astrotortilla problem

[Russe]

Hi guys,

I'm using the HEQ5 Pro, APT, EQMOD.

With Astrotortilla I either bring a star into view for alignmaster PA or I use it to GOTO image. Now I've noticed a couple of times, that if astrotortilla reslews to a target it immediately takes the next picture, without letting the mount time to settle down. This causes a blurred picture, which causes AT to fail...

Where can I change the settle down time?????

Thanks for your help.

[Russe]

I've found this, but I can't make heads or tails of it.

[cthorpey]

me either but looking on the forum someone has put in a feature request. will be even happier with AT when they put it in.

[Dave_D]

i have the same 'problem'. a user definable pause would be a great addition to AT

[Hawkeye]

After you connect the mount, click on the settings button just below and the pause after slew setting is there...
Or set APT to have a delay before starting a plan and this will work too..

[Thalestris24]

After you connect the mount, click on the settings button just below and the pause after slew setting is there...

Or set APT to have a delay before starting a plan and this will work too..

Ahh wish I'd known that before! I was having terrible trouble with my 1100d... Seems better with the qhy8l though. Still, I'll try adjusting the 'slew settle' rate for next time (whenever that will be!). I'm sure I didn't use to have the problem - it's something that's crept in. Possibly since I upgraded to the 64bit version. Oh well.

Cheers

Louise