Jump to content

Banner.jpg.b89429c566825f6ab32bcafbada449c9.jpg

New Baader Hyperion Zoom Eyepiece Incoming!


Recommended Posts

The Baader Hyperion Zoom eyepiece has been unavailable for what feels like an eternity but we now have some good news for those with back-orders. The new upgraded Mk-III model (hence the delay) is set to arrive in 7-14 days :p

Unfortunately the price will probably increase by £10-15 but we shall upgrade all existing back-orders to the new model free-of-charge as a thank-you for your patience :D

A small quantity of the original model will also be available so if you wish to leave your order unchanged, perhaps to match an existing eyepiece, please let us know.

We shall update this thread with pix when the new eyepiece arrives.

HTH

Some manufacturer's sales spiel:

Altogether the following improvements were made to the new Mark III Hyperion Zoom:

- optical quality further enhanced by optimizing the curve geometry of inner lenses

- internal zoom actuators and lens group centring made more rigid while allowing less play

- thermal response of mechanical system further reduced with thermally matched metal components to allow use under even

harsher environmental conditions

- greaseless movement of internal zoom lens group

- clickstop mechanics improved with greater smoothness and almost noiseless operation

- focal zoom positions optimized and refocusing requirements minimized

- dust protection enhanced throughout and front (telescope side) lens-group actuator sealed

- eyelens-group made watertight to seal eyepiece from rain during terrestrial operation

- large eyerest rubber cover redone to make the eyerest scratchproof for eyeglasses

- eyerest height adjustment made greaseless with step-curved click rest - as found on high quality binoculars

- eyerest assembly is now fully detachable for creating "nose space"

- small Hyperion rubber eyecup added to fit M 43 thread

- camera adapter thread changed from SP 54 to M43(SONY) for a variety of afocal camera adaptations

- accepts photo-adapter M43/T-2 (M42x0.75 /item #2958080) for easy and rigid adaptation of various DSLR-T-Mount rings

Above features add to the known excellent features of the Hyperion Zoom:

- HQ-optics providing an ultra sharp undistorted flat field across the full field of view at each magnification

- excellent BBAR (Phantom Group) coatings throughout - for a brilliant view field - brighter than many competing units

- designed to accept adaptation onto various Digital and DSLR-cameras for use as a high quality projection optic with

variable magnification

- equipped with 1 1/4" and 2" nosepieces

- adapter included to thread onto Carl Zeiss Diascope spotting scopes (M45)

- adapter included to thread onto most Celestron and Synta/Skywatcher spotting scopes (M35)

- reaches focus on all above spotting scopes even for very shortsighted observers

Link to comment
Share on other sites

Can you put me down for a bottle of wonder fluid please Steve.

Will do, we'll mention it here when they arrive as a lot of members have backorders.

Any news on the Hyperion Stop rings yet Steve?, thanks.

We are hopeful for tomorrow/Wed. Fingers crossed!

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue. By using this site, you agree to our Terms of Use.