JemC Posted October 2, 2016 Share Posted October 2, 2016 Hi Wondering if someone could throw some light on my little problem, Standard Heq5 with syncan goto kit installed, polar scope reticule centred (took me about 2 hours) 130pd-s with canon 600d, balanced and 3 star alignment, goto targets it puts them in view just slightly of centre, my problem is i cannot seem to get longer than 1 minute before trailing starts ?? am currently getting 3 mins with Eq3-2 with just RA motor, have i missed something or have i done something wrong?? any advice would be really appreciated, Regards Link to comment Share on other sites More sharing options...
Skipper Billy Posted October 2, 2016 Share Posted October 2, 2016 How are you doing your polar alignment? Link to comment Share on other sites More sharing options...
JemC Posted October 2, 2016 Author Share Posted October 2, 2016 54 minutes ago, Skipper Billy said: How are you doing your polar alignment just by eyeball through the polar scope, then adjust as needed, it is pier mounted, get the hour angle first from polar finder, your going to tell me there is a better way i can feel it thanks for your reply Link to comment Share on other sites More sharing options...
hjw Posted October 3, 2016 Share Posted October 3, 2016 Hi JemC, try the polar alignment in synscan. 1. Do a 2-star alignment 2. Do the polar alignment (the menu option after the 3-star alignment) 3. Follow the prompts on the handset. Repeat steps 1-2-3 until your polar alignment is within 30arcsec in both directions. Done! Good luck! HJ Link to comment Share on other sites More sharing options...
Skipper Billy Posted October 3, 2016 Share Posted October 3, 2016 As above ! Your issue does sound like a polar alignment problem. Good luck - let us know how you get on. Link to comment Share on other sites More sharing options...
JemC Posted October 3, 2016 Author Share Posted October 3, 2016 25 minutes ago, Skipper Billy said: Good luck - let us know how you get on. i certainly will, thanks Link to comment Share on other sites More sharing options...
JemC Posted October 3, 2016 Author Share Posted October 3, 2016 3 hours ago, hjw said: Hi JemC, try the polar alignment in synscan. time to dig the manual out, will give this a go and let you know how i get on Thanks Link to comment Share on other sites More sharing options...
Waldemar Posted October 4, 2016 Share Posted October 4, 2016 No idea if you want to invest that much, but the PoleMaster does a great job for PA You will need guiding as well to get longer subs without trailing. Could use your Logitech webcam for that with a guider scope or Off Axis Guiding Link to comment Share on other sites More sharing options...
dph1nm Posted October 4, 2016 Share Posted October 4, 2016 On 02/10/2016 at 21:33, JemC said: my problem is i cannot seem to get longer than 1 minute before trailing starts That's about right for a typical ungiuded HEQ5 - the periodic error gets you after that. NigelM Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.