Allinthehead Posted September 7, 2020 Share Posted September 7, 2020 Still testing and tuning the Epsilon 130, I believe I have a pinched mirror due to over tightening the mirror clips. I also want to mask out the mirror clips to remove the reflections around the brighter stars so still work to do. This is just 3 hours in 180 second subs. I upped the gain to 100 and trialed using dark flats instead of darks. I ended up with a much cleaner stack than before so i might continue with gain 100 and gather some short exposures for the stars. Asi2600 through a Tak Epsilon 130 mounted on an AzEq6 Processed in PI, APP and PS. Richard. 18 Link to comment Share on other sites More sharing options...
tooth_dr Posted September 7, 2020 Share Posted September 7, 2020 That is quite the image Richard! You are a man in control of that Epsilon! Link to comment Share on other sites More sharing options...
Allinthehead Posted September 7, 2020 Author Share Posted September 7, 2020 21 minutes ago, tooth_dr said: That is quite the image Richard! You are a man in control of that Epsilon! Thanks Adam, a bit more tinkering needed. Link to comment Share on other sites More sharing options...
MarkAR Posted September 7, 2020 Share Posted September 7, 2020 Very nice image. Link to comment Share on other sites More sharing options...
Allinthehead Posted September 7, 2020 Author Share Posted September 7, 2020 27 minutes ago, MarkAR said: Very nice image. Thanks Mark, glad you like it. Link to comment Share on other sites More sharing options...
Kinch Posted September 7, 2020 Share Posted September 7, 2020 Fantastic Star Field - the problems of which you speak are perhaps in your high resolution image only - nothing amiss that I can see here (except maybe on that brightest star - which is still OK). Nice one 👍 Link to comment Share on other sites More sharing options...
Allinthehead Posted September 7, 2020 Author Share Posted September 7, 2020 1 hour ago, Kinch said: Fantastic Star Field - the problems of which you speak are perhaps in your high resolution image only - nothing amiss that I can see here (except maybe on that brightest star - which is still OK). Nice one 👍 Thanks Brendan, all easily fixed issues. The reflection is pretty ugly though, looks a little like a radioactive symbol. Link to comment Share on other sites More sharing options...
Graham Darke Posted September 7, 2020 Share Posted September 7, 2020 Very nice indeed, as usual... Link to comment Share on other sites More sharing options...
Allinthehead Posted September 8, 2020 Author Share Posted September 8, 2020 15 hours ago, Graham Darke said: Very nice indeed, as usual... Thank you Graham. Link to comment Share on other sites More sharing options...
gorann Posted September 8, 2020 Share Posted September 8, 2020 (edited) That is an excellent result Richard. The "radioactive" star issue is really minor. You clearly got the right chip distance and no tilt since the stars are nice and round over the whole field. Come to think of it, you must have done this under a nearly full moon - that is extraordinary. Edited September 8, 2020 by gorann Link to comment Share on other sites More sharing options...
Davey-T Posted September 8, 2020 Share Posted September 8, 2020 Lovely image Richard, if I can get the Shitstar to work that well I'll be happy, got it mounted on the Rainbow mount just waiting on a few ZWO bits from FLO. Dave Link to comment Share on other sites More sharing options...
Allinthehead Posted September 8, 2020 Author Share Posted September 8, 2020 3 hours ago, gorann said: That is an excellent result Richard. The "radioactive" star issue is really minor. You clearly got the right chip distance and no tilt since the stars are nice and round over the whole field. Come to think of it, you must have done this under a nearly full moon - that is extraordinary. Thanks Gorann, no it's not a huge issue on these stars at least but on the brightest of stars it really is quite distracting. It's easily fixed so I might as well. You're correct about the moon, it was at 85% but it was quite low and in the opposite direction. My biggest challenge with this image was the cloud, i got 100 subs but could stack only 60. 3 hours ago, Davey-T said: Shitstar 😂 Thanks Dave, Is it driving you nuts? 1 Link to comment Share on other sites More sharing options...
Davey-T Posted September 8, 2020 Share Posted September 8, 2020 3 hours ago, Allinthehead said: 😂 Thanks Dave, Is it driving you nuts? Slowly, keep throwing money at it hoping to make life easier 😂 Dave Link to comment Share on other sites More sharing options...
Allinthehead Posted September 8, 2020 Author Share Posted September 8, 2020 (edited) 3 hours ago, Davey-T said: Slowly, keep throwing money at it hoping to make life easier 😂 Dave I think an Epsilon might have been cheaper at this rate😄 although where's the fun in that. I just finished removing my primary to effectively mask off the clips with a black marker😯, a very crude effort. You're going to hate me, even after removing the mirror clips when I reassembled it still held collimation. 🤭 Might be worth having a mask made up, anyone have a 3d printer? Edited September 8, 2020 by Allinthehead Link to comment Share on other sites More sharing options...
Davey-T Posted September 8, 2020 Share Posted September 8, 2020 At least you have mirror clips 😂 Dave Link to comment Share on other sites More sharing options...
Allinthehead Posted September 8, 2020 Author Share Posted September 8, 2020 16 minutes ago, Davey-T said: At least you have mirror clips 😂 Dave Posh out 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now