msh1 Posted March 8, 2015 Share Posted March 8, 2015 hi all in the pst eyepiece holder there is a filter i assume its a blocking filter, does anyone know what the filter is in the extension piece, I'm trying to get full disc when imaging and doing away with the extension should give me the back focus i need to get full disc . I'm tempted to try it with an old modified webcam i got mark Link to comment Share on other sites More sharing options...
JB80 Posted March 8, 2015 Share Posted March 8, 2015 There are two filters in the eyepiece holder, one is a blocking filter and the other is an ITF/blueglass filter. You need both of them really. Link to comment Share on other sites More sharing options...
msh1 Posted March 8, 2015 Author Share Posted March 8, 2015 thanks jarrod what does the blue glass filter do ??mark Link to comment Share on other sites More sharing options...
JB80 Posted March 8, 2015 Share Posted March 8, 2015 I believe it blocks out Infra Red coming into the eyepiece, amongst other things.. Link to comment Share on other sites More sharing options...
michael.h.f.wilkinson Posted March 8, 2015 Share Posted March 8, 2015 With a small chip like a webcam, you can get full disk with a Barlow by making mosaics. Link to comment Share on other sites More sharing options...
msh1 Posted March 8, 2015 Author Share Posted March 8, 2015 what i was hoping to achieve is to get full disc images of the eclipse in the pst Link to comment Share on other sites More sharing options...
keithatrochdale Posted March 8, 2015 Share Posted March 8, 2015 It is possible to turn some metal off the eyepiece holder which should give you the backfocus you need if you use a short nosepiece on the camera. Link to comment Share on other sites More sharing options...
msh1 Posted March 8, 2015 Author Share Posted March 8, 2015 It is possible to turn some metal off the eyepiece holder which should give you the backfocus you need if you use a short nosepiece on the camera.i think thats what I'm going to do not sure how much to cut off . 10mm ?? Link to comment Share on other sites More sharing options...
msh1 Posted March 9, 2015 Author Share Posted March 9, 2015 mr hacksaw met the pst today i chopped 10mm of the eyepiece holder so hopefully i can get full disc just need a clear day to test Link to comment Share on other sites More sharing options...
Peter Drew Posted March 9, 2015 Share Posted March 9, 2015 How are you holding the eyepiece in now?, I could only remove 3mm from mine before cutting into the threaded hole for the locking screw. Link to comment Share on other sites More sharing options...
msh1 Posted March 10, 2015 Author Share Posted March 10, 2015 i just drilled and tapped a new threadmark Link to comment Share on other sites More sharing options...
Peter Drew Posted March 10, 2015 Share Posted March 10, 2015 Fair enough!. Link to comment Share on other sites More sharing options...
keithatrochdale Posted March 11, 2015 Share Posted March 11, 2015 But have you solved the original problem? Link to comment Share on other sites More sharing options...
msh1 Posted March 12, 2015 Author Share Posted March 12, 2015 But have you solved the original problem?not had chance to test it out yet ,damn cloud, if it doesn't work I'm going to bite the bullet and get a lunt 60 which i will end up buying anyway lolmark Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.