Star101 Posted August 26, 2019 Share Posted August 26, 2019 With the heat being a little on the high side, my Darks have struggled and I had to create new ones. I normally image at -20C but had to reduce that to -10C as camera would only get down to -16C and -16C is not my prefered number This is only half of the data collected because of issues with Darks I have not had chance to process all the data. Maybe get chance in a day or two.15 x 300s Ha, OIII and only 4 x SII, Not sure why it did not process the rest....Its been a HOT few days......Not that I am complaining Anyway, here we have my first rendition of Ced 214. Taken with TS 65EQ and ZWO ASI 183mm Pro on MESU 200 mount. ZWO OAG with Lodestar X2. SGPro and Pixinsight software. Thanks for looking. 3 Link to comment Share on other sites More sharing options...
ApophisAstros Posted August 27, 2019 Share Posted August 27, 2019 (edited) Hi, i have that camera as well and wondered what the Temp was as its 17oC here at 3.30 am and the camera has been dead on -20c all night. Regards Roger BTW i am doing 900s subs Worthing, England. Edited August 27, 2019 by apophisOAS 1 Link to comment Share on other sites More sharing options...
Star101 Posted August 27, 2019 Author Share Posted August 27, 2019 The night before, I could not get the camera below -17C. Last night it would do -20C no problem....I never looked into it as I assumed it must be the weather. It was 26C at 9pm then. I know because my neighbour was lighting a fire to sit around. It could have been the power source as I have it connected to a +12V cig charger plug! I just decided to run at -10C cos it was easy to attain. Link to comment Share on other sites More sharing options...
Buzzard75 Posted August 27, 2019 Share Posted August 27, 2019 Can you give me an idea of what was your workflow steps were? I tried this same object and my Ha data just completely overpowered all the OIII and SII data I had even after using Linear Fit. 1 Link to comment Share on other sites More sharing options...
Star101 Posted August 27, 2019 Author Share Posted August 27, 2019 Dave_Galera posted this link for me in one of my other posts. https://youtu.be/RZZ4UlIQk0s I used this 1 Link to comment Share on other sites More sharing options...
Buzzard75 Posted August 28, 2019 Share Posted August 28, 2019 5 hours ago, Star101 said: Dave_Galera posted this link for me in one of my other posts. https://youtu.be/RZZ4UlIQk0s I used this That helped out soooo much. It was the color masks that I was missing. When I did the SHO palette everything was green. Everything! I couldn't figure out how people were getting these beautiful reds, golds and blues. I still have a bit of green in it, but I'm much happier with it. Thanks! 1 Link to comment Share on other sites More sharing options...
Star101 Posted August 28, 2019 Author Share Posted August 28, 2019 6 hours ago, Buzzard75 said: That helped out soooo much. It was the color masks that I was missing. When I did the SHO palette everything was green. Everything! I couldn't figure out how people were getting these beautiful reds, golds and blues. I still have a bit of green in it, but I'm much happier with it. Thanks! I'm glad it helped. That's what this forum is here for Link to comment Share on other sites More sharing options...
dave_galera Posted August 28, 2019 Share Posted August 28, 2019 I am glad it worked for you, its the workflow I now use 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now