Jupiter 31-12-14 Better seeing

[ReticMikee]

No Jetstream over the UK but the seeing was only slightly better to start off with but improved as the night went on

First RGB run

IR + RGB

RGB

IR + RGB

RGB

IR + RGB

RGB

IR + RGB

[knobby]

Cracking ! Really nice

[bgd]

Amazing! May I ask what was your setup?

Sent from my SM-N910T using Tapatalk

[michael.h.f.wilkinson]

Very nice set of images

[Freddie]

Some nice shots. There is a bit of misalignment of the RGB files on some, what are you using to combine the RGBs?

[Pete Presland]

Nice set of images, the last is probably my favourite of lot. some real nice detail showing, but there does seem to be slight misalignment between the channels.

[ReticMikee]

Amazing! May I ask what was your setup?

Sent from my SM-N910T using Tapatalk

Thanks

Im using a C11 + ASI 120mm-s 

[ReticMikee]

Some nice shots. There is a bit of misalignment of the RGB files on some, what are you using to combine the RGBs?

Thanks Freddie

is that why there is the blue fringe on the limb ?

Im using winjupos to combine the RGB

[Freddie]

Hi,

Yes, particularly on the last couple you can see a red and blue line on the limb. This is because the RGB frames are not aligned correctly. A quick way (not the best) to sort this is to put the pic into R6 and do an RGB align. The proper way to sort the issue is to go back to the individual files in WinJupos and do the adjustment tab again. If you tick the LD compensation box before doing the alignment it will help to position the ring perfectly. Don't forget to un tick the box before saving the position file. When combining the RGB files, set the LD value to .90 for each file before combining. Hope that helps.

[ReticMikee]

Hi,

Yes, particularly on the last couple you can see a red and blue line on the limb. This is because the RGB frames are not aligned correctly. A quick way (not the best) to sort this is to put the pic into R6 and do an RGB align. The proper way to sort the issue is to go back to the individual files in WinJupos and do the adjustment tab again. If you tick the LD compensation box before doing the alignment it will help to position the ring perfectly. Don't forget to un tick the box before saving the position file. When combining the RGB files, set the LD value to .90 for each file before combining. Hope that helps.

Thanks Freddie for the advice much appreciated :-)