seanpius Posted October 20, 2015 Share Posted October 20, 2015 Hi all,can anyone tell me why this o111 image of m42 turns out like this in pixinsight,it is a 300sec exposure,what am i doing wrong.. Link to comment Share on other sites More sharing options...
pipnina Posted October 20, 2015 Share Posted October 20, 2015 Is this raw from the camera or has it been stacked/processed in any way?If this is raw, then it looks like reflections, if it's stacked, try reverting to default settings and make sure the file output is valid if using DSS and try again. Link to comment Share on other sites More sharing options...
Davey-T Posted October 20, 2015 Share Posted October 20, 2015 Bit more info would be good, camera / scope ?Dave Link to comment Share on other sites More sharing options...
seanpius Posted October 20, 2015 Author Share Posted October 20, 2015 Hi Dave it is 10 x300sec exposures stacked in pixinsight,scope is ed80t camera g28300 mono, temp-10 Link to comment Share on other sites More sharing options...
Davey-T Posted October 20, 2015 Share Posted October 20, 2015 Never used PI so may not be much help, did you use calibration frames ? does a single sub look normal before stacking ?Dave Link to comment Share on other sites More sharing options...
seanpius Posted October 20, 2015 Author Share Posted October 20, 2015 single subs are normal,might give it a go in DSS to see what happens. Link to comment Share on other sites More sharing options...
MattJenko Posted October 29, 2015 Share Posted October 29, 2015 Did you get this sorted? That looks like a complete misapplication of flats to me. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.