Wirral man Posted May 21, 2018 Share Posted May 21, 2018 hi i have downloaded apt software and am just trying to play around with things 1st but i cant connect my mount/scope or guide camera to the programme im using usb serial port connection from the handset to the pc or do i need a different cable? Link to comment Share on other sites More sharing options...
wetwalker Posted May 21, 2018 Share Posted May 21, 2018 Hi, I use a usb serial connection on my hand controller to pc and Ascom drivers to run APT and my celestron AVX. Ian Link to comment Share on other sites More sharing options...
michaelmorris Posted May 21, 2018 Share Posted May 21, 2018 What mount and camera are you trying to connect? The guide camera is connected to your guiding software (typically PHD2 https://openphdguiding.org/ ) . The guiding software then connects to APT, although this is only needed if you are going to be dithering. https://ideiki.com/astro/usersguide/dithering_and_guiding.htm Link to comment Share on other sites More sharing options...
Wirral man Posted May 21, 2018 Author Share Posted May 21, 2018 trying to control my heq5 via apt downloaded skywatcher ascom and updated the handcontroller but cant get it to slew ? Link to comment Share on other sites More sharing options...
Pompey Monkey Posted May 21, 2018 Share Posted May 21, 2018 Is it parked? Link to comment Share on other sites More sharing options...
Wirral man Posted May 21, 2018 Author Share Posted May 21, 2018 think i will just get a eqmod cable Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.