BRUN Posted January 4, 2017 Share Posted January 4, 2017 Used my scope for the first time tonight, I need a moon filter lol, Jesus it's bright. Both me and my dad had watery eyes pretty quickly and it's not even a half moon at the moment. FLO website suggests 0.9 density for 4-10", I'm on a 10" Skyliner 250px, but I'm worried it won't be strong enough. Also what are the variable ones like, would I be better with one of those ? Link to comment Share on other sites More sharing options...
alanjgreen Posted January 4, 2017 Share Posted January 4, 2017 I use a 0.9 with my 11inch. its fine. It lets 12.5% of light through, blocks 87.5% Link to comment Share on other sites More sharing options...
mikeDnight Posted January 4, 2017 Share Posted January 4, 2017 May be a variable polarizing filter will suit! Link to comment Share on other sites More sharing options...
Paul73 Posted January 4, 2017 Share Posted January 4, 2017 Don't worry. It wont damage you (unless you bump into something because your night vision is completely shot)! I have a 0.9 Baadar filter. Works a treat. Or, just up the Mag until brightness is acceptable. Paul Link to comment Share on other sites More sharing options...
John Posted January 4, 2017 Share Posted January 4, 2017 I don't use a filter even with my 12" dob but if you feel you would prefer to then the suggestions above are sound I find increasing the magnification reduces the apparent brightness. I don't tend to go for fainter DSO's with a bright moon in the sky. Link to comment Share on other sites More sharing options...
BRUN Posted January 4, 2017 Author Share Posted January 4, 2017 Does the size you choose need to match your EP size or do they fit somewhere else further in ? Link to comment Share on other sites More sharing options...
John Posted January 4, 2017 Share Posted January 4, 2017 21 minutes ago, BRUN said: Does the size you choose need to match your EP size or do they fit somewhere else further in ? They should match your eyepiece barrel size, either 1.25" or 2". Generally you screw filters onto the end of the eyepiece barrel. Link to comment Share on other sites More sharing options...
LukeSkywatcher Posted January 4, 2017 Share Posted January 4, 2017 You honestly do not need a Moon filter. As said above, the reflected Moonlight will not damage your eyes. It just takes a bit of getting used to. Its a person choice. Link to comment Share on other sites More sharing options...
BRUN Posted January 5, 2017 Author Share Posted January 5, 2017 Im not worried about it damaging my eyes, I know it wont do that, but i physically couldnt look at for longer than a few seconds without my eye streaming, same happened to my dad too. Sorry for the questions but ive no idea where they fit, if I bought a 2" filter, does that mean I could only use 2" eyepieces with it ? Im pretty sure my scope will take 2" or 1.25" eyepieces, it came with 2 x 1.25" which I was using last night, a 25mm and 10mm Link to comment Share on other sites More sharing options...
Waldemar Posted January 5, 2017 Share Posted January 5, 2017 This : http://www.teleskop-express.de/shop/product_info.php/language/en/products_id/7627 will give you the possibillity to adjust according the brightness (stage) of the moon. there are cheaper ones available as well, like Orion or other brands, but these are top. They arter vaialble in 1,25 and 2" size and fit into the back of your eyepiece or extension tube. can be used for imaging as well. Link to comment Share on other sites More sharing options...
Waldemar Posted January 5, 2017 Share Posted January 5, 2017 B.t.w. I don't agree with the comments 'it does not damage your eyes' The fact that it takes quite a while before your eyes are back to normal use should be a warning that they are over stimulated, which never is an okay thing for any part of our body. Link to comment Share on other sites More sharing options...
alanjgreen Posted January 5, 2017 Share Posted January 5, 2017 1 hour ago, BRUN said: Im not worried about it damaging my eyes, I know it wont do that, but i physically couldnt look at for longer than a few seconds without my eye streaming, same happened to my dad too. Sorry for the questions but ive no idea where they fit, if I bought a 2" filter, does that mean I could only use 2" eyepieces with it ? Im pretty sure my scope will take 2" or 1.25" eyepieces, it came with 2 x 1.25" which I was using last night, a 25mm and 10mm Burn, filters can be fitted to your eyepieces or your star diagonal (if your scope uses a diagonal? What scope is it?) if your scope does not use a diagonal, then you can only fit the filters to the eyepieces. therefore as you say, a 2" filter with a 2" thread will only screw into a 2" eyepiece. however, there are converters and adapters available that may help you, I use one, let me go and read the partnumber... otherwise eyepieces are available that have BOTH 1.25 and 2" threads, so this would be another option. Such as baader hyperion https://www.firstlightoptics.com/baader-planetarium/baader-hyperion-68-degree-eyepiece.html if you plan to view the moon at higher power then a 1.25 will fit the eyepieces you will likely be using. wider 2" eyepieces are less useful on a big target like the moon. My SCT scope uses a diagonal so I just fit the filters to that and that gives me flexibility to change eyepieces and the filter remains in place Link to comment Share on other sites More sharing options...
alanjgreen Posted January 5, 2017 Share Posted January 5, 2017 Brun, i use a baader adapter to convert my 1.25 eyepieces to 2", this enables me to fit them straight into my 2" focuser. As I have many 2" eyepieces this adapter allows me to make them all the same. Less messing about in the dark https://www.firstlightoptics.com/adapters/baader-low-profile-eyepiece-adapter-for-steeltrack.html The adapter has a thread to accept 2" filters The eBay link has pics from alternate angle... &source There are 2 fitment options. 1 the adapter is secured to the eyepiece with an Allen key and then remains permanently fitted. Thumbscrew is removed. 2 It also comes with a thumbscrew which you could use if you want to share a single adapter across several 1.25 eyepieces. This way you could leave the single 2" filter screwed into the adapter and just swap over eyepieces as needed Alan Link to comment Share on other sites More sharing options...
BRUN Posted January 5, 2017 Author Share Posted January 5, 2017 my scope is a Skywatcher 250px flextube, ive only just got it so dont really know much about it, its my first scope my thinking was that if i got a 2" filter, it can stay in place while swapping eyepieces, but i wasnt sure where they fitted Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.