Starlight 1 Posted February 20, 2012 Share Posted February 20, 2012 I put the post in here so if you think it will still make a cam I pull it apart.I was bining a lot of old computer parts and out of the box come a Philips tocam 750k pro look like a egg. I still working on xp .Do I turn in to a astro cam it did flash to a 900nc flirmware and works ok on windows 7 or is it just to old for the job it got to be 10 years old. Link to comment Share on other sites More sharing options...
Gina Posted February 20, 2012 Share Posted February 20, 2012 Unless I'm mistaken, that's one of the main models that is converted for AP. Link to comment Share on other sites More sharing options...
beamish Posted February 20, 2012 Share Posted February 20, 2012 I believe you can flash it an SPC900 Link to comment Share on other sites More sharing options...
Cornelius Varley Posted February 20, 2012 Share Posted February 20, 2012 WEB-CAMERAS. Did you know that the SPC880 is recognised as a PCVC750K Toucam Pro 3D in XP ? It will work in XP, the only reason to flash the firmware is to use it in Vista and Win7. The exposure control for the 900 is better too.Peter Link to comment Share on other sites More sharing options...
Starlight 1 Posted February 20, 2012 Author Share Posted February 20, 2012 That good I start work on it , pics on tuesday I have got a nice little box for it.it flash to a spc900nc ok. Link to comment Share on other sites More sharing options...
Gina Posted February 20, 2012 Share Posted February 20, 2012 Good luck Link to comment Share on other sites More sharing options...
Starlight 1 Posted February 21, 2012 Author Share Posted February 21, 2012 Just a bit of paint work to do.One toucam750k , one old 10mm lens , one data box , one pc fan,one hour to make. Link to comment Share on other sites More sharing options...
Starlight 1 Posted February 21, 2012 Author Share Posted February 21, 2012 Photos Link to comment Share on other sites More sharing options...
badgers Posted February 21, 2012 Share Posted February 21, 2012 That's a lovely conversion! Link to comment Share on other sites More sharing options...
Starlight 1 Posted February 21, 2012 Author Share Posted February 21, 2012 Thank you Badgers,Do I fit the fan to suck or blow it got a slot in the top so the air can go all the way round the main board front and back. Link to comment Share on other sites More sharing options...
Starlight 1 Posted February 23, 2012 Author Share Posted February 23, 2012 This is the last bit to making the two filter wheel ,flip mirror web cam all in one box I put more photo in when it all in the box.When you flip the mirror to view two led come on in the front panel so you can see the filters seting. Link to comment Share on other sites More sharing options...
Gina Posted February 23, 2012 Share Posted February 23, 2012 WOW! That looks complicated Looks well engineered though Link to comment Share on other sites More sharing options...
Starlight 1 Posted February 23, 2012 Author Share Posted February 23, 2012 Hi Gina it much like your flip mirror you are doing ,all this one is a lot of mirrors sending it round a box the long tube at the back is a barlow len so the lens will be uses on the outside box, the webcan will go on the round part and the filter end go to the telescope. Link to comment Share on other sites More sharing options...
Starlight 1 Posted February 23, 2012 Author Share Posted February 23, 2012 I forgot to put in its got one more wheel to put in, Wheel 3 will be use for star test and to cut down the amount of sky I put a photo in later so you can how it works. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.