iwols

same problem here loking at a daystar ds 60 lunt 40 or lunt 50 for imaging but not sure which button to press so pressing none at the minute ,watching this thread with interest

any suggestions please😃

Hi all looking at a solar setup but just wondered what you would recommend ,already have a C8 edge which i think is a no no,and i already have a ts optics quad 100mm,just wondered what you guys recommend/suggest for the most cost effective/image quality route would be thanks

thanks michael is that where it says dc

hi must say im getting obsessed with flats,i know nina tells you the average adu of a flat frame with its wizard but how do i check certain parts of the image itself if that makes sense thanks

Thanks I'm using a 414ex

im using a tracing panel light for the top one and a dedicated geoptic light panel for the bottom using nina flat frame wizard on both ,its just that the bottom one looks more even to me after i have stretched them both?

testing different ways of capturing flats with nina,which would you choose 1 top left then right stretched then second bottom left then to the right stretched thanks both within adu values

well another attempt any thoughts please

hi all been using an illuminated tracing panel for my flats but not convinced just looking at the Geoptik Flat Field Generator panel anyone have any comments please

thanks ivor appreciated,that looks good for 5 mins per filter,def need more pi knowledge

Thank you very much Ivor i think youve hit the nail on the head with various comments,im using the c8 edge now for a while instead of my ts optics,which doesnt help and the sombrero was very low just above a bungalow and maybe just below my obsy wall,add that to a few low clouds and my lack of pixinsight skills adds to something im not going to achieve,just done a very quick process with just 3x5 mins worth of subs LRGB with NGC 4565 and got this so dont think my processing is a million miles off(for me anyway)??.Any thoughts?Once again thank you

https://www.dropbox.com/sh/cusk6p3h6vb742z/AADW1I9t4hHYe3tMZrytpQtPa?dl=0 hi thanks Ivor and link to original subs

hi after struggling with pi for a long time decided to start at the basics do i have anything missing from a basic workflow thanks

well this is my poor attempt after 3 hours processing Image11.tif

Thanks again still problems with my pi processing skills(or lack off),still trying to find my workflow

ive always imaged at 300 secs per sub but how do you know what is the perfect length for your subs please

hi can anyone process my master lights with pixinsight,to make sure they are ok thanks,im useless at processing and my image was terrible ,need to know im going in the right direction https://www.dropbox.com/sh/qg3ognp3ff8saam/AABb7QqGpdVCcfpMQuizPnVWa?dl=0

just need to find a LS60 at a reasonable price now thanks guys😬

in fact just tried them and they are not working now,did the ini update you suggested in a previous post a while ago and seem to be working now,first time ive tried for a few weeks,thanks....really need to try having a go with different data but worried about messing my working system up ,any suggestions on what would be the easiest to have a go at,does EUMETCastView process any data i am likely to be receiving ,cheers Alan

great image alan,very reluctant to try anything apart from my channel 2 reception 😬

hi all apart from the price does anyone have any comments on these 3 for imaging thanks

some great images on your site,could you tell me what you used for the first image dated SOL IN H⍺ – 29 AUGUST 2021,thats the kind of image i would love to capture thanks

Thanks Hughsie i see you have both,but what is the lunt 50 like compared to your lunt ls60 please?

Hi Alan an eye opener as always thanks for sharing ,what software are you using for the processing,cheers