Skywatcher AutoFocuser Screws

[bluenotetim]

Hi, Does anyone know where I could get 4 of the longer screws that come with the Skywatcher AutoFocuser? I recently purchased one of these but the 4 screws are missing, they are the four that hold the bracket onto the bottom of the focuser (surrounding the tensioner)

Thanks in advance,

Tim.

[Starlight 1]

Do you have model shop that do R/C car,  ect,  you fine something there that do the job ,

[BritAngler]

I found that the original screws fitted fine, have you tried them?

 

[beamer3.6m]

I thought you had to use the original screws.

I.e. take them out of the focuser and then put them through the bracket and back I to the focusser.

 

Hope that makes sense.

[Starlight 1]

There is 4 of the longer screws if fiting on a SW 250 as the plate is much thicker but only about 2mm longer.

[bluenotetim]

Hi, thanks for the replies. The originals seem to be a few mm's short. The pictures of the brand new auto focuser show 4 longer screws. I have no idea how to work out the size of such small screws?

Thanks Tim.