Jump to content

NLCbanner2024.jpg.2478be509670e60c2d6efd04834b8b47.jpg

Jiggy 67

Members
  • Posts

    1,732
  • Joined

  • Last visited

Posts posted by Jiggy 67

  1. I observe under similar skies with an 8” reflector and can see plenty of planetary nebulae and emission nebulae, reflection nebulae can be more challenging. Filters can assist and I wouldn’t be without them but, even under these skies, some objects are better without, it really depends on the object, it’s magnitude and sky conditions at the time. Be assured, your scope will enable you to view thousands of objects under your skies and I would definitely invest in filters, I have Astronomik UHC, O111, Baader Moon and Skyglow and contrast booster. With or without filters a lot of objects take patience, good dark adaptation and trial and error 

    • Like 1
    • Thanks 1
  2. 4 hours ago, wookie1965 said:

    I have not had a chance to try my Tal or my 5" on it yet my light pollution has got worse I have a UHC filter which I can try when I see it to darken the background.

    I had a great viewing of it in the 8" but that was 2.5 years ago I am restricted to the area I can view I can see East and SE limited South is out the question as is west North is not bad but some nights I cannot see all the stars in Ursa Major as the house is in the way.

    To see M1 I need the weather when it is in the East or slightly SE after that I have no chance.

    This Lamp is directly south.

    lamp2.jpg

    You send that photo with the fact that you’re an amateur astronomer to the council, they may do something about that for you 

  3. I find it hard to believe your collimation being slightly out (which it doesn’t really appear to have been) would cause the issue you describe, much more likely to be conditions outside 

    I’ve never noticed weather conditions affecting collimation but, then again, I’ve never checked immediately after a session, I don’t think I want to either, there’s enough to obsess about as it is!! 🤣

    • Like 1
  4. The zoom you are using generally has good reviews, you are probably ruining it with the stock Celestron Barlow, I would continue using the zoom without the Barlow. The Barlow isn’t really needed anyway as you have all magnifications covered within the zoom . You don’t really want to Barlow the 7mm setting as that would probably be too much 

    • Like 1
  5. 2 hours ago, Second Time Around said:

    We're having a new lawn laid later in the year. In the meantime I've had a single slab laid to put my scopes on.

    I had thought about additional slabs to walk on, but was concerned they'd heat up during the day and affect the seeing at night as they cool down.

    Any thoughts?

    My experience is that it is not the mount that causes the problem with the lawn, it’s the constant walking around it that churns up the lawn when it’s wet.

    As this thread has been resurrected, thought I’d provide an update......

    I fitted 6 lawn protection mats about the time this thread began. They worked like a dream through the first winter and Summer. My big mistake was not taking them up in the summer. This failure has resulted in them becoming meshed with the lawn, so much so that when I tried taking one up recently, it ripped the lawn up with it so I have had to leave them down and they are no longer visible. They still provide some protection but not as much as the first season.

    My advice to anyone using lawn protection mats would be to take them up every Spring and allow the lawn to recover over the summer 

    • Like 1
  6. On 04/01/2021 at 14:55, StarGazerRandomGuy said:

    When it's turned on the inside of the scope is red.

    Have you got the polar scope illumination turned up too high?? Sounds like you have it high which will turn the inside red and stop you seeing Polaris, you may be looking right at it and can’t see it.

    You can adjust brightness in the utilities menu of the handset, turn it down to a comfortable brightness 

  7. 43 minutes ago, StarGazerRandomGuy said:

    I'm trying to polar align but I can't seem to get polaris in my polar scope, I can't see any stars at all through my polar scope, I'm in a light polluted area, it's clear sky as of right now me typing this. Any suggestions?

    As Geoff said above

    25 minutes ago, Cosmic Geoff said:

    You should be able to see Polaris through the polar scope in those conditions, so long as you orient the DEC axis to clear the view path...  The field of view is fairly small, though. From your lat/long you appear to be in the USA. 

    Check you have entered all the data in the right format.  The lat/long may require leading zeroes.  And don't enter the decimal format you quotre above.

    The view through the polar scope will be blocked unless you move the dec axis to make the main scope horizontal (just in case you haven't realised that)

    The area around Polaris is quite sparse of visible stars, so if Polaris is just outside your fov, it is not surprising that you don't see any stars. It's just a case of trial and error sometimes, kneel down behind the RA axis and polar scope, get your knees dirty if you have to, and visually align the axis with Polaris without looking through the scope at first, eventually you will get it.

    I also find that the altitude scale isn't particularly accurate so be willing to change the altitude of the mount aswel.

    There are apps that assist. I use one called PS Align Pro which has a daytime PA routine. It is not exact but generally gets Polaris in my polar scope fov, ready for fine tuning at night.

    Don't give up, no-one ever said this hobby was easy!!  😀

    • Like 1
×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue. By using this site, you agree to our Terms of Use.