Olympus EM10 MkII T ring

[Clairelm1]

Anyone use olympus and know which T ring I need?

I use celestron astromaster 130EQ with 1.25" EP's.

Many thanks

[michael8554]

This camera has a "micro 4/3rds mount", so if you google for "T2 Mount for micro 4/3rds" you'll get some hits.

Seems to be a different mount to a "4/3rds mount".

Michael

[Chinapig]

Yup, I use an OMD EM5, which also has the same mount.  As Michael says, it has a micro four-thirds mount, and you will need the appropriate T-ring to suit your camera, plus a T-ring to 1.25" adapter.

I use this T-ring:

http://www.365astronomy.com/T-Ring-Micro-Four-Thirds-T2-Lens-Adapter-Ring-for-Micro-4-3-dSLR-Cameras-WITHOUT-EXTENSION.html

Hope that helps - best of luck!

Cheers

Simon

 

 

 

 

[Clairelm1]

On 14 July 2016 at 00:10, Chinapig said:

Yup, I use an OMD EM5, which also has the same mount.  As Michael says, it has a micro four-thirds mount, and you will need the appropriate T-ring to suit your camera, plus a T-ring to 1.25" adapter.

I use this T-ring:

http://www.365astronomy.com/T-Ring-Micro-Four-Thirds-T2-Lens-Adapter-Ring-for-Micro-4-3-dSLR-Cameras-WITHOUT-EXTENSION.html

Hope that helps - best of luck!

Cheers

Simon

 

 

 

 

So one of them and a T-rint to 1.25" adapter?

 

Many thanks

[Grierson]

FLO do a micro 4/3 T piece.

[Clairelm1]

On 27 July 2016 at 20:39, Grierson said:

FLO do a micro 4/3 T piece.

I did buy from flo, the micro 4/3rd and the T-1.25 but I can't for the life of me figure out how it works. The image is just black :?

[Atreta]

maybe this is a focus issue. try pointing it to the moon and see if you can get it to show on screen it's also easier to focus on the moon when starting. 

[Clairelm1]

We figured it out, the lens centering pin wasn't quite inserted properly into the adapter and so the camera didn't think it was attached. But I got to play a little with the moon.

[hitmanh]

Very nice, I'm using a Panasonic GH3, also micro 4/3s, and getting some excellent shots of the moon at the moment.