shirva Posted April 21, 2013 Share Posted April 21, 2013 hi can the basic heq5 that flow sells be fitted with the synscan handset from the eq3/2 pro mount....cheers davy Link to comment Share on other sites More sharing options...
Astro_Baby Posted April 22, 2013 Share Posted April 22, 2013 No...they are totally different. Link to comment Share on other sites More sharing options...
shirva Posted April 22, 2013 Author Share Posted April 22, 2013 Thanks...one more then can it be controlled by eqmod. ..Davy Link to comment Share on other sites More sharing options...
Merlin66 Posted April 22, 2013 Share Posted April 22, 2013 If it can't be fitted with a synscan controller then the motors and motherboard are no good for EQmod either....you'd need a major upgrade... Link to comment Share on other sites More sharing options...
shirva Posted April 22, 2013 Author Share Posted April 22, 2013 Cheers Link to comment Share on other sites More sharing options...
edjrgibbs Posted April 26, 2013 Share Posted April 26, 2013 Hi ShirvaThe syntrek version will work without any problems and can also be used with EQMOD and stellarium/CDC via an EQDirect module or through your synscan handset.Ed Link to comment Share on other sites More sharing options...
shirva Posted April 27, 2013 Author Share Posted April 27, 2013 Cheers ed..I had more of a look at the basic heq5 the upgrade is 300 pounds it has a mother board motors and hand set cheaper investment is as you say the syntreke model...may just go for the eq5pro just trying to upgrade a bit from eq3 /2 pro.....thanks for help folks..Davy Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.