CEM 26 in APT instructions?

[Look left]

Has anyone installed the CEM 26 in APT and got it to work,if so how?

i,be tried in both WIFI and USB but no luck. I,be got the Ioptron commander on Ascom and it works both ways on its own.

i then go into APT and connect scope with Ascom it identifies the mount CEM 26 then if you go properties it says that the mount is being controlled through the Commander so you say OK. It recognises the mount and puts in the RA and Dec positions but when you try and use the NSEW controls it comes up error message and nothing happens.

Edited March 10, 2021 by Look left

[david_taurus83]

Have you tried to slew to a target using the list in APT? 

[Paul M]

What did the error messages say?

I always use the ASCOM panel if I want to slew manually because I've had some unpredictable behavior with the slew buttons in APT using my NEQ6 Pro mount. Everything else works fine with APT, just the slew buttons "stick" or don't respond sometimes. I don't remember any error messages being produced though. 

[Look left]

Brown Dwarf and Trailer Trash - Bingo it works and slews to target using the Go to  hadn't tried it so thanks for pointing me in the right direction. I just tried the arrow buttons, !!! Now I,m fairly confident I can Plate solve and use Goto etc , that's whenever I can next see a star !!!