scotttumsh Posted February 20 Share Posted February 20 Hope im not tempting the ugly grey clouds in! 7 Link to comment Share on other sites More sharing options...
Saganite Posted February 20 Share Posted February 20 (edited) No you are not, they are already here in abundance.....🙂 Lovely set up BTW. Edited February 20 by Saganite 2 Link to comment Share on other sites More sharing options...
jjohnson3803 Posted February 20 Share Posted February 20 19 minutes ago, scotttumsh said: Hope im not tempting the ugly grey clouds in! Lovely looking device you have there. 1 Link to comment Share on other sites More sharing options...
bosun21 Posted February 20 Share Posted February 20 Lovely little setup. Do you have the pier extension fitted on a tripod? Link to comment Share on other sites More sharing options...
scotttumsh Posted February 20 Author Share Posted February 20 1 hour ago, Saganite said: No you are not, they are already here in abundance.....🙂 Lovely set up BTW. Thanks, still learning with the mount but great fun between the damn clouds! Link to comment Share on other sites More sharing options...
scotttumsh Posted February 20 Author Share Posted February 20 2 minutes ago, bosun21 said: Lovely little setup. Do you have the pier extension fitted on a tripod? Yes the pier is fitted to the heavy steel tripod 1.75” legs. So very solid 1 Link to comment Share on other sites More sharing options...
scotttumsh Posted February 20 Author Share Posted February 20 1 hour ago, Saganite said: No you are not, they are already here in abundance.....🙂 Lovely set up BTW. Link to comment Share on other sites More sharing options...
scotttumsh Posted February 20 Author Share Posted February 20 1 hour ago, jjohnson3803 said: Lovely looking device you have there. ye its a great little setup. though still trying to get used to the goto set up Link to comment Share on other sites More sharing options...
LaurenceT Posted February 20 Share Posted February 20 (edited) Love the mount but then I would do 😀. That looks to be quite a heavy load on the mount but of course appearances can be deceptive, how much does it weigh? I'm looking forward to reading how you get on with this and seeing some of your results. Edit: just seen what the scope is so it looks like it's well within limits. Edited February 20 by LaurenceT Link to comment Share on other sites More sharing options...
TiffsAndAstro Posted March 24 Share Posted March 24 On 20/02/2024 at 17:52, scotttumsh said: Hope im not tempting the ugly grey clouds in! Lol of course you are. Just me replying to your post will jinx my clouds for me Link to comment Share on other sites More sharing options...
TiffsAndAstro Posted March 24 Share Posted March 24 On 20/02/2024 at 20:03, scotttumsh said: ye its a great little setup. though still trying to get used to the goto set up Give Nina a ago If I can do 3ppa and plate solving after 30 minutes of first using Nina anyone can 1 Link to comment Share on other sites More sharing options...
scotttumsh Posted March 26 Author Share Posted March 26 On 24/03/2024 at 15:29, TiffsAndAstro said: Give Nina a ago If I can do 3ppa and plate solving after 30 minutes of first using Nina anyone can thanks i may do that although im tempted to go down the Asi Air route and usw that. 1 Link to comment Share on other sites More sharing options...
TiffsAndAstro Posted March 26 Share Posted March 26 (edited) 4 minutes ago, scotttumsh said: thanks i may do that although im tempted to go down the Asi Air route and usw that. possibly me too, so ill probably get zwo main and guide camera just in case. nina seems pretty good for me so far though. just noticed you have a swsa gti on your list of stuff. have you used it much and what do you think? is your alt bolt like mine with a sort of dead spot? if you move it up or down too far then go other direction, there is some slack? Edited March 26 by TiffsAndAstro Link to comment Share on other sites More sharing options...
scotttumsh Posted March 26 Author Share Posted March 26 1 minute ago, TiffsAndAstro said: possibly me too, so ill probably get zwo main and guide camera just in case. nina seems pretty good for me so far though. Ye not that keen on the synscan app, maybe its just me but i find it a bit stop start. also it plays up when im using the snap port for camera control. 1 Link to comment Share on other sites More sharing options...
TiffsAndAstro Posted March 26 Share Posted March 26 (edited) 3 hours ago, scotttumsh said: Ye not that keen on the synscan app, maybe its just me but i find it a bit stop start. also it plays up when im using the snap port for camera control. Yeah lol I also got the snap cable and camera control was clunky. I installed synscan on windows and run it to connect to my GTi via usb cable, the run Nina. With plate solving working reliably, it's ace. Now I just need clear skies to actually do stuff Id say asiair is better for cable management though a mini pc running Nina would also help compared to the rat's nest I have, using a laptop Edited March 26 by TiffsAndAstro Link to comment Share on other sites More sharing options...
scotttumsh Posted March 26 Author Share Posted March 26 2 hours ago, TiffsAndAstro said: Yeah lol I also got the snap cable and camera control was clunky. I installed synscan on windows and run it to connect to my GTi via usb cable, the run Nina. With plate solving working reliably, it's ace. Now I just need clear skies to actually do stuff Id say asiair is better for cable management though a mini pc running Nina would also help compared to the rat's nest I have, using a laptop i may give Nina a go in the short term. i will look into it later, thanks for the info. clear skies! eventually 1 Link to comment Share on other sites More sharing options...
