Alienfox Posted July 24, 2015 Share Posted July 24, 2015 I am currently have the opportunity to buy a SW EQ5 mount and RA?DEC motors, my question is if I buy a Syncscan V.3 handset what else do I need to make this a goto tracking mount?Thanks Link to comment Share on other sites More sharing options...
Cornelius Varley Posted July 24, 2015 Share Posted July 24, 2015 If the motors are the basic dual axis variety then you need the full goto upgrade kit which includes replacement stepper motors (the d/a motors aren't suitable for this), a motor control board and the Synscan handset. Link to comment Share on other sites More sharing options...
spaceman_spiff Posted July 24, 2015 Share Posted July 24, 2015 Yes, the goto upgrade contains a motor driver that provides the motor inputs, it is also the point that an auto guider can be plugged in later. I don't think you can bypass this and get the synscan handset directly driving the motors.Hope that helps Link to comment Share on other sites More sharing options...
Tinker1947 Posted July 24, 2015 Share Posted July 24, 2015 Not sure if the version 3 handset is still on sale, there might be old stock, the newer Version 4 is the current handset, i believe the only difference is the loss of the external power socket on the Version 4 so the handset can only be powered by the mount. Link to comment Share on other sites More sharing options...
Alienfox Posted July 27, 2015 Author Share Posted July 27, 2015 Thanks guys. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.