Jump to content

SkySurveyBanner.jpg.21855908fce40597655603b6c9af720d.jpg

First Light - C80ED

jgs001

By jgs001
in Member Equipment Reviews

Recommended Posts

jgs001

jgs001

Posted
Posted

Oh boy, what a Telescope. I got this on offer from FLO and it arrived yesterday. Today was my first opportunity to setup and test. First impressions, this is a well built solid instrument. The tube, focuser, focus knobs, adapters and even the dew shield are all metal. This puts the weight up, but it's only 1/2 Kg heavier than the Konus for all that. The focus knobs are about twice the diameter of the Konus, so whilst this has a single speed rack and pinion focuser, the action is very smooth, with far more fine ability and appears to have no slack at all. The 6x30 finder is clear, operates in a normal upright mode (this caused me real problems with the original Konus finder) is clear and bright, and has a well made metal mount with spring loaded alignment. The scope sits snugly in the tuberings on my existing NexStar SLT mount, and the colours match perfectly, down the writing around the dew shield matching the stripe on the mount.

IMG_9552.jpg

Visually, the same view was crisp and precise using both the 6.5mm Ortho and the 5mm Hyperion. I had some CA creep in when using the TAL x2 barlow, but using the Hyperion tuning rings instead sorted that out. (I think I need a Celestron Ultima barlow now).

I had to go out, early evening, but had a few minutes for a couple of quick tests on the moon. I used the provided clamshell tube mount to fit the 80 to a camera tripod, and here was the only problem with the scope. The clamshell doesn't lock properly, it uses a pair of clips to lock in place, one locks and the other doesn't. I was ok using this with the moon low down for a test, but I wouldn't want to trust the clamshell if I was pointing the scope higher up towards the zenith. I'll get onto FLO about that.

I've posted the test images of the moon when the scope was tripod mounted here

After my outing, I was able to get the scope out for an hour. I carried out my normal NexStar level and align, only using a Solar System align on the Moon. I really need to work out what the centre of the moon is for alignment, as the view always drifts about when I do this.

Anyway, the vie w through the Ortho was quite amazing, and I was able to focus with just the mirror diagonal, no extension tubes needed. I then swapped to the 5mm Hyperion, and the view took my breath away. Amazing amounts of detail showing through, that with the Konus I've never seen before. I then decided to push it to see how far I could go. I put both tuning rings in the Hyperion, making it a 2.5mm ep, and giving 240x magnification. Now by all logic, this should be seriously overpowering the scope and on that basis the view should have deteriorated. I have to say, that I could see no difference in the view, apart from getting that much more closely in. The craters all looked really refined. Aristarchus and the nearby Schroeter valley looked amazing and clear, with well defined edges. Seeing was somewhat wobbly, but didn't interfere too badly. I just went for a little tour around the terminator, and was surprised to see some of the surface features away from the terminator, that in the Konus showed no real definition, appears quite clear in the C80ED.

I then changed to try some webcam imaging. And shot a series of different avi's at various focal lengths, using just the webcam, the x2 barlow and the x5 barlow. I was able to achieve focus without using any extensions at all the focal lengths. I have yet to process them, and I'm not 100% I got the settings right, and the drift may have a negative effect on the resulting image once processed, but it's all good experience, and clearly shows to me how much easier this scope is to use.

Then I had to pack up, as my powertank was flagging and the clouds moved in.

I have to say, I'm really impressed with this scope, and I'm really glad I grabbed it before stock ran out, as the prices was excellent.

Link to comment
Share on other sites
Rob

Rob

Posted
Posted

The only thing I would say about mine is that it does tend to dew up on the inside of the lens cell aswell as the outside... so it needs to sit and dry out after obs session.

Anyone else had this with theirs?.

Link to comment
Share on other sites
jgs001

jgs001

Posted
  • Author
Posted

Cheers Mick. Can't say I've noticed Rob, but I was only out for an hour, and only the EP misted up, I didn't realise my eye gave off that much moisture. How would you suggest parking the scope ? I would normally point the lens cell down, leave the cap off to allow it to dry. If the lens mists up internally, then any water will pool behind the lens.

Link to comment
Share on other sites
gary1968

gary1968

Posted
Posted

I agree with what jgs001 said about this scope, it is a cracker.... :-) The views of the moon are amazing and I am looking forward to seeing what it can do with my webcam.

The clamshell is not very good, one clip locks fairly good and the other does very little. I have mine mounted in a set of home made guide rings now so its not that important but I may give Steve a call to see what he says, although they all seem to be the same so it might not be worth it really.

Gary

Link to comment
Share on other sites
Tiny

Tiny

Posted
Posted

The only thing I would say about mine is that it does tend to dew up on the inside of the lens cell aswell as the outside... so it needs to sit and dry out after obs session.

Anyone else had this with theirs?.

Is your lens cell screwed in tight. The whole cell and the dew shield unscrew as a unit.

Link to comment
Share on other sites
Rob

Rob

Posted
Posted

The only thing I would say about mine is that it does tend to dew up on the inside of the lens cell aswell as the outside... so it needs to sit and dry out after obs session.

Anyone else had this with theirs?.

Is your lens cell screwed in tight. The whole cell and the dew shield unscrew as a unit.

Going to check that tonight... Had a long chat with Chris in Tech support @ David Hinds, so should resolve the issue one way or another - the tightness of the lens cell was mentioned.

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

Go to topic listing

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue. By using this site, you agree to our Terms of Use.