TiffsAndAstro Posted March 26 Share Posted March 26 1 hour ago, scotttumsh said: i may give Nina a go in the short term. i will look into it later, thanks for the info. clear skies! eventually It's a free easy way to dip your toe. I'm no expert by any means but even i could set up 3ppa and plate solving very easily Link to comment Share on other sites More sharing options...
scotttumsh Posted March 26 Author Share Posted March 26 2 hours ago, TiffsAndAstro said: It's a free easy way to dip your toe. I'm no expert by any means but even i could set up 3ppa and plate solving very easily I have been looking, do you still have to do star alignment or does the plate solving take away that process? 1 Link to comment Share on other sites More sharing options...
TiffsAndAstro Posted March 26 Share Posted March 26 (edited) 1 hour ago, scotttumsh said: I have been looking, do you still have to do star alignment or does the plate solving take away that process? Don't even know how I would star align in Nina. I just use the atlas to find my target and press slew. The I just add that target as a legacy sequence, change iso and exposure time to my liking and hit play. I would advise connecting everything up in daylight as there will be some niggles with drivers and setting up plate solving, but lots of YouTube's on that. It's really pretty simple with help from here and YouTube Edited March 26 by TiffsAndAstro Star, you are you are Link to comment Share on other sites More sharing options...
scotttumsh Posted March 27 Author Share Posted March 27 10 hours ago, TiffsAndAstro said: Don't even know how I would star align in Nina. I just use the atlas to find my target and press slew. The I just add that target as a legacy sequence, change iso and exposure time to my liking and hit play. I would advise connecting everything up in daylight as there will be some niggles with drivers and setting up plate solving, but lots of YouTube's on that. It's really pretty simple with help from here and YouTube Thank you for that, im dowloading it now! even though im rubbish with tech. wish me luck😀 1 Link to comment Share on other sites More sharing options...
TiffsAndAstro Posted March 27 Share Posted March 27 1 hour ago, scotttumsh said: Thank you for that, im dowloading it now! even though im rubbish with tech. wish me luck😀 Ask if any problems I might be able to help with the basics. Link to comment Share on other sites More sharing options...
scotttumsh Posted March 27 Author Share Posted March 27 1 hour ago, TiffsAndAstro said: Ask if any problems I might be able to help with the basics. got everything dowloaded but it wont connect to the mount, ascom and skywatcher synscan app downloaded. just keeps saying unable to connect to synscan app driver Link to comment Share on other sites More sharing options...
TiffsAndAstro Posted March 27 Share Posted March 27 (edited) 1 hour ago, scotttumsh said: got everything dowloaded but it wont connect to the mount, ascom and skywatcher synscan app downloaded. just keeps saying unable to connect to synscan app driver i think this should work: connect usb from pc to mount run synscan app on pc and use it to connect to mount. you might have to change the setting in the synscan app on your pc to use usb/serial connection. check its connected by seeing if it slews via the the direction controls in the app on your pc. run nina and tell nina to connect to the correct mount (telescope) in the drop down box that should be it. this video was pretty helpful: sadly you'll need to watch it upside down as he sounds Australian Edited March 27 by TiffsAndAstro Link to comment Share on other sites More sharing options...
scotttumsh Posted March 27 Author Share Posted March 27 56 minutes ago, TiffsAndAstro said: i think this should work: connect usb from pc to mount run synscan app on pc and use it to connect to mount. you might have to change the setting in the synscan app on your pc to use usb/serial connection. check its connected by seeing if it slews via the the direction controls in the app on your pc. run nina and tell nina to connect to the correct mount (telescope) in the drop down box that should be it. this video was pretty helpful: sadly you'll need to watch it upside down as he sounds Australian yep that was one of the videos i had found, think i have cracked it. well ivgot it moving using Nina at least! thanks for your help. very much appreciated😀 1 Link to comment Share on other sites More sharing options...
AstroMuni Posted March 27 Share Posted March 27 17 hours ago, scotttumsh said: do you still have to do star alignment or does the plate solving take away that process? If you are plate solving you dont need to do the 2/3 star alignment. With every platesolve, the mount model will be updated to make it more accurate. 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now