EQ5 Dual Motor Kit LED

[TopHouse]

There's nothing in the manual about this one, it happened the other night and i don't know what it was. The LED in the middle of the 4 buttons is normally green, then when buttons are pressed it goes red. BUT, what is it doing if the led is flashing green?

[barkis]

Perhaps it is an indication of a power supply problem.

What is the power to the mount?. Batteries, or PSU?

Ron.

[Merlin66]

Like Ron, I think it's telling you the 6V supply voltage is low...

Your batteries may be going flat in the cold....

[Rusty Strings]

I agree with power problems. I get the flashing green led as the connector from my power supply is not the best of fits.

John

[lunator]

HI TP

Yep it's a power warning.

usually mine flashes occasionally when the connection gets touchy due to the temp.

Once it starts flashing frequently it means that the batteries will give out soon.

Cheers

Ian

[John]

I have that setup - it's a signal that the batteries are running down.

John

[TopHouse]

Thanks for the replies, strange thing is, it was flashing at about 30 minutes into the session, then it stopped and was fine, maybe an intermittent connection problem at the power jack, that connection aint the best is it lol