lhuchison Posted October 8, 2012 Share Posted October 8, 2012 i,m just fitting a new crayford low profile focuser to my 200p newt.It has a shorter draw tube, being low profile, the holes line up perfectly but there is a gap of a few millimetres between focuser and OTAis this a problem? I suppose i,m thinking about the truss tube designs which are open to the elements? So should i fit a gasket?any advice gratefully received. Link to comment Share on other sites More sharing options...
Steve Ward Posted October 8, 2012 Share Posted October 8, 2012 I think they're designed to fit the 150 , 200 , 250 and 300 tubes so there will be an obvious difference in radii .Nothing to worry about as the gap can't let light into the focuser tube.Steve. Link to comment Share on other sites More sharing options...
LukeSkywatcher Posted October 8, 2012 Share Posted October 8, 2012 I think i have read about others having the same issue. From what i remember its not a problem. Link to comment Share on other sites More sharing options...
Bizibilder Posted October 8, 2012 Share Posted October 8, 2012 Either leave the gaps or fill them with a piece of soft foam plastic. Link to comment Share on other sites More sharing options...
steppenwolf Posted October 8, 2012 Share Posted October 8, 2012 I had this issue and decided to fill the gap with black foam just for completeness. Link to comment Share on other sites More sharing options...
lhuchison Posted October 9, 2012 Author Share Posted October 9, 2012 thank you for your replies. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.