Jump to content

NLCbanner2024.jpg.2478be509670e60c2d6efd04834b8b47.jpg

Ok your right


Recommended Posts

Hi I think the mount was twisted this telescope was abused even tho it was sold to me as never used . It would not stay mounted tight just keeps moving and was about 4degs out , this is why I replaced it , as I am new at this i am going to find it hard enough to line up on stars without the added problem of the sight out 

Link to comment
Share on other sites

21 hours ago, Neil H said:

Hi I think the mount was twisted this telescope was abused even tho it was sold to me as never used . It would not stay mounted tight just keeps moving and was about 4degs out , this is why I replaced it , as I am new at this i am going to find it hard enough to line up on stars without the added problem of the sight out 

Hi Neil,

My point being only that the original finder-scope is not rubbish, after all.  Still...

I took the one off of my "PowerSeeker" 127/1000 and installed a Vixen-style finder-base...

584742568_finderupgrade.jpg.2a45008fd0911b1a0d6da96fe26ba98e.jpg

Now I can add any type of finder under the Sun, swapping them back and forth.  I used the original holes in the tube to mount the base...

780194838_finderbase1.jpg.7dd458c9de906f50503e93d44e5470d4.jpg

The base, there on the left, is a common and secure way to mount a finder.  It does require different screws, nuts, and perhaps washers, to install...

2103544854_finderbase4b.jpg.b5771be0a4fdfab41855b93f3d0176e9.jpg

I use stainless-steel screws, with the rest being of zinc-plated, common steel.  The screws may have to be cut down in length so as not to have the tips protruding into the main mirror's light-path.; simple measurements and a hacksaw are all it takes...

972281119_finderupgrade2.jpg.0a9cd6d95d7a6e84b9c18415ee26dbc3.jpg

To be on the safe side, I like to have the tips of the screws nigh flush to the outside surfaces of the nuts.  I then matte-blacken only the parts on the inside of the tube.  You don't want anything reflective or shiny inside the tube, save for the two mirrors.

I have a Meade 114/900, and virtually identical to your Celestron...

kit4b.jpg.72819bd9cae9818e8d2286cb7b7fa88b.jpg

114/900 Newtonians have been round and quite popular for decades.  The 900mm focal-length is ideal for working with the 4mm-to-40mm range of eyepieces, and with the ability to observe practically everything in the sky satisfactorily.

I've only observed with that Meade once, but from that experience I do know this: you and yours will have a wonderful time.

Cheers,

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue. By using this site, you agree to our Terms of Use.