over riding skyscan

[tim r]

Is it possible to centre a object manually after 2 or 3 star setup (if its no quite central)as you can with the meade auto star by pressing enter till you hear a beep and then again to lock in new position to make the location more accurate thanks.

[blinky]

You can just use the hand control direction buttons, or am I missing something?

[Ant]

Centreing the object with the hand controller buttons will only work up to a point.

If it's over a certain amount of degree's "out" then you get an error.

I assume that loosening the axis locks and manually altering the position will much up the goto?

Cheers

Ant

[beamish]

You do get the error message if you're aligning as Ant has described, but otherwise you can move it where you like with the H/set

[Parallax]

Pointing Accuracy Enhancement (PAE).

Centre the object using the handcontoller, pres Esc for 2 seconds then press Enter.

Steve

[tim r]

I think I was mostly misunderstood (very badly explained on my part)I think the last answer was the one I was after thanks for all your reponses..