roger jerome Posted September 17, 2022 Share Posted September 17, 2022 Good Afternoon ....still having issues trying to get rid of the blue fringing. I have an older version of Photoshop elements but no luck with it in this. Is there another way I could try? Thank you Roger Link to comment Share on other sites More sharing options...
newbie alert Posted September 18, 2022 Share Posted September 18, 2022 Hi Roger, is it a colour cam, if so do you use a ADC? What are you using to stack, regisax does a RGB align as it looks like you blue channel is out of alignment 1 Link to comment Share on other sites More sharing options...
knobby Posted September 18, 2022 Share Posted September 18, 2022 I was just going to say that 😃 Also, if the RGB alignment tool won't run, re start registax in admin mode. 1 Link to comment Share on other sites More sharing options...
roger jerome Posted September 18, 2022 Author Share Posted September 18, 2022 5 hours ago, newbie alert said: Hi Roger, is it a colour cam, if so do you use a ADC? What are you using to stack, regisax does a RGB align as it looks like you blue channel is out of alignment Thank you….it’s an asi120mc camera….no ADC. I did the wavelets and RGB align in Registax Cheers Roger Link to comment Share on other sites More sharing options...
Elp Posted September 18, 2022 Share Posted September 18, 2022 The way the moon is streaked suggests the target has moved significantly across the field of view in the set of frames you've tried to stack in my view, I could be wrong. Have you tried stacking a smaller amount of images? Also have you checked collimation of your scope? Is the image sharp when you view with an eyepiece? Link to comment Share on other sites More sharing options...
Dragon_Astro Posted September 18, 2022 Share Posted September 18, 2022 I had the same issue when I first started planetary, not so long ago. It’s not about focus or lack of adc, I put it down to a stacking issue. When you place your alignment points, try to avoid putting them too close to the edge. If there’s too much black sky within the box, the stacking software can get a bit confused. Link to comment Share on other sites More sharing options...
happy-kat Posted September 18, 2022 Share Posted September 18, 2022 Would processing the video first in PIPP sort out the alignment of the planet in each frame before going to Registax for stacking. Link to comment Share on other sites More sharing options...
newbie alert Posted September 18, 2022 Share Posted September 18, 2022 4 hours ago, roger jerome said: Thank you….it’s an asi120mc camera….no ADC. I did the wavelets and RGB align in Registax Cheers Roger Ok... Maybe a ADC might help..best of luck Link to comment Share on other sites More sharing options...
roger jerome Posted September 18, 2022 Author Share Posted September 18, 2022 2 hours ago, newbie alert said: Ok... Maybe a ADC might help..best of luck Thank you…..Jupiter seemed quite high up to me…..but perhaps that’s the next bit of kit Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now