Which Bench PSU for Observatory

[Earl]

Im have a few intermitant Power issues so I need a good Bench PSU to solve it all.

Devices ran off it will be :

Mount, CCD, Dew Heater, via Mount Hub Pro, Dome control and rotation Motor.

I also have Lighting, Network Hub and Cloud sensor to run.

I have been advised a  Ep-925 or a Watson W - 30A

Any others worth looking at?

[keithatrochdale]

Hi may be worth a look here, scroll down;

http://www.hobbystores.co.uk/default.asp?WPG=HOB_HomePage1&PageNumber=1&s=c:0,c:050,c:050-070

Also if you like a bit of DIY and money saving this may be of help;

http://www.rcmf.co.uk/4um/index.php?page=139

.

[Starlight 1]

From setup I seen on here a lot go for maplin regulated 13.8v rated current 7A max current 9A . one for mount and one for the rest .

[r3i]

Hi may be worth a look here, scroll down;

http://www.hobbystores.co.uk/default.asp?WPG=HOB_HomePage1&PageNumber=1&s=c:0,c:050,c:050-070

Also if you like a bit of DIY and money saving this may be of help;

http://www.rcmf.co.uk/4um/index.php?page=139

.

+1 for the Pro Peak, I've been using one of the 20A dual units for a few years and it has worked admirably. The fan gets a bit noisy when the dew heaters and cameras are full on but can't fault it otherwise.

[SkySurfer]

Hi,

I bought the 15amp one and works a treat, they do bigger versions too, scroll down the page and there is a 4 output 30amp version

http://www.tantronics.co.uk/acatalog/Bench_Top_Power_Supplies.html

:)

SS

[Earl]

I have 2 of these on the way.

http://www.sharman-multicom.co.uk/SHARMAN-EP-925-3-15V-DC-25-30A-REGULATED-PSU--ANALOG-METERS.2.html

One dedicated to the scope n stuffs and the other for the rest.

[SkySurfer]

I have 2 of these on the way.

http://www.sharman-multicom.co.uk/SHARMAN-EP-925-3-15V-DC-25-30A-REGULATED-PSU--ANALOG-METERS.2.html

One dedicated to the scope n stuffs and the other for the rest.

Nice, they look expensive........

SS

[m.tweedy]

i use thishttp://www.amazon.co.uk/Nevada-PS-30M-Linear-Power-Supply/dp/B007CGBTOQ/ref=pd_cp_ce_1