barrie greenwood Posted October 2, 2022 Share Posted October 2, 2022 (edited) Hi guys. Ok ive had my nikon dslr modded to full spectrum. So now I get red a lot of red even after processing its red with not much else in colour is this normal . I'm being told that I now need to put an ir cut filter in but that seems like a waste of time since I had it taken out for the mod in the first place I'm a bit confused so any advice is welcomed this is the kind of thing I'm getting is this what's to be expected ? Best regards and thanks as always Edited October 2, 2022 by barrie greenwood Link to comment Share on other sites More sharing options...
sharkmelley Posted October 2, 2022 Share Posted October 2, 2022 Yes, you should use an IR cut filter (or IR/UV cut filter) designed for astronomical imaging. They still allow all the H-alpha to reach the sensor, which is the point of the modification. Link to comment Share on other sites More sharing options...
barrie greenwood Posted October 2, 2022 Author Share Posted October 2, 2022 Ok could you suggest any for me im pretty well out my depth on this one Regards Baz Link to comment Share on other sites More sharing options...
barrie greenwood Posted October 2, 2022 Author Share Posted October 2, 2022 I'm using a nikon d90 and a skywatcher 200p no Focal reducer or anything else at the min Link to comment Share on other sites More sharing options...
sharkmelley Posted October 2, 2022 Share Posted October 2, 2022 Baader, Astronomik and many other manufacturers of astro-accessories produce a range of IR/UV blocking filters in different sizes, including clip-in filters. Link to comment Share on other sites More sharing options...
barrie greenwood Posted October 2, 2022 Author Share Posted October 2, 2022 5 minutes ago, sharkmelley said: Baader, Astronomik and many other manufacturers of astro-accessories produce a range of IR/UV blocking filters in different sizes, including clip-in filters. Ok so what would be the best filter to look out for please forgive the noobness Link to comment Share on other sites More sharing options...
sharkmelley Posted October 2, 2022 Share Posted October 2, 2022 38 minutes ago, barrie greenwood said: Ok so what would be the best filter to look out for please forgive the noobness You won't go far wrong with the Astronomik L-2 filter - it's the one I use. But there are many other alternatives. Link to comment Share on other sites More sharing options...
barrie greenwood Posted October 6, 2022 Author Share Posted October 6, 2022 On 02/10/2022 at 16:41, sharkmelley said: You won't go far wrong with the Astronomik L-2 filter - it's the one I use. But there are many other alternatives. Ok so I'm using a nikon d0 cropped sensor and can't find a filter that clips in . Can I mount the filter into the adaptor that fixes the camera body to the scope Link to comment Share on other sites More sharing options...
sharkmelley Posted October 6, 2022 Share Posted October 6, 2022 (edited) 3 hours ago, barrie greenwood said: Can I mount the filter into the adaptor that fixes the camera body to the scope It depends on the adaptor you are using. Some are designed to accept 1.25" or 2" filters but other adaptors cannot accept filters. You need to check what adaptor you have. Edited October 6, 2022 by sharkmelley Link to comment Share on other sites More sharing options...
alacant Posted October 6, 2022 Share Posted October 6, 2022 (edited) 2 hours ago, barrie greenwood said: mount the filter into the adaptor that fixes the camera body to the scope Hi We can't tell because we don't know which which adapter you are using. The 200p comes with both 1.25" and 2" adapters. So either This or this.will get you there. HTH Edited October 6, 2022 by alacant Link to comment Share on other sites More sharing options...
barrie greenwood Posted October 6, 2022 Author Share Posted October 6, 2022 This is what I'm using the inner thread is bigger than 1.25 but not 2inch Link to comment Share on other sites More sharing options...
alacant Posted October 6, 2022 Share Posted October 6, 2022 (edited) 2 hours ago, barrie greenwood said: bigger than 1.25 but not 2inch Either a clip in filter for your camera or 2" filter + double sided tape: Edited October 6, 2022 by alacant Link to comment Share on other sites More sharing options...
barrie greenwood Posted October 6, 2022 Author Share Posted October 6, 2022 43 minutes ago, alacant said: Either a clip in filter for your camera or 2" filter, double sided tape: Brilliant so I want to be getting the heart nebula in the browns etc instead of the reds so what filter would I need is it just a uv cut or a ha filter etc I'm new to the filter thing so know nothing about it at all Link to comment Share on other sites More sharing options...
alacant Posted October 6, 2022 Share Posted October 6, 2022 (edited) 18 minutes ago, barrie greenwood said: a uv cut The one you need to begin with is an ir cut. These usually include a UV cut off too. The latter is not needed for your reflector, but neither will it do any harm. Rather than Ha, which will give you monochrome (process in shades of any single colour you like), try a UHC. Links to ir the filters here. UHC from the same source. HTH Edited October 6, 2022 by alacant Link to comment Share on other sites More sharing options...
sharkmelley Posted October 7, 2022 Share Posted October 7, 2022 11 hours ago, barrie greenwood said: Brilliant so I want to be getting the heart nebula in the browns etc instead of the reds The Heart Nebula will look red (and not brown) using a H-alpha mod or using an IR/UV blocking filter with a full-spectrum mod. Unmodified, it is pinkish-red. Link to comment Share on other sites More sharing options...
