Pictures taken during some LX/mono mods

[geppetto]

Been modifying some cameras to long exposure and mono chip

for a few mates this last few days.

Decided to take some "in progress" pictures which might be of use

to any body contemplating their first webcam mod.

Plenty of information on this site but you can't have too many pictures:D

Philips SPC900NC uncovered

Won't accept responsibility for errors, or damage you may do to

your equipment and I don't want to do any more modding....

No really

Hope these are of some help...

[geppetto]

[geppetto]

[geppetto]

[geppetto]

[geppetto]

Here's shots of both sides compared to a 20p coin....

Good quality small iron bit helps a lot...I use a 1.5mm on some joints

and only ever use 0.6mm solder not the standard stuff which is too thick

and can flow across pins.

[geppetto]

LX wires added.

[geppetto]

Setting up the 4066B chip

[geppetto]

4066 stuck to large square chip on camera board

using double sided tape

[geppetto]

Last lot....

If you're new to this LX modding, do yourself a favour and mount the camera boards and switch into a nice cheap Maplin plastic box.

There's very little room in the original camera box.. seriously

[MrJulius]

Excellent pictures, maybe I should try doing the long exposure mod on my mono SP900NC

Should be moved/stickied as a tutorial.

[Psychobilly]

Cheers Phil

Nice clear pics and plenty off em.. great stuff

Peter...

[geppetto]

Cheers guys, pleased the pictures may be useful:)

Peter

Re that wide angle lens you retro fitted to the webcam..

Another method is to move the black plastic lens holder block away from the circuit board a few mm using insulated washers

and longer screws..

Think you could get enough to allow the wide lens to screw in giving you better focus control:icon_salut:

[Psychobilly]

Cheers Phil,

It's worked out quite well as the thread has formed in the "glue" but if i do another i will go with your suggestion... it would need to move forwards about 3-4mm to get a few threads engaged...

Where are you getting the 4066's from? RS/Franell have them so i can add a few to our next order bitbox have them as well...

Peter...

Peter...

[geppetto]

All the bits for these from Bitbox Peter...

That guy is a star... never had to wait..

Only slight gotcha though is that his miniature SPDT switches are bigger than the Maplin miniature ones so a tight fit in the camera case..

Sub miniature would be better I reckon....

[nebogipfel]

Thanks Philip, there are other pictures on the web but none are as clear as these. I think even I can manage to follow them now!

Very helpful

[acme]

Hi guys,

Any chance of the product codes for the components to do the LX mod please.

Acme

[geppetto]

This is an order sheet to Bitsbox..

Note the quantities are for two mods so halve it for one...

The switch is a tad big so you might do better getting a smaller one from say Maplin if you're doing the mod in the original case.

This one SPST

http://www.maplin.co.uk/Module.aspx?ModuleNo=2340

Maplin do the other bits too if you prefer

Bitsbox - UK Electronic Components Distributor

[Psychobilly]

Nice One Phil,

Peter...

[acme]

Thanks for the info Phil.....Pete the heat shrink came today, cheers matey.

Acme.

[Psychobilly]

No Worries...

[tooth_dr]

That's very nicely done, and great write up

[simon84]

Excellent stuff Phil, I can see myself having another little project to do soon.

[Earl]

Can this mod be done with just USB?

[geppetto]

Can this mod be done with just USB?

Best to just get a serial/parallel to USB convertor