, 2021 Author Share Posted March 23, 2021 Thank you chaps. I will have a look at them. John Link to comment Share on other sites More sharing options...
markse68 Posted March 23, 2021 Share Posted March 23, 2021 There’s a seller on Etsy called Lightkraft who has 10” circular panels- I just ordered one- but he’s in US so quite high postage but he seems a nice bloke to deal with. 18 hours ago, Stuart1971 said: I bought a round one from Aliexpress with the 12v inverter for £22 posted...worth a look...👍🏼 Hi Stuart, was it a custom panel they made for you? What diameter? I had a look but most seemed to say they wouldn’t ship to uk. Do you remember the sellers name? Mark Link to comment Share on other sites More sharing options...
billhinge Posted March 23, 2021 Share Posted March 23, 2021 I bought a second hand artograph off ebay, paid half normal price (well made, variable lux and colour temp, good quality leds - not cheap but assuming you get what you pay for) https://www.artograph.com/lightpad-series/lightpad-lx-950/ Link to comment Share on other sites More sharing options...
sloz1664 Posted March 23, 2021 Share Posted March 23, 2021 If you want to convert your LED panel to assimilate an Alintak panel here is a great solution DIY LED Panel Steve Link to comment Share on other sites More sharing options...
ollypenrice Posted March 23, 2021 Share Posted March 23, 2021 Just avoid the Aurora panels at all cost. The thin, rigid wires soon break. We went through three of the wretched things here, one a very large, expensive one. The Geoptik is the best I've tried. Olly 2 Link to comment Share on other sites More sharing options...
Stuart1971 Posted March 23, 2021 Share Posted March 23, 2021 2 hours ago, ollypenrice said: Just avoid the Aurora panels at all cost. The thin, rigid wires soon break. We went through three of the wretched things here, one a very large, expensive one. The Geoptik is the best I've tried. Olly This is great to know as I have just bought the Geoptik 164mm version, so can I ask where do you have the dimmer set...as I found it seems to go from very dim, and then slowly gets brighter, then suddenly jumps to the brightest, it’s not the smoothest of dimmers, seems not to have much adjustment at the bright end, or is it just mine...?. Link to comment Share on other sites More sharing options...
ollypenrice Posted March 23, 2021 Share Posted March 23, 2021 1 hour ago, Stuart1971 said: This is great to know as I have just bought the Geoptik 164mm version, so can I ask where do you have the dimmer set...as I found it seems to go from very dim, and then slowly gets brighter, then suddenly jumps to the brightest, it’s not the smoothest of dimmers, seems not to have much adjustment at the bright end, or is it just mine...?. You'll like it, I think. I doubt that you'll want to be anywhere near the bright end. I'm usually right down near the dimmest where the variable control is fairly progessive. That isn't just on my kit, either, since I periodically do flats with my robotic clients on their various rigs. I like the fact that you leave the panel securely in place knowing it won't fall off or become displaced. Olly 1 Link to comment Share on other sites More sharing options...
Grierson Posted March 23, 2021 Author Share Posted March 23, 2021 Thanks for all the contributions. I’ve ordered a panel from ELWirecraft (thanks Dr-Ju-ju!) which hopefully will arrive tomorrow. - John Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now