barrie greenwood Posted October 7, 2022 Author Share Posted October 7, 2022 How do I get it to be in this colour range is this a combination of different filters etc Link to comment Share on other sites More sharing options...
carastro Posted October 7, 2022 Share Posted October 7, 2022 The image you posted will have been done with a mono camera and filters. There is I believe an option to image in narrowband with a dual band filter, I think some of them come as a clip in filter. I have never used one so others would need to advise. Carole Link to comment Share on other sites More sharing options...
barrie greenwood Posted October 7, 2022 Author Share Posted October 7, 2022 Okso the oiii filters what do they produce. Just want to get a feel of which I'd the best one to purchase Link to comment Share on other sites More sharing options...
sharkmelley Posted October 8, 2022 Share Posted October 8, 2022 22 hours ago, barrie greenwood said: How do I get it to be in this colour range is this a combination of different filters etc It looks like a false colour "Hubble Palette" image produced with 3 different narrowband filters (SII, H-alpha, OIII) which are then combined, one filter for each colour channel. Although it is possible to do this with a full-spectrum DSLR, it is not easy because it complicates both the acquisition and the processing. I strongly recommend starting off by taking "normal colour" images with an IR/UV blocking filter on your modified camera. Link to comment Share on other sites More sharing options...
barrie greenwood Posted October 8, 2022 Author Share Posted October 8, 2022 Hi mate ok just been looking at a 685 nm 2 inch ir pass filter on amazon it does however say its for planetary photos moon etc . Will this do for dso as well and also will it help with moon glare when it's up when i image dso or do I need a different wavelength I already have some ir filters for landscapes etc but they are at the 720 850 and 900 nm and I think this would only get bw at this higher end This is the link to the one I'm looking at Svbony SV183 IR Pass Filter 2in, 685nm Astrophotography Filter, Infrared Telescope Filter for Photographing Moon Planetary Nature Scenery https://amzn.eu/d/40cJ5k7 Regards Baz Link to comment Share on other sites More sharing options...
alacant Posted October 8, 2022 Share Posted October 8, 2022 (edited) 22 minutes ago, barrie greenwood said: Will this do for dso That will cut the vast majority of visible light; for dsos probably not what you want. The easiest and cheapest way to approximate the blue/yellow false colour stuff on an osc is to split and recombine the channels from a UHC filtered image. But if this is your first attempt at deep sky, perhaps better to go with a longer wavelength ir cut filter (links above) and treat the camera as a standard astronomically modified version. In so doing record all the visible wavelengths whilst eliminating the fuzz from the out of focus ir. Even then, as you can see from your image, stars are well focused and without blur so unless you're planning to use a refractor, to begin with you probably don't need one as colour is easily corrected in processing. HTH Edited October 8, 2022 by alacant Link to comment Share on other sites More sharing options...
barrie greenwood Posted October 8, 2022 Author Share Posted October 8, 2022 (edited) 1 hour ago, alacant said: That will cut the vast majority of visible light; for dsos probably not what you want. The easiest and cheapest way to approximate the blue/yellow false colour stuff on an osc is to split and recombine the channels from a UHC filtered image. But if this is your first attempt at deep sky, perhaps better to go with a longer wavelength ir cut filter (links above) and treat the camera as a standard astronomically modified version. In so doing record all the visible wavelengths whilst eliminating the fuzz from the out of focus ir. Even then, as you can see from your image, stars are well focused and without blur so unless you're planning to use a refractor, to begin with you probably don't need one as colour is easily corrected in processing. HTH Yeah the links above won't ship to the UK. What about this one https://amzn.eu/d/9QuODDJ Edited October 8, 2022 by barrie greenwood Link to comment Share on other sites More sharing options...
sharkmelley Posted October 8, 2022 Share Posted October 8, 2022 Just to be clear here, in case there is any remaining confusion. There are IR pass filters and there are IR blocking filters. For astrophotography, an IR PASS filter is only useful for planetary and lunar imaging where you don't want any colour information from the visible spectrum. An IR BLOCKING filter (or IR/UV blocking filter) is what you need for DSO imaging. Mark Link to comment Share on other sites More sharing options...
alacant Posted October 8, 2022 Share Posted October 8, 2022 8 hours ago, barrie greenwood said: the links above won't ship to the UK AliExpress don't ship to UK? I never realised that. Sorry. 8 hours ago, barrie greenwood said: What about this one Not suitable for deep sky objects. Maybe someone on the ground in UK could reveal the secret of getting a simple everyday 2" ir cut filter to you. Cheers. Link to comment Share on other sites More sharing options...
teoria_del_big_bang Posted October 8, 2022 Share Posted October 8, 2022 (edited) 11 minutes ago, alacant said: AliExpress don't ship to UK? I never realised that. Sorry. Really ? Is that a result of Brexit then as they certainly used to ? Shame as so long as you were not in a rush for something they were quite good for some accesories. Ah AliExpress do ship to UK, I thought they still did, it was just that particular seller on AliExpress that did not ship to UK, pleanty of other seller selling similar do. Steve Edited October 8, 2022 by teoria_del_big_bang Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now