Cable replacement

[recceranger]

Guys,

I am trying to upgrade my synscan with the latest firmware edition. However, because I'm an eejit I seem to have misplaced my cable!

Can anyone offer advice on how I can replace? I have been on the internet and there are plenty of RJ 11 cables around but the one the comes with the synscan handset has 2 differing end fittings (both male) that slot into handset and laptop 

Rick

[brantuk]

Try here Rick: http://astronomiser.co.uk/cables.htm

Hth

[Knighty2112]

You can get a Skywatcher cable to do the firmware from FLO.

https://www.firstlightoptics.com/celestron-mounts/serial-cable-for-skywatcher-and-celestron-mounts.html

Remember you'll also need a USB to serial cable too to allow connection to the PC/laptop with the above cable if you don't have an RS232 port on the PC/laptop, which can also be gotten from FLO too as well.

https://www.firstlightoptics.com/celestron-mounts/sky-watcher-synscan-usb-to-serial-rs-232-cable.html

[recceranger]

Guys,

thats sorted - many thanks

???